XML Data Compression

Tato diplomová práce se zabývá problematikou komprese XML dat. Popisuje charakteristiku a důležité pojmy XML jazyka, stejně tak AIXM, jakožto formát XML. Dokumentuje současné kompresní mechanizmy XML a rozděluje je do patřičných skupin. Dále se realizuje testování komprese XML za použití zmíněných metod a vyhodnocení výsledků. S přihlédnutím na zpracované údaje je vytvořena a prezentována aplikace, která za pomoci analýzy dat jednotlivých elementů umožňuje ztrátovou i bezeztrátovou kompresi AIXM. To vše s uživatelskými možnostmi výběru AIXM objektů a způsobu výsledné komprese.This master’s thesis is dealing with problems of XML data compression. It describes a characterization and important concepts of XML language as well as AIXM as XML data format. It documents contemporary compression methods of XML and divides them into appropriate groups. Thereinafter a testing of XML data compression using mentioned methods and evaluation of results is implemented. With a consideration of processed data there is created and presented an application which enables lossy and lossless compression of AIXM with the help of particular elements data analysis. All of it with user selection options of AIXM objects and way of resultant compression.

Linear system stability analysis

Tato bakalářská práce se bude zabývat analýzou stability lineárních systémů. V teoretické části bude zmíněna stabilita a její podmínky, kritéria stability, jejich rozdělení do skupin a popis jednotlivých kritérií. V praktické části se vybere jedno kritérium stability se kterým se následně bude pracovat. Zkoumaným obvodem bude filtr s proudovými konvejory, jakožto aktivními prvky, ze kterého bude získán charakteristický polynom. V příkladech se bude pracovat s přenosovými funkcemi aktivních prvků prvního i druhého řádu. Bude vytvořen program, který umožní automatizovat Routhovo kritérium stability a vykreslení grafických výstupů v závislosti na vstupních parametrech a jejich hodnotách.This bachelor’s thesis will be dealing with stability analysis of linear systems. In theoretical part will be mentioned stability and its conditions, stability criteria, their partition to groups and description of each criterion. In practical part will be chosen one stability criterion which will be working with afterwards. As examined circuit will be a filter with current conveyors as active elements which will be obtained a characteristic multinomial from. There will be working with transmittion functions of single and double pole model in examples. It will be created a computer programme which will enable an automatization of Routh’s stability criterion and plot graphical outputs in dependence on input parameters and their values.

Massage-induced morphological changes of dense connective tissue in rat’s tendon

The aim of the experiment was to determine if possible changes in connective tissue induced by massage could have a positive effect justifing the use of massage in all post-traumatic connective tissue conditions, e.g. tendon injuries. The investigations were performed in a group of 18 Buffalo rats. The rats were divided into two groups (experimental and control). To standardize the massage procedure, it was performed with an algometer probe of 0.5 cm2 with constant pressure force of 1 kG (9,81 N). To analyse the number and diameter of collagen fibrils, two electron micrographs were performed for each rat of the collected segments of tendons of rat tail lateral extensor muscle. After image digitalization and calibration, the measurements were carried out using iTEM 5.0 software. The number of fibrils, their diameter and area were measured in a cross-sectional area. An increase of the number of collagen fibrils was observed in the tendons of massaged animals compared to the control group. Our study demonstrated that massage may cause a beneficial effect on metabolic activity of tendon’s fibroblasts and, in consequence, may be applied for more effective use of massage for the prevention of tendon injury as well as after the injury has occurred. (Folia Histochemica et Cytobiologica 2013, Vol. 51, No. 1, 103–106

Novel multicomponent organic-inorganic WPI/gelatin/CaP hydrogel composites for bone tissue engineering

