Magnetic, electrical, and GPR waterborne surveys of moraine deposits beneath a lake: A case history from Turin, Italy

Bathymetry and bottom sediment types of inland water basins provide meaningful information to estimate water reserves and possible connections between surface and groundwater. Waterborne geophysical surveys can be used to obtain several independent physical parameters to study the sediments. We explored the possibilities of retrieving information on both shallow and deep geological structures beneath a morainic lake by means of waterborne nonseismic methods. In this respect, we discuss simultaneous magnetic, electrical, and groundpenetrating radar (GPR) waterborne surveys on the Candia morainic lake in northerly Turin (Italy).We used waterborne GPR to obtain information on the bottom sediment and the bathymetry needed to constrain the magnetic and electrical inversions. We obtained a map of the total magnetic field (TMF) over the lake from which we computed a 2D constrained compact magnetic inversion for selected profiles, along with a laterally constrained inversion for one electrical profile. The magnetic survey detected some deep anomalous bodies within the subbottom moraine. The electrical profiles gave information on the more superficial layer of bottom sediments. We identify where the coarse morainic material outcrops from the bottom finer sediments from a correspondence between high GPR reflectivity, resistivity, and magnetic anomalie

Syntectonic mobility of supergene nickel ores of New Caledonia (Southwest Pacific). Evidence from faulted regolith and garnierite veins.

International audienceSupergene nickel deposits of New Caledonia that have been formed in the Neogene by weathering of obducted ultramafic rocks are tightly controlled by fracture development. The relationship of tropical weathering and tectonic structures, faults and tension gashes, have been investigated in order to determine whether fractures have play a passive role only, as previously thought; or alternatively, if brittle tectonics was acting together with alteration. From the observation of time-relationship, textures, and mineralogy of various fracture fills and fault gouges, it may be unambiguously established that active faulting has play a prominent role not only in facilitating drainage and providing room for synkinematic crystallisation of supergene nickel silicate, but also in mobilising already formed sparse nickel ore, giving birth to the very high grade ore nicknamed "green gold"

Upper- and mid-mantle interaction between the Samoan plume and the Tonga-Kermadec slabs

Mantle plumes are thought to play a key role in transferring heat from the core\u2013mantle boundary to the lithosphere, where it can significantly influence plate tectonics. On impinging on the lithosphere at spreading ridges or in intra-plate settings, mantle plumes may generate hotspots, large igneous provinces and hence considerable dynamic topography. However, the active role of mantle plumes on subducting slabs remains poorly understood. Here we show that the stagnation at 660 km and fastest trench retreat of the Tonga slab in Southwestern Pacific are consistent with an interaction with the Samoan plume and the Hikurangi plateau. Our findings are based on comparisons between 3D anisotropic tomography images and 3D petrological-thermo-mechanical models, which self-consistently explain several unique features of the Fiji\u2013Tonga region. We identify four possible slip systems of bridgmanite in the lower mantle that reconcile the observed seismic anisotropy beneath the Tonga slab (VSH4VSV) with thermo-mechanical calculations

Comparison of Marine Spatial Planning Methods in Madagascar Demonstrates Value of Alternative Approaches

The Government of Madagascar plans to increase marine protected area coverage by over one million hectares. To assist this process, we compare four methods for marine spatial planning of Madagascar's west coast. Input data for each method was drawn from the same variables: fishing pressure, exposure to climate change, and biodiversity (habitats, species distributions, biological richness, and biodiversity value). The first method compares visual color classifications of primary variables, the second uses binary combinations of these variables to produce a categorical classification of management actions, the third is a target-based optimization using Marxan, and the fourth is conservation ranking with Zonation. We present results from each method, and compare the latter three approaches for spatial coverage, biodiversity representation, fishing cost and persistence probability. All results included large areas in the north, central, and southern parts of western Madagascar. Achieving 30% representation targets with Marxan required twice the fish catch loss than the categorical method. The categorical classification and Zonation do not consider targets for conservation features. However, when we reduced Marxan targets to 16.3%, matching the representation level of the “strict protection” class of the categorical result, the methods show similar catch losses. The management category portfolio has complete coverage, and presents several management recommendations including strict protection. Zonation produces rapid conservation rankings across large, diverse datasets. Marxan is useful for identifying strict protected areas that meet representation targets, and minimize exposure probabilities for conservation features at low economic cost. We show that methods based on Zonation and a simple combination of variables can produce results comparable to Marxan for species representation and catch losses, demonstrating the value of comparing alternative approaches during initial stages of the planning process. Choosing an appropriate approach ultimately depends on scientific and political factors including representation targets, likelihood of adoption, and persistence goals

Fault rotation and core complex formation : significant processes in seafloor formation at slow-spreading mid-ocean ridges (Mid-Atlantic Ridge, 13°–15°N)

