Measurement of the charge ratio of atmospheric muons with the CMS detector

This is the pre-print version of this Article. The official published version can be accessed from the link below - Copyright @ 2010 ElsevierWe present a measurement of the ratio of positive to negative muon fluxes from cosmic ray interactions in the atmosphere, using data collected by the CMS detector both at ground level and in the underground experimental cavern at the CERN LHC. Muons were detected in the momentum range from 5 GeV/c to 1 TeV/c. The surface flux ratio is measured to be 1.2766 \pm 0.0032(stat.) \pm 0.0032 (syst.), independent of the muon momentum, below 100 GeV/c. This is the most precise measurement to date. At higher momenta the data are consistent with an increase of the charge ratio, in agreement with cosmic ray shower models and compatible with previous measurements by deep-underground experiments

Observation of a new Xi(b) baryon

The first observation of a new b baryon via its strong decay into Xi(b)^- pi^+ (plus charge conjugates) is reported. The measurement uses a data sample of pp collisions at sqrt(s) = 7 TeV collected by the CMS experiment at the LHC, corresponding to an integrated luminosity of 5.3 inverse femtobarns. The known Xi(b)^- baryon is reconstructed via the decay chain Xi(b)^- to J/psi Xi^- to mu^+ mu^- Lambda^0 pi^-, with Lambda^0 to p pi^-. A peak is observed in the distribution of the difference between the mass of the Xi(b)^- pi^+ system and the sum of the masses of the Xi(b)^- and pi^+, with a significance exceeding five standard deviations. The mass difference of the peak is 14.84 +/- 0.74 (stat.) +/- 0.28 (syst.) MeV. The new state most likely corresponds to the J^P=3/2^+ companion of the Xi(b).Comment: Submitted to Physical Review Letter

Measurements of inclusive W and Z cross sections in pp collisions at root s=7 TeV

This is the pre-print version of the Published Article, which can be accessed from the link below - Copyright @ 2011 Springer VerlagMeasurements of inclusive W and Z boson production cross sections in pp collisions at sqrt(s)=7 TeV are presented, based on 2.9 inverse picobarns of data recorded by the CMS detector at the LHC. The measurements, performed in the electron and muon decay channels, are combined to give sigma(pp to WX) times B(W to muon or electron + neutrino) = 9.95 \pm 0.07(stat.) \pm 0.28(syst.) \pm 1.09(lumi.) nb and sigma(pp to ZX) times B(Z to oppositely charged muon or electron pairs) = 0.931 \pm 0.026(stat.) \pm 0.023(syst.) \pm 0.102(lumi.) nb. Theoretical predictions, calculated at the next-to-next-to-leading order in QCD using recent parton distribution functions, are in agreement with the measured cross sections. Ratios of cross sections, which incur an experimental systematic uncertainty of less than 4%, are also reported

First measurement of hadronic event shapes in pp collisions at √s = 7 TeV

This is the Pre-Print version of the Article - Copyright @ 2011 ElsevierHadronic event shapes have been measured in proton-proton collisions at sqrt(s)=7 TeV, with a data sample collected with the CMS detector at the LHC. The sample corresponds to an integrated luminosity of 3.2 inverse picobarns. Event-shape distributions, corrected for detector response, are compared with five models of QCD multijet production

Search for microscopic black hole signatures at the Large Hadron Collider

This is the Pre-Print version of the Article. The official published paper can be accessed from the link below - Copyright @ 2011 ElsevierA search for microscopic black hole production and decay in pp collisions at a center-of-mass energy of 7 TeV has been conducted by the CMS Collaboration at the LHC, using a data sample corresponding to an integrated luminosity of 35 inverse picobarns. Events with large total transverse energy are analyzed for the presence of multiple high-energy jets, leptons, and photons, typical of a signal expected from a microscopic black hole. Good agreement with the expected standard model backgrounds, dominated by QCD multijet production, is observed for various final-state multiplicities. Limits on the minimum black hole mass are set, in the range 3.5 -- 4.5 TeV, for a variety of parameters in a model with large extra dimensions, along with model-independent limits on new physics in these final states. These are the first direct limits on black hole production at a particle accelerator.This work is supported by the FMSR (Austria); FNRS and FWO (Belgium); CNPq, CAPES, FAPERJ, and FAPESP (Brazil); MES (Bulgaria); CERN; CAS, MoST, and NSFC (China); COLCIENCIAS (Colombia); MSES (Croatia); RPF (Cyprus); Academy of Sciences and NICPB (Estonia); Academy of Finland, ME, and HIP (Finland); CEA and CNRS/IN2P3 (France); BMBF, DFG, and HGF (Germany); GSRT (Greece); OTKA and NKTH (Hungary); DAE and DST (India); IPM (Iran); SFI (Ireland); INFN (Italy); NRF and WCU (Korea); LAS (Lithuania); CINVESTAV, CONACYT, SEP, and UASLP-FAI (Mexico); PAEC (Pakistan); SCSR (Poland); FCT (Portugal); JINR (Armenia, Belarus, Georgia, Ukraine, Uzbekistan); MST and MAE (Russia); MSTD (Serbia); MICINN and CPAN (Spain); Swiss Funding Agencies (Switzerland); NSC (Taipei); TUBITAK and TAEK (Turkey); STFC (United Kingdom); DOE and NSF (USA)

