A review of factors which influence pedestrian use of the streets: Task 1 report for an EPSRC funded project on measuring pedestrian accessibility

INTRODUCTION This document was written to report the results from Task 1 of the Measuring Pedestrian Accessibility project funded through the EPSRC Future Integrated Transport programme. The project is being carried out by staff at the Institute for Transport Studies (ITS) at the University of Leeds in collaboration with the Pedestrians Association and City of York Council. The overall aim of this project is to identify ways to encourage and enable more people to make more journeys on foot. The specific objectives are to: • quantify attitudes and perceptions held towards walking and the barriers to walking; • study the feasibility of developing a tool that can be used to evaluate pedestrian routes; • undertake validation of the tool. The achievement of these objectives will represent a thorough investigation into the two sides of providing for walking - the physical environment for pedestrians and people's attitudes to walking. Task 1 of the project is an extended literature review and survey of experts to identify an initial list of features that are thought to influence pedestrian use of the streets. The paper that follows is split into a number of sections which look at the different characteristics of pedestrians, factors which affect route choice, factors which affect mode choice, problems faced by pedestrians on our streets and a short review of recent Government (local and national) policy which has influenced pedestrian provision

European Railway Comparisons: Final Report

The Institute for Transport Studies (ITS), University of Leeds and the British Railways Board (BRB) carried out a major comparative study of Western European railways in the late 1970s (BRB and University of Leeds, 1979). Follow-up work was carried out by ITS financed by the Social Science Research Council and reported by Nash (1985). It was deaded to revive this work at ITS for a number of reasons: It is over ten years since the last set of comparisons (for 1981) were made at ITS and therefore a review of the changes in costs and productivity may be timely. There has been a number of technical developments that make the use of statistical cost analysis more promising. These developments include the use of more flexible functional forms such as the translog, and the development of comprehensive total factor productivity indices (see, for example, Dodgson, 1985 and, more recently, Hensher and Waters, 1993). There is increasing interest in the organisational structure of railway industries as a result of the 1988 Transport Act in Sweden, the EC directive 91/4-40 and the publication of proposals for privatising British Rail in July 1992 (see, for example, ECMT, 1993). Given the explosion in information technology, there were some hopes that data availability would have improved. (Continues..

VRU-TOO: Micro-Level Behavioural and Conflict Changes in the VRU-TOO Pilot Projects. Deliverable 15.

This report describes the results of an evaluation of pilot project pedestrian detection systems installed in three different European cities at in total six different sites. The implemented systems had the improvement of safety and comfort of pedestrians as objectives. The systems provided early detection of pedestrians approaching the crossing facility and detection of the presence of pedestrian on the crossing facility, allowing the onset of a pedestrian green phase or an extension of such a green phase. The evaluation involved the registration of pedestrian behaviour and pedestrian-vehicle encounters and conflicts. Pedestrian behaviour was recorded on videotape, conflicts were scored on the spot by trained observers. The behaviour recorded on videotape was later analysed using approach speed, nonnative behaviour and appropriate use of the crossing facilities as main indicators. In addition, pedestrian signal settings were recorded for each crossing. The evaluation design used a beforelafter measurement design with the after measurements being taken at least two weeks after the system implementation. The results indicated that although red light violations were reduced at some sites, they remained at a high level. The implementations had some positive effects on the normative behaviour of pedestrians. The percentage of pedestrians getting involved in encounters with motorized traffic was reduced at one site, increased at another and remained unchanged at the other sites. A significant reduction in conflicts was observed at several sites, but at other sites conflict occurrence remained unchanged. The system implementations had a very distinct positive effect on pedestrian delay. Required waiting times were reduced at all but one site and at some sites the reductions were substantial. Pedestrian comfort was also improved by an increase in the percentage of pedestrians arriving durhg the pedestrian green phase and the percentage being able to complete their crossing during pedestrian green. In summary, the evaluation study demonstrated that some safety effects and substantial effect on comfort were achieved by the implementation of the systems. The effects can be further optimized by selecting sites that fulfil specific requirements for successful implementation. Red light violation by pedestrian remains a serious safety problem and further studies should be undertaken how further reductions can be achieved by optimizing signal settings