Author Posting. © American Geophysical Union, 2008. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry Geophysics Geosystems 9 (2008): Q03003, doi:10.1029/2007GC001699.The region of the Mid-Atlantic Ridge (MAR) between the Fifteen-Twenty and Marathon fracture zones displays the topographic characteristics of prevalent and vigorous tectonic extension. Normal faults show large amounts of rotation, dome-shaped corrugated detachment surfaces (core complexes) intersect the seafloor at the edge of the inner valley floor, and extinct core complexes cover the seafloor off-axis. We have identified 45 potential core complexes in this region whose locations are scattered everywhere along two segments (13° and 15°N segments). Steep outward-facing slopes suggest that the footwalls of many of the normal faults in these two segments have rotated by more than 30°. The rotation occurs very close to the ridge axis (as much as 20° within 5 km of the volcanic axis) and is complete by ∼1 My, producing distinctive linear ridges with roughly symmetrical slopes. This morphology is very different from linear abyssal hill faults formed at the 14°N magmatic segment, which display a smaller amount of rotation (typically <15°). We suggest that the severe rotation of faults is diagnostic of a region undergoing large amounts of tectonic extension on single faults. If faults are long-lived, a dome-shaped corrugated surface develops in front of the ridges and lower crustal and upper mantle rocks are exposed to form a core complex. A single ridge segment can have several active core complexes, some less than 25 km apart that are separated by swales. We present two models for multiple core complex formation: a continuous model in which a single detachment surface extends along axis to include all of the core complexes and swales, and a discontinuous model in which local detachment faults form the core complexes and magmatic spreading forms the intervening swales. Either model can explain the observed morphology.D. Smith and H. Schouten were supported in this work by NSF grant OCE-0649566. J. Escartın was supported by CNRS

Geometry of extensional faults developed at slow-spreading centres from seismic reflection data in the Central Atlantic (Canary Basin)

We present depth images, from portions of profiles that are close to flow-lines, of Cretaceous oceanic crust in the eastern Central Atlantic. Compared with post-stack time migrations, the images illustrate the improvement resulting from the application of pre-stack depth migration. The images document the scale and geometry of normal faulting in oceanic crust formed over 25 Myr at a half-spreading rate of less than 10 mm yr−1, and the variation in extensional style with position within the spreading segment. Away from major fault zones (FZs), most faults are subplanar, dip more than 35°, are associated with moderate basement relief (0.2–1 km relief) and may penetrate to deep crustal levels. These faults could be related to the lifting of the lithosphere out of the median valley to the flanking mountains. Also observed away from FZs are gently dipping to subhorizontal reflections in the upper crust, which resemble detachment faults. In contrast, the inside corner crust is more rugged, with basement highs rising up to 2 km above the intervening basins. This larger-scale topography is associated with a different style of faulting: the depth images reveal gently dipping (<35°) faults that are rooted in the deep crust and that project to the ridgeward flank of the dome-shaped large basement highs (1–2 km vertical relief). The faults seem to continue as the ridge-facing flank of these highs and some may extend over the crest of the high to breakaways beyond. In this case, the domal highs that form the exhumed footwall to the faults can be described as oceanic core complexes. These controlling faults are up to 20 km long and have a heave of ∼10 km, sufficient to have accommodated up to 50 per cent extension and to have exhumed deep crustal and perhaps even mantle rocks. We suggest that similar faults can explain the structure and lithologies found at megamullion structures (oceanic core complexes) at inside corners near the present-day spreading ridge

Geochronology and geochemistry of the northern Scotia Sea: a revised interpretation of the North and West Scotia ridge junction

Understanding the tectonic evolution of the Scotia Sea is critical to interpreting how ocean gateways developed during the Cenozoic and their influence on ocean circulation patterns and water exchange between the Atlantic and Southern oceans. We examine the geochronology and detrital age history of lithologies from the prominent, submerged Barker Plateau of the North Scotia Ridge. Metasedimentary rocks of the North Scotia Ridge share a strong geological affinity with the Fuegian Andes and South Georgia, indicating a common geological history and no direct affinity to the Antarctic Peninsula. The detrital zircon geochronology indicates that deposition was likely to have taken place during the mid – Late Cretaceous. A tonalite intrusion from the Barker Plateau has been dated at 49.6 ±0.3Ma and indicates that magmatism of the Patagonian–Fuegian batholith continued into the Eocene. This was coincident with the very early stages of Drake Passage opening, the expansion of the proto Scotia Sea and reorganization of the Fuegian Andes. The West Scotia Ridge is an extinct spreading centerthat shaped the Scotia Sea and consists of seven spreading segments separated by prominent transform faults. Spreading was active from 30–6Ma and ceased with activity on the W7 segment at the junction with the North Scotia Ridge. Reinterpretation of the gravity and magnetic anomalies indicate that the architecture of the W7 spreading segment is distinct to the other segments of the West Scotia Ridge. Basaltic lava samples from the eastern flank of the W7 segment have been dated as Early – mid Cretaceous in age (137–93Ma) and have a prominent arc geochemical signature indicating that seafloor spreading did not occur on the W7 segment. Instead the W7 segment is likely to represent a downfaulted block of the North Scotia Ridge of the Fuegian Andes continental margin arc, or is potentially related to the putative Cretaceous Central Scotia Sea