Improving precision for detecting change in the shape of the cornea in patients with keratoconus

To investigate a method for precision analysis to discriminate true corneal change from measurement imprecision in keratoconus (KC). Thirty patients with KC and 30 healthy controls were included. Coefficients of repeatability and limits of agreement (LOA) were compared using multiple measurements for inter-observer and inter-device agreement with the Pentacam HR, Orbscan IIz, and Tomey Casia SS-1000. Correlation of repeated measurements was evaluated using a linear mixed effect model (also called random effect model). A formula was derived for the theoretical expected change in precision and compared with measured change. Correlation between measurements from the same eye was small (R = 0.13). The 99.73% LOA (3 SD) of the mean of three measurements, provided better precision than 95% LOA (2 SD) of single cut-off values as expected from statistical theory for uncorrelated measurements for evidence of a significant change in corneal shape in patients with keratoconus. This enabled the determination of cut-off values for the detection of true change in corneal shape. The mean of three repeated measurements will provide better precision when there is minimal correlation. Three (rather than two) standard deviations provides a precise estimate of the LOA within or between observers and can be used as a reliable measure for identifying stage-independent corneal shape changes (progression) in keratoconus

Flood Risk Assessment for Urban Drainage System in a Changing Climate Using Artificial Neural Network

Changes in rainfall patterns due to climate change are expected to have negative impact on urban drainage systems, causing increase in flow volumes entering the system. In this paper, two emission scenarios for greenhouse concentration have been used, the high (A1FI) and the low (B1). Each scenario was selected for purpose of assessing the impacts on the drainage system. An artificial neural network downscaling technique was used to obtain local-scale future rainfall from three coarse-scale GCMs. An impact assessment was then carried out using the projected local rainfall and a risk assessment methodology to understand and quantify the potential hazard from surface flooding. The case study is a selected urban drainage catchment in northwestern England. The results show that there will be potential increase in the spilling volume from manholes and surcharge in sewers, which would cause a significant number of properties to be affected by flooding

Magnetic and electronic phase transitions probed by nanomechanical resonators

The reduced dimensionality of two-dimensional (2D) materials results in characteristic types of magnetically and electronically ordered phases. However, only few methods are available to study this order, in particular in ultrathin insulating antiferromagnets that couple weakly to magnetic and electronic probes. Here, we demonstrate that phase transitions in thin membranes of 2D antiferromagnetic FePS3, MnPS3 and NiPS3 can be probed mechanically via the temperature-dependent resonance frequency and quality factor. The observed relation between mechanical motion and antiferromagnetic order is shown to be mediated by the specific heat and reveals a strong dependence of the Néel temperature of FePS3 on electrostatically induced strain. The methodology is not restricted to magnetic order, as we demonstrate by probing an electronic charge-density-wave phase in 2H-TaS2. It thus offers the potential to characterize phase transitions in a wide variety of materials, including those that are antiferromagnetic, insulating or so thin that conventional bulk characterization methods become unsuitable

Search for anomalous t t-bar production in the highly-boosted all-hadronic final state

A search is presented for a massive particle, generically referred to as a Z', decaying into a t t-bar pair. The search focuses on Z' resonances that are sufficiently massive to produce highly Lorentz-boosted top quarks, which yield collimated decay products that are partially or fully merged into single jets. The analysis uses new methods to analyze jet substructure, providing suppression of the non-top multijet backgrounds. The analysis is based on a data sample of proton-proton collisions at a center-of-mass energy of 7 TeV, corresponding to an integrated luminosity of 5 inverse femtobarns. Upper limits in the range of 1 pb are set on the product of the production cross section and branching fraction for a topcolor Z' modeled for several widths, as well as for a Randall--Sundrum Kaluza--Klein gluon. In addition, the results constrain any enhancement in t t-bar production beyond expectations of the standard model for t t-bar invariant masses larger than 1 TeV.Comment: Submitted to the Journal of High Energy Physics; this version includes a minor typo correction that will be submitted as an erratu

Search for new physics with same-sign isolated dilepton events with jets and missing transverse energy

A search for new physics is performed in events with two same-sign isolated leptons, hadronic jets, and missing transverse energy in the final state. The analysis is based on a data sample corresponding to an integrated luminosity of 4.98 inverse femtobarns produced in pp collisions at a center-of-mass energy of 7 TeV collected by the CMS experiment at the LHC. This constitutes a factor of 140 increase in integrated luminosity over previously published results. The observed yields agree with the standard model predictions and thus no evidence for new physics is found. The observations are used to set upper limits on possible new physics contributions and to constrain supersymmetric models. To facilitate the interpretation of the data in a broader range of new physics scenarios, information on the event selection, detector response, and efficiencies is provided.Comment: Published in Physical Review Letter

