Electrification of Urban Freight Transport - a Case Study of the Food Retailing Industry

Decarbonisation is a major challenge for the coming decades, for all industries, including the transport sector. Battery electric vehicles are a potential solution for the transport sector to reduce its carbon impact. Asides from the question whether there is sufficient supply of electric vehicles for freight transport, it is also unclear whether battery-powered trucks meet the practical requirements, especially in terms of their driving range. To investigate this, synthetic tours were generated by solving a Vehicle Routing Problem (VRP). This also generates the fleet size and composition depending on a set of different vehicle types. The network with underlying traffic conditions comes from an publicly available transport model. The generated tours are then simulated with an open-source transport simulation (MATSim), for both diesel and battery electric vehicles (BEVs). In a sensitivity study, two different purchase prices were considered for calculating vehicle costs. The case study uses a model of the food retailing industry for the city of Berlin. 56% of the tours can be driven without recharging. When recharged one time, 90% of the tours are suitable for BEVs. The costs for transporting the goods will increase by 17 to 23% depending on the assumption for the purchase prices for the BEVs. Using a well-to-wheel calculation, the electrification of all tours leads to a reduction of greenhouse gas (GHG) emissions by 26 to 96% depending on the assumed electricity production.DFG, 398051144, Analyse von Strategien zur vollständigen Dekarbonisierung des urbanen Verkehr

How Driving Multiple Tours Affects the Results of Last Mile Delivery Vehicle Routing Problems

Solving Vehicle Routing Problems (VRPs) is one very important step for modeling and simulating urban freight transportation and especially urban last-mile delivery. It is observed in several studies, that tour plans consist of a very high number of vehicles needed because vehicles only drive one tour. For the next tour, a new vehicle with new fixed costs is needed. This also starts in the beginning of its temporal availability. This article intends to answer the question: how tour plan and fleet size changes when vehicles can reload at the depot and run another tour within its temporal availability. The possible effects are shown in two studies for Berlin: (i) food retailing delivery and (ii) parcel delivery for one district of Berlin. The studies have different designs and policy cases to see the effects under different situations. The present research shows that reloading within the delivery tour leads to a significant reduction of vehicles needed and therefore to lower costs for the carrier. If one tour is not limited by the vehicle’s capacity but by the vehicle’s temporal availability no saving can be observed. This was the case for parcel delivery with light parcel delivery trucks. When using smaller vehicles, e.g. cargo bicycles for last mile delivery from local city hubs, vehicle capacity is the limiting factor and therefore also significant saving can be observed. As another consequence it is possible to get rid of artificially inserted breaks in time-windows for more realistic traffic. The article also critically addresses the problem of increasing computation time.DFG, 323900421, Frachtführer und ihre Interaktionen mit dem Verkehrsflus

Potential of Private Autonomous Vehicles for Parcel Delivery

Using the same vehicles for both passenger and freight transport, to increase vehicle occupancy and decrease their number, is an idea that drives transport planners and is also being addressed by manufacturers. This paper proposes a methodology to simulate the behavior of such vehicles within an urban traffic system and evaluate their performance. The aim is to investigate the impacts of resignation from fleet ownership by a transport service company (TSC) operating on a city-wide scale. In the simulation, the service provider hires private autonomous cars for tour performance. Based on assumptions concerning the operation of such vehicles and TSCs, the software Multi-Agent Transport Simulation (MATSim) is extended to model vehicle and operator behavior. The proposed framework is applied to a case study of a parcel delivery service in Berlin serving a synthetic parcel demand. Results suggest that the vehicle miles traveled for freight purposes increase because of additional access and egress trips. Moreover, the number of vehicles en route is higher throughout the day. The lowering of driver costs can reduce the costs of the operator by approximately 74.5%. If the service provider additionally considers the resignation from fleet ownership, it might lower the operation cost by another 10%, not taking into account the costs of system transfer or risks like vehicle non-availability. From an economic perspective, the reduction of the overall number of vehicles in the system seems to be beneficial.BMVI, 16AVF2147, Potentiale Automatisierter Verkehrssysteme (PAVE

Agent-based modelling and simulation of tour planning in urban freight traffic

Freight traffic has grown in the last years and decades, and it is expected to grow further (see Schmiele et al. 2011; Stiegeler 2012). Especially in major cities, increasing levels of online-trade cause a shift toward smaller individual deliveries directly to the consumer (see Cerwenka et al. 2007). Supplying their own shops is of existential importance for classic retail groups. The creation of good or optimal tours is complicated significantly in areas with many destinations. Therefore, the aspect of tour planning is becoming more important for freight carriers. They strive to offer the highest possible service quality while at the same time keeping costs as low as possible (see Ehmke 2012)

Electrification of Urban Waste Collection: Introducing a Simulation-Based Methodology for Feasibility, Impact and Cost Analysis

We introduce a multi-agent-based simulation methodology to investigate the feasibility and evaluate environmental and economic sustainability of an electrified urban waste collection. Electrification is a potential solution for transport decarbonization and already widely available for individual and public transport. However, the availability of electrified commercial vehicles like waste collection vehicles is still limited, despite their significant contribution to urban emissions. Moreover, there is a lack of clarity whether electric waste collection vehicles can persist in real word conditions and which system design is required. Therefore, we present a synthetic model for waste collection demand on a per-link basis, using open available data. The tour planning is solved by an open-source algorithm as a capacitated vehicle routing problem (CVRP). This generates plausible tours which handle the demand. The generated tours are simulated with an open-source transport simulation (MATSim) for both the diesel and the electric waste collection vehicles. To compare the life cycle costs, we analyze the data using total cost of ownership (TCO). Environmental impacts are evaluated based on a Well-to-Wheel approach. We present a comparison of the two propulsion types for the exemplary use case of Berlin. And we are able to generate a suitable planning to handle Berlin’s waste collection demand using battery electric vehicles only. The TCO calculation reveals that the electrification raises the total operator cost by 16-30 %, depending on the scenario and the battery size with conservative assumptions. Furthermore, the greenhouse gas emissions (GHG) can be reduced by 60-99%, depending on the carbon footprint of electric power generation.DFG, 398051144, Analyse von Strategien zur vollständigen Dekarbonisierung des urbanen Verkehr

