53 research outputs found
Towards sustainable production of formic acid
peer-reviewedFormic acid is a widely used commodity chemical. It can be applied as a safe, easily handled and
transported source of hydrogen or CO for different reactions including those producing fuels. The
review includes historical aspects of formic acid production. It shortly analyzes the production
based on traditional sources such as toxic CO, methanol and methane. However, the main emphasis
is done to the sustainable production of formic acid from biomass and biomass-derived products
via hydrolysis, wet and catalytic oxidation processes. New strategies of low temperature synthesis
from biomass may lead to utilization of formic acid for production of fuel additives such as
methanol, upgraded bio-oil, γ-valerolactone and its derivatives, as well as synthesis gas used for
Fischer-Tropsch synthesis of hydrocarbons. Some technological aspects are considered
First Evaluation of [11C]R116301 as an In Vivo Tracer of NK1 Receptors in Man
PURPOSE: NK1 receptors have been implicated in various neuropsychiatric and other disorders. R116301 is a selective NK1 receptor antagonist. In this pilot study, [(11)C]R116301 was evaluated as a potential positron emission tomography (PET) ligand for the NK1 receptor. PROCEDURES: Two dynamic PET studies were performed in three normal volunteers before and after a blocking dose of aprepitant. Data were analyzed using striatum to cerebellum standardized uptake value (SUV) ratios. RESULTS: Baseline SUV ratios at 60-90 min after injection ranged from 1.22 to 1.70. Following aprepitant administration, this specific signal was completely blocked. Aprepitant administration did not significantly affect uptake in cerebellum, confirming the absence of NK1 receptors in cerebellum. CONCLUSION: These preliminary results indicate that [(11)C]R116301 has potential as a radioligand for in vivo assessment of NK1 receptors in the human brai
New genetic loci link adipose and insulin biology to body fat distribution.
Body fat distribution is a heritable trait and a well-established predictor of adverse metabolic outcomes, independent of overall adiposity. To increase our understanding of the genetic basis of body fat distribution and its molecular links to cardiometabolic traits, here we conduct genome-wide association meta-analyses of traits related to waist and hip circumferences in up to 224,459 individuals. We identify 49 loci (33 new) associated with waist-to-hip ratio adjusted for body mass index (BMI), and an additional 19 loci newly associated with related waist and hip circumference measures (P < 5 × 10(-8)). In total, 20 of the 49 waist-to-hip ratio adjusted for BMI loci show significant sexual dimorphism, 19 of which display a stronger effect in women. The identified loci were enriched for genes expressed in adipose tissue and for putative regulatory elements in adipocytes. Pathway analyses implicated adipogenesis, angiogenesis, transcriptional regulation and insulin resistance as processes affecting fat distribution, providing insight into potential pathophysiological mechanisms
Post-intervention Status in Patients With Refractory Myasthenia Gravis Treated With Eculizumab During REGAIN and Its Open-Label Extension
OBJECTIVE: To evaluate whether eculizumab helps patients with anti-acetylcholine receptor-positive (AChR+) refractory generalized myasthenia gravis (gMG) achieve the Myasthenia Gravis Foundation of America (MGFA) post-intervention status of minimal manifestations (MM), we assessed patients' status throughout REGAIN (Safety and Efficacy of Eculizumab in AChR+ Refractory Generalized Myasthenia Gravis) and its open-label extension. METHODS: Patients who completed the REGAIN randomized controlled trial and continued into the open-label extension were included in this tertiary endpoint analysis. Patients were assessed for the MGFA post-intervention status of improved, unchanged, worse, MM, and pharmacologic remission at defined time points during REGAIN and through week 130 of the open-label study. RESULTS: A total of 117 patients completed REGAIN and continued into the open-label study (eculizumab/eculizumab: 56; placebo/eculizumab: 61). At week 26 of REGAIN, more eculizumab-treated patients than placebo-treated patients achieved a status of improved (60.7% vs 41.7%) or MM (25.0% vs 13.3%; common OR: 2.3; 95% CI: 1.1-4.5). After 130 weeks of eculizumab treatment, 88.0% of patients achieved improved status and 57.3% of patients achieved MM status. The safety profile of eculizumab was consistent with its known profile and no new safety signals were detected. CONCLUSION: Eculizumab led to rapid and sustained achievement of MM in patients with AChR+ refractory gMG. These findings support the use of eculizumab in this previously difficult-to-treat patient population. CLINICALTRIALSGOV IDENTIFIER: REGAIN, NCT01997229; REGAIN open-label extension, NCT02301624. CLASSIFICATION OF EVIDENCE: This study provides Class II evidence that, after 26 weeks of eculizumab treatment, 25.0% of adults with AChR+ refractory gMG achieved MM, compared with 13.3% who received placebo