Performance of the CMS Cathode Strip Chambers with Cosmic Rays

The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device in the CMS endcaps. Their performance has been evaluated using data taken during a cosmic ray run in fall 2008. Measured noise levels are low, with the number of noisy channels well below 1%. Coordinate resolution was measured for all types of chambers, and fall in the range 47 microns to 243 microns. The efficiencies for local charged track triggers, for hit and for segments reconstruction were measured, and are above 99%. The timing resolution per layer is approximately 5 ns

Changes in the incidence of occupational disability as a result of back and neck pain in the Netherlands

BACKGROUND: Back pain (including neck pain) is one of the most prevalent health problems for which physicians are consulted. Back pain can decrease the quality of life considerably during a great part of the lives of those who suffer from it. At the same time it has an enormous economic impact, mainly through sickness absence and long-term disability. The objective of this paper is to compare the incidence of occupational disability as a result of back and neck pain in 1980–1985 to 1999–2000 and to explain the findings. METHODS: A descriptive study was performed at population level of changes in incidence of occupational disability as a result of back and neck pain. Statistics from the National Institute of Social Insurance in the Netherlands are used to calculate age and gender specific incidence rates for back pain diagnoses based on the ICD-classification. Incidence rate ratios stratified according to gender and adjusted for age were calculated to indicate changes over time. RESULTS: The incidence of occupational disability as a result of back pain decreased significantly by 37% (95% CI 37%–38%) in men and with 21% (95% CI 20%–24%) in women, after adjustment for age. For overall occupational disability as a result of all diagnoses this was 18% (95% CI 18%–19%) and 34% (95% CI 33%–35%) respectively. Changes were not homogeneous over diagnostic subcategories and age groups. Spondylosis decreased most in men by 59% (95% CI 57%–61%). The incidence of non-specific back pain and neck pain increased most by 196% (95% CI 164%–215%). Post-laminectomy syndrome increased over all age categories both for men (85%, 95% CI 61%–113%) and women (113%, 95% CI 65%–179%). CONCLUSION: The decrease in occupational disability as a result of back pain was larger than the decrease in occupational disability over all diagnoses. However, time trends were not homogeneous over age-, nor over sex- nor back pain categories. Most of this decrease was due to general changes such as legal and economic changes. One of several additional explanations for a decrease is the changed view on management of back pain

Strengthening mechanisms in thermomechanically processed NbTi-microalloyed steel

The effect of deformation temperature on microstructure and mechanical properties was investigated for thermomechanically processed NbTi-microalloyed steel with ferrite-pearlite microstructure. With a decrease in the finish deformation temperature at 1348 K to 1098 K (1075 °C to 825 °C) temperature range, the ambient temperature yield stress did not vary significantly, work hardening rate decreased, ultimate tensile strength decreased, and elongation to failure increased. These variations in mechanical properties were correlated to the variations in microstructural parameters (such as ferrite grain size, solid solution concentrations, precipitate number density and dislocation density). Calculations based on the measured microstructural parameters suggested the grain refinement, solid solution strengthening, precipitation strengthening, and work hardening contributed up to 32 pct, up to 48 pct, up to 25 pct, and less than 3 pct to the yield stress, respectively. With a decrease in the finish deformation temperature, both the grain size strengthening and solid solution strengthening increased, the precipitation strengthening decreased, and the work hardening contribution did not vary significantly

T-Cell Artificial Focal Triggering Tools: Linking Surface Interactions with Cell Response

T-cell activation is a key event in the immune system, involving the interaction of several receptor ligand pairs in a complex intercellular contact that forms between T-cell and antigen-presenting cells. Molecular components implicated in contact formation have been identified, but the mechanism of activation and the link between molecular interactions and cell response remain poorly understood due to the complexity and dynamics exhibited by whole cell-cell conjugates. Here we demonstrate that simplified model colloids grafted so as to target appropriate cell receptors can be efficiently used to explore the relationship of receptor engagement to the T-cell response. Using immortalized Jurkat T cells, we monitored both binding and activation events, as seen by changes in the intracellular calcium concentration. Our experimental strategy used flow cytometry analysis to follow the short time scale cell response in populations of thousands of cells. We targeted both T-cell receptor CD3 (TCR/CD3) and leukocyte-function-associated antigen (LFA-1) alone or in combination. We showed that specific engagement of TCR/CD3 with a single particle induced a transient calcium signal, confirming previous results and validating our approach. By decreasing anti-CD3 particle density, we showed that contact nucleation was the most crucial and determining step in the cell-particle interaction under dynamic conditions, due to shear stress produced by hydrodynamic flow. Introduction of LFA-1 adhesion molecule ligands at the surface of the particle overcame this limitation and elucidated the low TCR/CD3 ligand density regime. Despite their simplicity, model colloids induced relevant biological responses which consistently echoed whole cell behavior. We thus concluded that this biophysical approach provides useful tools for investigating initial events in T-cell activation, and should enable the design of intelligent artificial systems for adoptive immunotherapy