COMPLEXATION OF LISINOPRIL DRUG WITH ALKALINE EARTH AND TRANSITION METAL IONS IN MIXED SOLVENT MEDIA

Objective: To investigate the stability constant of Lisinopril hydrochloride drug with alkaline earth metal ions Mg(II), Ca(II) and transition metal ions Fe(III), Cu(II) using potentiometric titration technique in 20%(v/v) ethanol-water mixture at 27 °C temperature and at an ionic strength of 0.1M NaClO4. Materials and Methods: The ligand Lisinopril hydrochloride is soluble in 20% (v/v) ethanol-water mixture. NaOH, NaClO4, HClO4 and metal salts were of AR grade. The solutions used in the pH metric titration were prepared in double distilled water. All the measurements were made at 27 0Cin 20%(V/V) ethanol-water mixture at constant ionic strength of 0.1M NaClO4. The pH measurement were made using a digital pH meter. Results: The method of Calvin and Bjerrum as adopted by Irving and Rossotti has been employed to determine proton ligand (pKa) and metal-ligand stability constant (logK) values. It is observed that alkaline earth metal & transition metal ion forms 1:1 and 1:2 complexes. The order of stability constants for these metal complexes was as: Fe3+ > Cu2+ > Mg2+ > Ca2+ Conclusion: The stability constants of trivalent Fe show maximum stability whereas divalent Ca shows minimum stability

Withdrawal from treatment as an outcome in the Isolde study of COPD

Objectives: To investigate the determinants of patient withdrawal from our study, and the effect of these withdrawals on the outcome of treatment with inhaled corticosteroids in patients with COPD. Design: A double-blind, placebo-controlled, randomized trial. Setting: Eighteen outpatient centers in the United Kingdom. Participants: Seven hundred fifty-one patients with stable COPD defined clinically as baseline postbronchodilator FEV1 > 0.8 L and < 85% predicted, FEV1/FVC ratio < 70%, and FEV1 change after albuterol < 10% of predicted. Intervention: Random assignment of either 500 micrograms bid of inhaled fluticasone propionate (FP)using a spacer device or an identical placebo inhaler. Treatment was continued for 3 years or until patients withdrew from follow-up. Measurements and results: Postbronchodilator FEV1 was measured on three occasions before randomization and every 3 months thereafter. Health status was assessed by the disease-specific St. George Respiratory Questionnaire (SGRQ) and the modified short-form 36 questionnaire (SF-36) at baseline and every 6 months. Three hundred thirty-nine patients withdrew, of whom 156 patients received FP. Prescription of frequent courses of oral prednisolone was the most common reason for withdrawing as specified in the protocol (69 patients in the FP group withdrew due to respiratory symptoms, compared with 93 patients in the placebo group). This explained the significantly greater dropout of placebo-treated patients that was most evident when FEV1 was < 50% predicted. Patients withdrawing had a significantly more rapid decline in health status, measured by both the SGRQ and the SF-36 (p < 0.001). Those withdrawing from the placebo group had a more rapid decline in FEV1 and more exacerbations than the FP-treated groups. Baseline FEV1 was lower in dropouts than in patients completing the study receiving placebo, but there was no difference between the respective groups receiving FP. Conclusions: Patients who withdrew from follow-up were those with the most rapidly deteriorating health status and lung function. Losing these patients from the final analysis can reduce the power of a study to achieve its primary end point

An intact light harvesting complex I antenna system is required for complete state transitions in Arabidopsis

M.P.J. acknowledges funding fromthe Leverhulme Trust (U.K.) and the Krebs Institute and 69 Project Sunshine at the University of Sheffield. A.V.R. gratefully acknowledges funding 70 fromthe Biotechnology and Biological Sciences Research Council (U.K.), Leverhulme Trust 71 and The Royal Society Wolfson Research Merit Award. C.N.H. and M.P.J. acknowledge 72 research grant BB/M000265/1 from the Biotechnology and Biological Sciences Research 73 Council (UK). C.N.H. was also supported by an Advanced Award 338895 from the 74 European Research Council. This work was also supported as part of the Photosynthetic 75 Antenna Research Center (PARC), an Energy Frontier Research Center funded by the US 76 Department of Energy, Office of Science, and Office of Basic Energy Sciences under Award 77 Number DE-SC0001035. PARC’s role was to provide partial support for C.N.H