Fuel cell drive for urban freight transport in comparison to diesel and battery electric drives: a case study of the food retailing industry in Berlin

The option of decarbonizing urban freight transport using battery electric vehicle (BEV) seems promising. However, there is currently a strong debate whether fuel cell electric vehicle (FCEV) might be the better solution. The question arises as to how a fleet of FCEV influences the operating cost, the greenhouse gas (GHG) emissions and primary energy demand in comparison to BEVs and to Internal Combustion Engine Vehicle (ICEV). To investigate this, we simulate the urban food retailing as a representative share of urban freight transport using a multi-agent transport simulation software. Synthetic routes as well as fleet size and composition are determined by solving a vehicle routing problem. We compute the operating costs using a total cost of ownership analysis and the use phase emissions as well as primary energy demand using the well to wheel approach. While a change to BEV results in 17–23% higher costs compared to ICEV, using FCEVs leads to 22–57% higher costs. Assuming today’s electricity mix, we show a GHG emission reduction of 25% compared to the ICEV base case when using BEV. Current hydrogen production leads to a GHG reduction of 33% when using FCEV which however cannot be scaled to larger fleets. Using current electricity in electrolysis will increase GHG emission by 60% compared to the base case. Assuming 100% renewable electricity for charging and hydrogen production, the reduction from FCEVs rises to 73% and from BEV to 92%. The primary energy requirement for BEV is in all cases lower and for higher compared to the base case. We conclude that while FCEV have a slightly higher GHG savings potential with current hydrogen, BEV are the favored technology for urban freight transport from an economic and ecological point of view, considering the increasing shares of renewable energies in the grid mix.TU Berlin, Open-Access-Mittel - 2022DFG, 398051144, Analyse von Strategien zur vollständigen Dekarbonisierung des urbanen Verkehr

Differential cross section measurements for the production of a W boson in association with jets in proton–proton collisions at √s = 7 TeV

Measurements are reported of differential cross sections for the production of a W boson, which decays into a muon and a neutrino, in association with jets, as a function of several variables, including the transverse momenta (pT) and pseudorapidities of the four leading jets, the scalar sum of jet transverse momenta (HT), and the difference in azimuthal angle between the directions of each jet and the muon. The data sample of pp collisions at a centre-of-mass energy of 7 TeV was collected with the CMS detector at the LHC and corresponds to an integrated luminosity of 5.0 fb[superscript −1]. The measured cross sections are compared to predictions from Monte Carlo generators, MadGraph + pythia and sherpa, and to next-to-leading-order calculations from BlackHat + sherpa. The differential cross sections are found to be in agreement with the predictions, apart from the pT distributions of the leading jets at high pT values, the distributions of the HT at high-HT and low jet multiplicity, and the distribution of the difference in azimuthal angle between the leading jet and the muon at low values.United States. Dept. of EnergyNational Science Foundation (U.S.)Alfred P. Sloan Foundatio

Juxtaposing BTE and ATE – on the role of the European insurance industry in funding civil litigation

One of the ways in which legal services are financed, and indeed shaped, is through private insurance arrangement. Two contrasting types of legal expenses insurance contracts (LEI) seem to dominate in Europe: before the event (BTE) and after the event (ATE) legal expenses insurance. Notwithstanding institutional differences between different legal systems, BTE and ATE insurance arrangements may be instrumental if government policy is geared towards strengthening a market-oriented system of financing access to justice for individuals and business. At the same time, emphasizing the role of a private industry as a keeper of the gates to justice raises issues of accountability and transparency, not readily reconcilable with demands of competition. Moreover, multiple actors (clients, lawyers, courts, insurers) are involved, causing behavioural dynamics which are not easily predicted or influenced. Against this background, this paper looks into BTE and ATE arrangements by analysing the particularities of BTE and ATE arrangements currently available in some European jurisdictions and by painting a picture of their respective markets and legal contexts. This allows for some reflection on the performance of BTE and ATE providers as both financiers and keepers. Two issues emerge from the analysis that are worthy of some further reflection. Firstly, there is the problematic long-term sustainability of some ATE products. Secondly, the challenges faced by policymakers that would like to nudge consumers into voluntarily taking out BTE LEI

Penilaian Kinerja Keuangan Koperasi di Kabupaten Pelalawan

This paper describe development and financial performance of cooperative in District Pelalawan among 2007 - 2008. Studies on primary and secondary cooperative in 12 sub-districts. Method in this stady use performance measuring of productivity, efficiency, growth, liquidity, and solvability of cooperative. Productivity of cooperative in Pelalawan was highly but efficiency still low. Profit and income were highly, even liquidity of cooperative very high, and solvability was good

Search for stop and higgsino production using diphoton Higgs boson decays

Results are presented of a search for a "natural" supersymmetry scenario with gauge mediated symmetry breaking. It is assumed that only the supersymmetric partners of the top-quark (stop) and the Higgs boson (higgsino) are accessible. Events are examined in which there are two photons forming a Higgs boson candidate, and at least two b-quark jets. In 19.7 inverse femtobarns of proton-proton collision data at sqrt(s) = 8 TeV, recorded in the CMS experiment, no evidence of a signal is found and lower limits at the 95% confidence level are set, excluding the stop mass below 360 to 410 GeV, depending on the higgsino mass