Implementation of Work Sharing Technique to Improve Line Efficiency in Sewing Section: A Case Study

This paper focuses on analyzing the garment processes and operation bulletin for a particular sewing line in Mahadi Fashion (PVT) Limited. The production rate of the existing layout was not close to the target. The target was 175 pieces per hour but actual production was 138 pieces per hour. So we analyzed the layout and found out the bottleneck area. Then we rearranged the workload by work sharing and reduced manpower. By doing so, actual production was 160 pieces per hour, which is near to the target, and line efficiency increased to 77%, where the existing sewing line layout was 55%. After reducing the bottleneck in sewing line capacity, we achieved 160 pieces per hour against the 138 pieces in the existing layout

Access to mass media and awareness of sexually transmitted diseases (STDs) among the truck drivers in Dhaka City : do mass media make them aware?

The major objective of the study is to determine the association between access to mass media such as television, newspaper, radio and internet and level of STDs awareness among the truck drivers in Dhaka city. This research utilized purposive sampling technique to select 250 respondents from the study areas. The results of the study demonstrate that a significant number of respondents (88%) had heard of STDs. However, most of them (70%) did not have the awareness of STDs. It again reveals that radio, newspaper and internet did not play significant role in making them aware of STDs. Bivariate results of the study indicate that respondents with higher degree of exposure to television were more likely to be aware of STD like HIV. This study concludes that mass media may play vibrant role in disseminating information about not only HIV but also other STDs such as Chlamydia, Herpes, Hepatitis B and Human Papilloma Virus (HPV)

Potencies of Justicia adhatoda L. for its possible phytotoxic activity

The phytotoxic effects of Justicia adhatoda L. were investigated on cauliflower, broccoli, tomato, foxtail millet and barnyard grass. The experiments were carried out under laboratory and in pot experiments. Six different aqueous methanol extract concentrations (control, 0.001, 0.003, 0.01, 0.03 and 0.1 g DW equivalent mL-1 extract) were tested in the laboratory and six aqueous extract concentrations (control, 1.0, 2.0, 3.0, 4.0 and 5.0 g DW mL-1 extract equivalent) were evaluated in the pot experiment. Results showed a reduction in germination and growth (shoot length, root length and biomass weight) at higher extract concentration compared to control. The leaf extracts from J. adhatoda showed that the foxtail millet and barnyard grass are germinating below 50 % both in the laboratory condition and in the pot experiment at their maximum concentration. When maximum extracts have been applied, we have found less than 0.5 cm of shoot and root of foxtail millet and barnyard grass. Maximum dry weight reduction was observed in foxtail millet and barnyard grass at the same concentration. The findings show that J. adhatoda may have phytotoxic potential and thus contains phytotoxins. Therefore, J. adhatoda can be used in sustainable crop production as a mulch or soil additive to suppress weeds

The effect of surface treatments and graphene-based modifications on mechanical properties of natural jute fiber composites: A review

Natural fiber reinforced composites (FRC) are of great interests, because of their biodegradability, recyclability, and environmental benefits over synthetic FRC. Natural jute FRC could provide an environmentally sustainable, light weight, and cost-effective alternative to synthetic FRC. However, the application of natural jute FRC is limited because of their poor mechanical and interfacial properties. Graphene and its derivatives could potentially be applied to modify jute fiber surface for manufacturing natural FRC with excellent mechanical properties, and lower environmental impacts. Here, we review the physical and chemical treatments, and graphene-based modifications of jute fibers, and their effect on mechanical properties of jute FRC. We introduce jute fiber structure, chemical compositions, and their potential applications first. We then provide an overview of various surface treatments used to improve mechanical properties of jute FRC. We discuss and compare various graphene derivative-based surface modifications of jute fibers, and their impact on the performance of FRC. Finally, we provide our future perspective on graphene-based jute fibers research to enable next generation strong and sustainable FRC for high performance engineering applications without conferring environmental problems

Impact of bleaching actions of bleaching powder and hydrogen peroxide on biopolished denim garments