Neutron cross-sections for advanced nuclear systems : The n-TOF project at CERN

© Owned by the authors, published by EDP Sciences, 2014 This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly citedThe study of neutron-induced reactions is of high relevance in a wide variety of fields, ranging from stellar nucleosynthesis and fundamental nuclear physics to applications of nuclear technology. In nuclear energy, high accuracy neutron data are needed for the development of Generation IV fast reactors and accelerator driven systems, these last aimed specifically at nuclear waste incineration, as well as for research on innovative fuel cycles. In this context, a high luminosity Neutron Time Of Flight facility, n-TOF, is operating at CERN since more than a decade, with the aim of providing new, high accuracy and high resolution neutron cross-sections. Thanks to the features of the neutron beam, a rich experimental program relevant to nuclear technology has been carried out so far. The program will be further expanded in the near future, thanks in particular to a new high-flux experimental area, now under construction.Peer reviewedFinal Published versio

238U(n, γ) reaction cross section measurement with C 6D6 detectors at the n-TOF CERN facility

This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly citedThe radiative capture cross section of 238U is very important for the developing of new reactor technologies and the safety of existing ones. Here the preliminary results of the 238U(n,γ) cross section measurement performed at n-TOF with C6D6 scintillation detectors are presented, paying particular attention to data reduction and background subtraction.Peer reviewe

High accuracy 234U(n,f) cross section in the resonance energy region

New results are presented of the 234U neutron-induced fission cross section, obtained with high accuracy in the resonance region by means of two methods using the 235U(n,f) as reference. The recent evaluation of the 235U(n,f) obtained with SAMMY by L. C. Leal et al. (these Proceedings), based on previous n-TOF data [1], has been used to calculate the 234U(n,f) cross section through the 234U/235U ratio, being here compared with the results obtained by using the n-TOF neutron flux

The nucleosynthesis of heavy elements in Stars : The key isotope 25Mg

This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly citedWe have measured the radiative neutron-capture cross section and the total neutron-induced cross section of one of the most important isotopes for the s process, the 25Mg. The measurements have been carried out at the neutron time-of-flight facilities n-TOF at CERN (Switzerland) and GELINA installed at the EC-JRC-IRMM (Belgium). The cross sections as a function of neutron energy have been measured up to approximately 300 keV, covering the energy region of interest to the s process. The data analysis is ongoing and preliminary results show the potential relevance for the s process.Peer reviewe

Monitoring mosaic biotopes in a marine conservation zone by autonomous underwater vehicle

The number of marine protected areas (MPAs) has increased dramatically in the last decade and poses a major logistic challenge for conservation practitioners in terms of spatial extent and the multiplicity of habitats and biotopes that now require assessment. Photographic assessment by autonomous underwater vehicle (AUV) enables the consistent description of multiple habitats, in our case including mosaics of rock and sediment. As a case study, we used this method to survey the Greater Haig Fras marine conservation zone (Celtic Sea, northeast Atlantic). We distinguished 7 biotopes, detected statistically significant variations in standing stocks, species density, species diversity, and faunal composition, and identified significant indicator species for each habitat. Our results demonstrate that AUV‐based photography can produce robust data for ecological research and practical marine conservation. Standardizing to a minimum number of individuals per sampling unit, rather than to a fixed seafloor area, may be a valuable means of defining an ecologically appropriate sampling unit. Although composite sampling represents a change in standard practice, other users should consider the potential benefits of this approach in conservation studies. It is broadly applicable in the marine environment and has been successfully implemented in deep‐sea conservation and environmental impact studies. Without a cost‐effective method, applicable across habitats, it will be difficult to further a coherent classification of biotopes or to routinely assess their conservation status in the rapidly expanding global extent of MPAs

Towards the high-accuracy determination of the 238U fission cross section at the threshold region at CERN - N-TOF

The 238U fission cross section is an international standard beyond 2 MeV where the fission plateau starts. However, due to its importance in fission reactors, this cross-section should be very accurately known also in the threshold region below 2 MeV. The 238U fission cross section has been measured relative to the 235U fission cross section at CERN - n-TOF with different detection systems. These datasets have been collected and suitably combined to increase the counting statistics in the threshold region from about 300 keV up to 3 MeV. The results are compared with other experimental data, evaluated libraries, and the IAEA standards

Detector Description and Performance for the First Coincidence Observations between LIGO and GEO

For 17 days in August and September 2002, the LIGO and GEO interferometer gravitational wave detectors were operated in coincidence to produce their first data for scientific analysis. Although the detectors were still far from their design sensitivity levels, the data can be used to place better upper limits on the flux of gravitational waves incident on the earth than previous direct measurements. This paper describes the instruments and the data in some detail, as a companion to analysis papers based on the first data.Comment: 41 pages, 9 figures 17 Sept 03: author list amended, minor editorial change