Theory of parity violation in compound nuclear states; one particle aspects

In this work we formulate the reaction theory of parity violation in compound nuclear states using Feshbach's projection operator formalism. We derive in this framework a complete set of terms that contribute to the longitudinal asymmetry measured in experiments with polarized epithermal neutrons. We also discuss the parity violating spreading width resulting from this formalism. We then use the above formalism to derive expressions which hold in the case when the doorway state approximation is introduced. In applying the theory we limit ourselves in this work to the case when the parity violating potential and the strong interaction are one-body. In this approximation, using as the doorway the giant spin-dipole resonance and employing well known optical potentials and a time-reversal even, parity odd one-body interaction we calculate or estimate the terms we derived. In our calculations we explicitly orthogonalize the continuum and bound wave functions. We find the effects of orthogonalization to be very important. Our conclusion is that the present one-body theory cannot explain the average longitudinal asymmetry found in the recent polarized neutron experiments. We also confirm the discrepancy, first pointed out by Auerbach and Bowman, that emerges, between the calculated average asymmetry and the parity violating spreading width, when distant doorways are used in the theory.Comment: 37 pages, REVTEX, 5 figures not included (Postscript, available from the authors

Genome-Wide Association Study in BRCA1 Mutation Carriers Identifies Novel Loci Associated with Breast and Ovarian Cancer Risk

BRCA1-associated breast and ovarian cancer risks can be modified by common genetic variants. To identify further cancer risk-modifying loci, we performed a multi-stage GWAS of 11,705 BRCA1 carriers (of whom 5,920 were diagnosed with breast and 1,839 were diagnosed with ovarian cancer), with a further replication in an additional sample of 2,646 BRCA1 carriers. We identified a novel breast cancer risk modifier locus at 1q32 for BRCA1 carriers (rs2290854, P = 2.7×10-8, HR = 1.14, 95% CI: 1.09-1.20). In addition, we identified two novel ovarian cancer risk modifier loci: 17q21.31 (rs17631303, P = 1.4×10-8, HR = 1.27, 95% CI: 1.17-1.38) and 4q32.3 (rs4691139, P = 3.4×10-8, HR = 1.20, 95% CI: 1.17-1.38). The 4q32.3 locus was not associated with ovarian cancer risk in the general population or BRCA2 carriers, suggesting a BRCA1-specific associat

Measurement of the View the tt production cross-section using eμ events with b-tagged jets in pp collisions at √s = 13 TeV with the ATLAS detector

This paper describes a measurement of the inclusive top quark pair production cross-section (σtt¯) with a data sample of 3.2 fb−1 of proton–proton collisions at a centre-of-mass energy of √s = 13 TeV, collected in 2015 by the ATLAS detector at the LHC. This measurement uses events with an opposite-charge electron–muon pair in the final state. Jets containing b-quarks are tagged using an algorithm based on track impact parameters and reconstructed secondary vertices. The numbers of events with exactly one and exactly two b-tagged jets are counted and used to determine simultaneously σtt¯ and the efficiency to reconstruct and b-tag a jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section is measured to be: σtt¯ = 818 ± 8 (stat) ± 27 (syst) ± 19 (lumi) ± 12 (beam) pb, where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, the integrated luminosity and the LHC beam energy, giving a total relative uncertainty of 4.4%. The result is consistent with theoretical QCD calculations at next-to-next-to-leading order. A fiducial measurement corresponding to the experimental acceptance of the leptons is also presented

Search for strong gravity in multijet final states produced in pp collisions at √s=13 TeV using the ATLAS detector at the LHC

A search is conducted for new physics in multijet final states using 3.6 inverse femtobarns of data from proton-proton collisions at √s = 13TeV taken at the CERN Large Hadron Collider with the ATLAS detector. Events are selected containing at least three jets with scalar sum of jet transverse momenta (HT) greater than 1TeV. No excess is seen at large HT and limits are presented on new physics: models which produce final states containing at least three jets and having cross sections larger than 1.6 fb with HT > 5.8 TeV are excluded. Limits are also given in terms of new physics models of strong gravity that hypothesize additional space-time dimensions

Search for TeV-scale gravity signatures in high-mass final states with leptons and jets with the ATLAS detector at sqrt [ s ] = 13TeV

A search for physics beyond the Standard Model, in final states with at least one high transverse momentum charged lepton (electron or muon) and two additional high transverse momentum leptons or jets, is performed using 3.2 fb−1 of proton–proton collision data recorded by the ATLAS detector at the Large Hadron Collider in 2015 at √s = 13 TeV. The upper end of the distribution of the scalar sum of the transverse momenta of leptons and jets is sensitive to the production of high-mass objects. No excess of events beyond Standard Model predictions is observed. Exclusion limits are set for models of microscopic black holes with two to six extra dimensions