U radu je ispitan utjecaj pranja s izbjeljivanjem s dva različita sredstva za bijeljenje: praškom za bijeljenje i vodikovim peroksidom na prethodno biopoliranu pamučnu denim tkaninu bojadisanu s indigo bojilom. Odjevni proizvodi od pamučne denim tkanine obojadisani indigo bojilom su prani uz dodatak enzima radi otklanjanja dlakavosti površine, odnosno biopolirani. Nakon toga je jedan dio obrađivan s praškastim sredstvom za bijeljenje u koncentraciji od 2,5 g/L u vremenima od 3 i 5 min na 50 óC, a drugi dio s vodikovim peroksidom u koncentraciji 2,5 g/L u vremenima od 5 i 10 min. Nakon obrada na uzorcima su provedena ispitivanja vlačne čvrstoće, čvrstoće u šavu, površinske mase, postojanosti obojenja na vodu, na kiselinu, lužinu, pranje i habanje. Pranje odjevnih predmeta s izbjeljivanjem provedeno primjenom dvaju sredstva za bijeljenje imalo je velik utjecaj na njihova fizikalna svojstva i postojanosti obojenja u odnosu na neobrađene predmete.This study shows the impact of bio polishing and bleach wash of two different bleaching agent one is bleaching powder and another is hydrogen peroxide on 100 % cotton denim dyed with indigo dye. Garments were washed with enzyme to remove hairiness . biopolished. Then garments were subjected to a bleach concentration with bleaching powder of 2.5 g/L for 3 and 5 minutes at 50 oC temperature and other were bleached with hydrogen peroxide of 2.5 g/L for 5 and 10 minutes. The physical and colour fastness properties were analyzed in before and after washing. The properties that were analyzed include tensile strength, seam strength, fabric weight, and colour fastness to water, acid, alkali, washing and rubbing. Bleach washed garments by two different bleaching agent exhibit a great influence on the physical and colour fastness properties than the unwashed garments

Impact of bleaching actions of bleaching powder and hydrogen peroxide on biopolished denim garments

U radu je ispitan utjecaj pranja s izbjeljivanjem s dva različita sredstva za bijeljenje: praškom za bijeljenje i vodikovim peroksidom na prethodno biopoliranu pamučnu denim tkaninu bojadisanu s indigo bojilom. Odjevni proizvodi od pamučne denim tkanine obojadisani indigo bojilom su prani uz dodatak enzima radi otklanjanja dlakavosti površine, odnosno biopolirani. Nakon toga je jedan dio obrađivan s praškastim sredstvom za bijeljenje u koncentraciji od 2,5 g/L u vremenima od 3 i 5 min na 50 óC, a drugi dio s vodikovim peroksidom u koncentraciji 2,5 g/L u vremenima od 5 i 10 min. Nakon obrada na uzorcima su provedena ispitivanja vlačne čvrstoće, čvrstoće u šavu, površinske mase, postojanosti obojenja na vodu, na kiselinu, lužinu, pranje i habanje. Pranje odjevnih predmeta s izbjeljivanjem provedeno primjenom dvaju sredstva za bijeljenje imalo je velik utjecaj na njihova fizikalna svojstva i postojanosti obojenja u odnosu na neobrađene predmete.This study shows the impact of bio polishing and bleach wash of two different bleaching agent one is bleaching powder and another is hydrogen peroxide on 100 % cotton denim dyed with indigo dye. Garments were washed with enzyme to remove hairiness . biopolished. Then garments were subjected to a bleach concentration with bleaching powder of 2.5 g/L for 3 and 5 minutes at 50 oC temperature and other were bleached with hydrogen peroxide of 2.5 g/L for 5 and 10 minutes. The physical and colour fastness properties were analyzed in before and after washing. The properties that were analyzed include tensile strength, seam strength, fabric weight, and colour fastness to water, acid, alkali, washing and rubbing. Bleach washed garments by two different bleaching agent exhibit a great influence on the physical and colour fastness properties than the unwashed garments

Smart and multifunctional fiber‐reinforced composites of 2D heterostructure‐based textiles