Minimal Symptom Expression' in Patients With Acetylcholine Receptor Antibody-Positive Refractory Generalized Myasthenia Gravis Treated With Eculizumab
The efficacy and tolerability of eculizumab were assessed in REGAIN, a 26-week, phase 3, randomized, double-blind, placebo-controlled study in anti-acetylcholine receptor antibody-positive (AChR+) refractory generalized myasthenia gravis (gMG), and its open-label extension
The role of the complement system in arthritis and stroke
Complement is part of the innate immune system and functions primarily as a first line of defense against invading microorganisms. It is a complex cascade, which can be activated via three pathways: the classical, alternative and mannan-binding lectin pathway. To study the role of the complement system in disease pathogenesis, we have generated mice deficient in C3, which is the central protein in all three pathways, and mice deficient in factor B, which is critical for the activation of the alternative pathway. Using these complement deficient mice, we have found that complement activation by both the classical and the alternative pathways plays a critical role in two models of rheumatoid arthritis, namely collagen-induced arthritis and arthritis induced by arthritogenic monoclonal antibodies. Our findings indicate that antibody binding to collagen triggers the activation of the classical pathway, which is then amplified by the alternative pathway.When subjected to permanent focal brain ischemia by middle cerebral artery occlusion, the infarction volume in the C3 deficient mice was significantly larger than that in control mice. These results, together with the finding of reduced number of presumed neural progenitor cells in the penumbra and infarction area of C3 deficient mice, implicate the complement system as a positive regulator of neurogenesis in brain ischemia. Thus, besides its well-established role in host defense against pathogens, the complement system may have additional roles in disease pathogenesis: its activation appears to augment tissue damage in autoantibody-associated diseases such as arthritis, but may contribute to tissue repair after cerebral ischemia.Designing drugs targeting complement activation may be a rational therapeutic strategy. However, great care will have to be executed in defining and reaching the proper balance between the two contradictory effects of the complement system
Recommended from our members
The development of integrated chemical microsensors in GaAs
Monolithic, integrated acoustic wave chemical microsensors are being developed on gallium arsenide (GaAs) substrates. With this approach, arrays of microsensors and the high frequency electronic components needed to operate them reside on a single substrate, increasing the range of detectable analytes, reducing overall system size, minimizing systematic errors, and simplifying assembly and packaging. GaAs is employed because it is both piezoelectric, a property required to produce the acoustic wave devices, and a semiconductor with a mature microelectronics fabrication technology. Many aspects of integrated GaAs chemical sensors have been investigated, including: surface acoustic wave (SAW) sensors; monolithic SAW delay line oscillators; GaAs application specific integrated circuits (ASIC) for sensor operation; a hybrid sensor array utilizing these ASICS; and the fully monolithic, integrated SAW array. Details of the design, fabrication, and performance of these devices are discussed. In addition, the ability to produce heteroepitaxial layers of GaAs and aluminum gallium arsenide (AlGaAs) makes possible micromachined membrane sensors with improved sensitivity compared to conventional SAW sensors. Micromachining techniques for fabricating flexural plate wave (FPW) and thickness shear mode (TSM) microsensors on thin GaAs membranes are presented and GaAs FPW delay line and TSM resonator performance is described
Recommended from our members
Acoustic Wave Chemical Microsensors in GaAs
High sensitivity acoustic wave chemical microsensors are being developed on GaAs substrates. These devices take advantage of the piezoelectric properties of GaAs as well as its mature microelectronics fabrication technology and nascent micromachining technology. The design, fabrication, and response of GaAs SAW chemical microsensors are reported. Functional integrated GaAs SAW oscillators, suitable for chemical sensing, have been produced. The integrated oscillator requires 20 mA at 3 VK, operates at frequencies up to 500 MHz, and occupies approximately 2 mmz. Discrete GaAs sensor components, including IC amplifiers, SAW delay lines, and IC phase comparators have been fabricated and tested. A temperature compensation scheme has been developed that overcomes the large temperature dependence of GaAs acoustic wave devices. Packaging issues related to bonding miniature flow channels directly to the GaAs substrates have been resolved. Micromachining techniques for fabricating FPW and TSM microsensors on thin GaAs membranes are presented and GaAs FPW delay line performance is described. These devices have potentially higher sensitivity than existing GaAs and quartz SAW sensors
- …