The present work focuses on the development of novel multicomponent organic‐inorganic hydrogel composites for bone tissue engineering. For the first time, combination of the organic components commonly used in food industry, namely whey protein isolate (WPI) and gelatin from bovine skin, as well as inorganic material commonly used as a major component of hydraulic bone cements, namely α‐TCP in various concentrations (0‐70 wt.%) was proposed. The results showed that α‐TCP underwent incomplete transformation to calcium‐deficient hydroxyapatite (CDHA) during preparation process of the hydrogels. Microcomputer tomography showed inhomogeneous distribution of the calcium phosphate (CaP) phase in the resulting composites. Nevertheless, hydrogels containing 30‐70 wt.% α‐TCP showed significantly improved mechanical properties. The values of Young's modulus and the stresses corresponding to compression of a sample by 50% increased almost linearly with increasing concentration of ceramic phase. Incomplete transformation of α‐TCP to CDHA during preparation process of composites provides them high reactivity in simulated body fluid during 14‐day incubation. Preliminary in vitro studies revealed that the WPI/gelatin/CaP composite hydrogels support the adhesion, spreading, and proliferation of human osteoblast‐like MG‐63 cells. The WPI/gelatin/CaP composite hydrogels obtained in this work showed great potential for the use in bone tissue engineering and regenerative medicine applications

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

Search for displaced vertices arising from decays of new heavy particles in 7 TeV pp collisions at ATLAS

We present the results of a search for new, heavy particles that decay at a significant distance from their production point into a final state containing charged hadrons in association with a high-momentum muon. The search is conducted in a pp-collision data sample with a center-of-mass energy of 7 TeV and an integrated luminosity of 33 pb^-1 collected in 2010 by the ATLAS detector operating at the Large Hadron Collider. Production of such particles is expected in various scenarios of physics beyond the standard model. We observe no signal and place limits on the production cross-section of supersymmetric particles in an R-parity-violating scenario as a function of the neutralino lifetime. Limits are presented for different squark and neutralino masses, enabling extension of the limits to a variety of other models.Comment: 8 pages plus author list (20 pages total), 8 figures, 1 table, final version to appear in Physics Letters

Measurement of the polarisation of W bosons produced with large transverse momentum in pp collisions at sqrt(s) = 7 TeV with the ATLAS experiment

This paper describes an analysis of the angular distribution of W->enu and W->munu decays, using data from pp collisions at sqrt(s) = 7 TeV recorded with the ATLAS detector at the LHC in 2010, corresponding to an integrated luminosity of about 35 pb^-1. Using the decay lepton transverse momentum and the missing transverse energy, the W decay angular distribution projected onto the transverse plane is obtained and analysed in terms of helicity fractions f0, fL and fR over two ranges of W transverse momentum (ptw): 35 < ptw < 50 GeV and ptw > 50 GeV. Good agreement is found with theoretical predictions. For ptw > 50 GeV, the values of f0 and fL-fR, averaged over charge and lepton flavour, are measured to be : f0 = 0.127 +/- 0.030 +/- 0.108 and fL-fR = 0.252 +/- 0.017 +/- 0.030, where the first uncertainties are statistical, and the second include all systematic effects.Comment: 19 pages plus author list (34 pages total), 9 figures, 11 tables, revised author list, matches European Journal of Physics C versio

Observation of a new chi_b state in radiative transitions to Upsilon(1S) and Upsilon(2S) at ATLAS

The chi_b(nP) quarkonium states are produced in proton-proton collisions at the Large Hadron Collider (LHC) at sqrt(s) = 7 TeV and recorded by the ATLAS detector. Using a data sample corresponding to an integrated luminosity of 4.4 fb^-1, these states are reconstructed through their radiative decays to Upsilon(1S,2S) with Upsilon->mu+mu-. In addition to the mass peaks corresponding to the decay modes chi_b(1P,2P)->Upsilon(1S)gamma, a new structure centered at a mass of 10.530+/-0.005 (stat.)+/-0.009 (syst.) GeV is also observed, in both the Upsilon(1S)gamma and Upsilon(2S)gamma decay modes. This is interpreted as the chi_b(3P) system.Comment: 5 pages plus author list (18 pages total), 2 figures, 1 table, corrected author list, matches final version in Physical Review Letter