Smart and multifunctional fiber reinforced polymer (FRP) composites with energy storage, sensing, and heating capabilities have gained significant interest for automotive, civil, and aerospace applications. However, achieving smart and multifunctional capabilities in an FRP composite while maintaining desired mechanical properties remains challenging. Here, a novel approach for layer‐by‐layer (LBL) deposition of 2D material (graphene and molybdenum disulfide, MoS2)‐based heterostructure onto glass fiber fabric using a highly scalable manufacturing technique at a remarkable speed of ≈150 m min−1 is reported. This process enables the creation of smart textiles with integrated energy storage, sensing, and heating functionalities. This methodology combines gel‐based electrolyte with a vacuum resin infusion technique, resulting in an efficient and stable smart FRP composite with an areal capacitance of up to ≈182 µF cm−2 at 10 mV s−1. The composite exhibits exceptional cyclic stability, maintaining ≈90% capacitance after 1000 cycles. Moreover, the smart composite demonstrates joule heating, reaching from ∼24 to ∼27 °C within 120 s at 25 V.. Additionally, the smart composite displays strain sensitivity by altering electrical resistance with longitudinal strain, enabling structural health monitoring. These findings highlight the potential of smart composites for multifunctional applications and provide an important step toward realizing their actual real‐world applications

Mortality and pulmonary complications in patients undergoing surgery with perioperative SARS-CoV-2 infection: an international cohort study

Background: The impact of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) on postoperative recovery needs to be understood to inform clinical decision making during and after the COVID-19 pandemic. This study reports 30-day mortality and pulmonary complication rates in patients with perioperative SARS-CoV-2 infection. Methods: This international, multicentre, cohort study at 235 hospitals in 24 countries included all patients undergoing surgery who had SARS-CoV-2 infection confirmed within 7 days before or 30 days after surgery. The primary outcome measure was 30-day postoperative mortality and was assessed in all enrolled patients. The main secondary outcome measure was pulmonary complications, defined as pneumonia, acute respiratory distress syndrome, or unexpected postoperative ventilation. Findings: This analysis includes 1128 patients who had surgery between Jan 1 and March 31, 2020, of whom 835 (74·0%) had emergency surgery and 280 (24·8%) had elective surgery. SARS-CoV-2 infection was confirmed preoperatively in 294 (26·1%) patients. 30-day mortality was 23·8% (268 of 1128). Pulmonary complications occurred in 577 (51·2%) of 1128 patients; 30-day mortality in these patients was 38·0% (219 of 577), accounting for 81·7% (219 of 268) of all deaths. In adjusted analyses, 30-day mortality was associated with male sex (odds ratio 1·75 [95% CI 1·28–2·40], p\textless0·0001), age 70 years or older versus younger than 70 years (2·30 [1·65–3·22], p\textless0·0001), American Society of Anesthesiologists grades 3–5 versus grades 1–2 (2·35 [1·57–3·53], p\textless0·0001), malignant versus benign or obstetric diagnosis (1·55 [1·01–2·39], p=0·046), emergency versus elective surgery (1·67 [1·06–2·63], p=0·026), and major versus minor surgery (1·52 [1·01–2·31], p=0·047). Interpretation: Postoperative pulmonary complications occur in half of patients with perioperative SARS-CoV-2 infection and are associated with high mortality. Thresholds for surgery during the COVID-19 pandemic should be higher than during normal practice, particularly in men aged 70 years and older. Consideration should be given for postponing non-urgent procedures and promoting non-operative treatment to delay or avoid the need for surgery. Funding: National Institute for Health Research (NIHR), Association of Coloproctology of Great Britain and Ireland, Bowel and Cancer Research, Bowel Disease Research Foundation, Association of Upper Gastrointestinal Surgeons, British Association of Surgical Oncology, British Gynaecological Cancer Society, European Society of Coloproctology, NIHR Academy, Sarcoma UK, Vascular Society for Great Britain and Ireland, and Yorkshire Cancer Research

Early mobilisation in critically ill COVID-19 patients: a subanalysis of the ESICM-initiated UNITE-COVID observational study