Measurement of dijet angular distributions and search for quark compositeness in pp collisions at √s=7TeV

Dijet angular distributions are measured over a wide range of dijet invariant masses in pp collisions at root s = 7 TeV, at the CERN LHC. The event sample, recorded with the CMS detector, corresponds to an integrated luminosity of 36 pb(-1). The data are found to be in good agreement with the predictions of perturbative QCD, and yield no evidence of quark compositeness. With a modified frequentist approach, a lower limit on the contact interaction scale for left-handed quarks of Lambda(+) = 5.6 TeV (Lambda(-) = 6.7 TeV) for destructive (constructive) interference is obtained at the 95% confidence level

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Metais pesados em solos de área de mineração e metalurgia de chumbo: I - Fitoextração Heavy metals in soils of a lead mining and metallurgy area: I - Phytoextraction

A fitoextração tem sido sugerida como alternativa viável às práticas tradicionais de recuperação de solos contaminados por metais pesados (remoção do solo e destinação em aterros ou coprocessamento em cimento, etc.), em razão dos menores custos e por ser menos impactante ao ambiente. Este trabalho objetivou avaliar a fitoextração induzida (uso de ácido cítrico como agente quelante) de metais pesados, com o cultivo de aveia-preta (Avena strigosa Schreber), girassol (Helianthus annuus L.) e grama-batatais (Paspalum notatum Flügge), em solos poluídos (solos 2, 3 e 4) de uma área de mineração de Pb em Adrianópolis (PR). O solo 1 foi amostrado em área de mata nativa (referência). O experimento foi realizado em casa de vegetação, com três repetições. Foram determinados os teores de Pb, Cd, Cu, Ni, Cr e Zn no solo com HNO3/HCl (3:1) concentrados. Após a colheita das plantas, determinaram-se a massa de matéria seca e os teores de metais pesados nas raízes e parte aérea (digestão nítrico-perclórica). Os solos contaminados (2, 3 e 4) apresentaram as seguintes faixas de teores de metais pesados (mg kg-1): Pb - 2.598,5 a 9.678,2; Cd - 1,9 a 22,2; Cu - 165,5 a 969,2; Ni - 22,6 a 38,4; Cr - 15,2 a 27,8; e Zn - 87,4 a 894,8. A adição de quelante não induziu a uma absorção mais efetiva de metais pesados pelas plantas. O solo 2 possibilitou melhor crescimento das plantas, e o girassol deve ser preferido na fitorremediação das áreas sob as mesmas condições. Na área próxima à planta fabril (solo 3) e nas áreas com grande ocorrência de rejeitos (solo 4), a fitoextração não foi eficiente. Nesses ambientes, recomenda-se o estudo de outras plantas nativas e, ou, exóticas resistentes a altos teores de Pb (solo 3) ou a remobilização de solo mais rejeito para aterros industriais (solo 4).<br>Phytoextraction has been suggested as a viable alternative to traditional restoration practices for heavy metal-contaminated soils (e.g., soil removal and disposal in land fill areas, or co-processing in cement), in view of the lower costs and lower environmental impact. This study had the objective of evaluating induced phytoextraction (use of chelating agent) of heavy metals in black oat (Avena strigosa Schreber), sunflower (Helianthus annuus L.) and Bahiagrass (Paspalum notatum Flügge) in polluted soils (soils 2, 3, and 4) of a Pb mining and processing area in Adrianópolis (PR), Brazil. The experiment was conducted in a greenhouse, with three replications. The soil Pb and Zn contents were determined using concentrated HNO3/HCl (3:1). After harvest, the dry biomass and heavy metal contents in the root and shoot parts were determined by nitro-perchloric digestion. The following values of heavy metal content were found in the contaminated soils (2, 3 and 4) (mg kg-1): Pb - 2,598.5 to 9,678.2; Cd - 1.9 to 22.2; Cu - 165.5 to 969.2; Ni - 22.6 to 38.4; Cr - 15.2 to 27.8 and Zn - 87.4 to 894.8. Chelate addition did not induce heavy metal uptake by the plants. Plant development in soil 2 was better and sunflower should be preferred for phytoremediation in areas under similar conditions. In the area surrounding the industrial plant (soil 3) and in the areas with high waste disposal (soil 4), phytoextraction was not efficient. In these environments other native plants and/or exotic Pb-resistant plants should be tested (soil 3) as well as the remobilization of soil with residues to industrial landfills