Background Early mobilisation (EM) is an intervention that may improve the outcome of critically ill patients. There is limited data on EM in COVID-19 patients and its use during the first pandemic wave. Methods This is a pre-planned subanalysis of the ESICM UNITE-COVID, an international multicenter observational study involving critically ill COVID-19 patients in the ICU between February 15th and May 15th, 2020. We analysed variables associated with the initiation of EM (within 72 h of ICU admission) and explored the impact of EM on mortality, ICU and hospital length of stay, as well as discharge location. Statistical analyses were done using (generalised) linear mixed-effect models and ANOVAs. Results Mobilisation data from 4190 patients from 280 ICUs in 45 countries were analysed. 1114 (26.6%) of these patients received mobilisation within 72 h after ICU admission; 3076 (73.4%) did not. In our analysis of factors associated with EM, mechanical ventilation at admission (OR 0.29; 95% CI 0.25, 0.35; p = 0.001), higher age (OR 0.99; 95% CI 0.98, 1.00; p ≤ 0.001), pre-existing asthma (OR 0.84; 95% CI 0.73, 0.98; p = 0.028), and pre-existing kidney disease (OR 0.84; 95% CI 0.71, 0.99; p = 0.036) were negatively associated with the initiation of EM. EM was associated with a higher chance of being discharged home (OR 1.31; 95% CI 1.08, 1.58; p = 0.007) but was not associated with length of stay in ICU (adj. difference 0.91 days; 95% CI − 0.47, 1.37, p = 0.34) and hospital (adj. difference 1.4 days; 95% CI − 0.62, 2.35, p = 0.24) or mortality (OR 0.88; 95% CI 0.7, 1.09, p = 0.24) when adjusted for covariates. Conclusions Our findings demonstrate that a quarter of COVID-19 patients received EM. There was no association found between EM in COVID-19 patients' ICU and hospital length of stay or mortality. However, EM in COVID-19 patients was associated with increased odds of being discharged home rather than to a care facility. Trial registration ClinicalTrials.gov: NCT04836065 (retrospectively registered April 8th 2021)

Pogaństwo w Polsce na przestrzeni lat: stare dobre czasy czy uśpione narzucenie kultury?

Od czasu wprowadzenia do chrześcijaństwa i chrztu w 966 r. przez Mieszka II Polska cieszy się słabą opinią jednego z najbardziej religijnych i katolickich krajów w całej Europie Środkowej. Ale co z dominującym kulturowym i tradycyjnym tłem tego kraju, które przetrwało przez słowiańskie pogaństwo na lata przed chrystianizacją? Teza ta wpisuje się zarówno w historyczne, jak i współczesne stanowiska kulturowe Polski, które wywodzą się z dawnych tradycji pogańskich, ale bywają wszechobecne w dzisiejszej kulturze polskiej w sposób subtelny, ale nieunikniony. Artykuł analizuje powtarzające się w historii Polski schematy, w których zjawiska kulturowe starannie ukształtowały się w dualizmie między surowym katolicyzmem a starożytnym pogaństwem. Efektem tej pracy jest ukazanie, jak kultura polska rozwinęła się jako wyraz tożsamości narodowej, zachowując i szanując fundament religijny, który nie jest zgodny z pochodzeniem samej kultury. Uznano za konieczne wykonanie tej pracy badawczej, ponieważ jest zaskakująco mniej opublikowanych prac na ten właśnie temat, zwłaszcza w języku angielskim. Do tej pracy wykorzystano źródła w kilku formach, w tym pierwotne, wtórne i cyfrowe. W pracy znalazły się również wywiady przeprowadzone od ludzi na potrzeby tych badań, co pomogło ukształtować wynik na coś mniej abstrakcyjnego i bardziej praktycznego. Implikacja tej tezy ilustruje wrażliwość współistnienia Kościoła i kultury w Polsce, jednocześnie udowadniając, jak pogaństwo zyskuje na popularności w polskiej kulturze, popkulturze, młodości i dobrze zachowanych tradycjach.Ever since the introduction to Christianity and Baptism in 966 AD by Mieszko II, Poland has maintained a subpar reputation at being one of the most religious and Catholic countries in all Central Europe. But what about the predominant cultural and traditional background of this country that persisted through Slavic Paganism years before the Christianization took place? This thesis undergoes both the historical and contemporary cultural standpoints of Poland which date back to the olden days of Pagan traditions while tending to be omnipresent in today's Polish culture in a subtle yet unavoidable stance. The paper analyzes recurring patterns in Polish history through which the cultural phenomena carefully crafted itself in a duality between stern Catholicism and ancient Paganism. The outcome of this work is to portray how Polish culture developed itself into being an expression of national identity while maintaining and honoring a religious foundation that does not look eye to eye with the origin of the culture itself. It deemed necessary to do this research work as there are surprisingly less amount of published works on this very topic, especially in English. Sources in several forms have been used for this work including primary, secondary, and digital. Interviews taken from people for the sake of this research have also been included in the thesis, which helped shape the result into something less abstract and more practical. The implication of this thesis illustrates the sensitivity of the co-existence between church and culture in Poland, while proving how Paganism is gaining conspicuous popularity in Polish culture, pop-culture, youth, and well-preserved traditions