Brane-world Quantum Gravity

The Arnowitt-Deser-Misner canonical formulation of general relativity is extended to the covariant brane-world theory in arbitrary dimensions. The exclusive probing of the extra dimensions makes a substantial difference, allowing for the construction of a non-constrained canonical theory. The quantum states of the brane-world geometry are defined by the Tomonaga-Schwinger equation, whose integrability conditions are determined by the classical perturbations of submanifolds contained in the Nash's differentiable embedding theorem. In principle, quantum brane-world theory can be tested by current experiments in astrophysics and by near future laboratory experiments at Tev energy. The implications to the black-hole information loss problem, to the accelerating cosmology, and to a quantum mathematical theory of four-sub manifolds are briefly commented.Comment: 14 pages, no figures, JHEP format, to appear in JHEP April 200

Fitomassa de adubos verdes e controle de plantas daninhas em diferentes densidades populacionias de leguminosas.

O objetivo deste trabalho foi avaliar a fitomassa de calopogônio, mucuna-preta, mucunarajada,feijão-de-porco, guandu de porte alto, Crotalaria spectabilis e C. breviflora sob diferentes densidades de semeadura (10, 20, 40, 80 e 160 sementes viáveis m-2), e o crescimento de plantas daninhas nessas densidades, em área de tabuleiros costeiros. O experimento foi desenvolvido de maio a agosto de 1996, no Campo Experimental “Antônio Martins”(EMDAGRO/Embrapa-CPATC), em Lagarto, SE. O número de plantas vivas na floração (NPVF) e a matéria seca da parte aérea das leguminosas (MSPA) foram determinados quando, em cada espécie, cerca de 50% das plantas floresceram. Maiores incrementos de MSPA, em resposta ao adensamento populacional, foram observados em C. spectabilis e C. breviflora, seguidas pelo calopogônio, mucuna-preta e mucuna-rajada. Em relação ao feijão-de-porco, a resposta foi negativa, enquanto com o guandu não houve influência. Quanto ao NPVF, as respostas ao adensamento foram lineares e positivas em C. spectabilis, C. breviflora e calopogônio, e quadráticas com ponto de máxima em feijão-de-porco,guandu e mucuna-rajada. Embora nenhum modelo tenha sido ajustado para expressar a relação entre NPVF e adensamento na semeadura de mucuna-preta, a sobrevivência dessa espécie foi reduzida em todas as densidades. Maiores inibições de plantas daninhas ocorreram nas parcelas de mucuna-preta e feijão-de-porco

Fitting the integrated Spectral Energy Distributions of Galaxies

Fitting the spectral energy distributions (SEDs) of galaxies is an almost universally used technique that has matured significantly in the last decade. Model predictions and fitting procedures have improved significantly over this time, attempting to keep up with the vastly increased volume and quality of available data. We review here the field of SED fitting, describing the modelling of ultraviolet to infrared galaxy SEDs, the creation of multiwavelength data sets, and the methods used to fit model SEDs to observed galaxy data sets. We touch upon the achievements and challenges in the major ingredients of SED fitting, with a special emphasis on describing the interplay between the quality of the available data, the quality of the available models, and the best fitting technique to use in order to obtain a realistic measurement as well as realistic uncertainties. We conclude that SED fitting can be used effectively to derive a range of physical properties of galaxies, such as redshift, stellar masses, star formation rates, dust masses, and metallicities, with care taken not to over-interpret the available data. Yet there still exist many issues such as estimating the age of the oldest stars in a galaxy, finer details ofdust properties and dust-star geometry, and the influences of poorly understood, luminous stellar types and phases. The challenge for the coming years will be to improve both the models and the observational data sets to resolve these uncertainties. The present review will be made available on an interactive, moderated web page (sedfitting.org), where the community can access and change the text. The intention is to expand the text and keep it up to date over the coming years.Comment: 54 pages, 26 figures, Accepted for publication in Astrophysics & Space Scienc

Validity and reliability of Gripwise digital dynamometer in the assessment of handgrip strength in older adults

Introduction With the advancement of studies on the importance of sarcopenia in the aging process, new technologies have been developed to assess muscle mass and function. However, most research on portable devices has not considered a wide range of ages and clinical conditions. This study aimed to evaluate the reliability of the Gripwise digital dynamometer in measuring handgrip strength in older Brazilian adults, comparing its performance with the widely used Saehan device.Methods A cross-sectional study was conducted with 149 participants (32 men and 117 women), with an average age of 69.5 years. Handgrip strength was measured using both the Gripwise and Saehan dynamometers. Reliability was assessed using the intraclass correlation coefficient (ICC). Analyses considered three handgrip strength measurements from both devices, as well as the highest value obtained. The classification of dynapenia (low muscle strength) was compared using different cutoff points proposed by Villain et al. (2023), Spexoto et al. (2022), and Cruz-Jentoft et al. (2019).Results Both dynamometers demonstrated excellent reliability, with ICC values above 0.90. However, significant differences in mean handgrip strength values were observed between the devices (approximately 3.5-four kgf). These variations impacted the classification of dynapenia, with the Gripwise identifying more cases of low muscle strength compared to Saehan.Conclusion The lower values reported by the Gripwise may impact clinical decision-making in two ways. On one hand, lower values may lead to earlier detection of muscle weakness, allowing for quicker intervention in individuals with strength below typical thresholds. However, this could also result in an overestimation of the prevalence of dynapenia if the values do not accurately reflect true muscle strength, which could lead to unnecessary interventions. Therefore, it is crucial to consider the need for adjustments in the cutoff points when using Gripwise. These findings highlight the need to revise cutoff points for dynapenia classification, considering device variations and model differences in older age groups

Measurement of D*+/- meson production in jets from pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

This paper reports a measurement of D*+/- meson production in jets from proton-proton collisions at a center-of-mass energy of sqrt(s) = 7 TeV at the CERN Large Hadron Collider. The measurement is based on a data sample recorded with the ATLAS detector with an integrated luminosity of 0.30 pb^-1 for jets with transverse momentum between 25 and 70 GeV in the pseudorapidity range |eta| < 2.5. D*+/- mesons found in jets are fully reconstructed in the decay chain: D*+ -> D0pi+, D0 -> K-pi+, and its charge conjugate. The production rate is found to be N(D*+/-)/N(jet) = 0.025 +/- 0.001(stat.) +/- 0.004(syst.) for D*+/- mesons that carry a fraction z of the jet momentum in the range 0.3 < z < 1. Monte Carlo predictions fail to describe the data at small values of z, and this is most marked at low jet transverse momentum.Comment: 10 pages plus author list (22 pages total), 5 figures, 1 table, matches published version in Physical Review

Gene silencing based on RNA-guided catalytically inactive Cas9 (dCas9): a new tool for genetic engineering in Leptospira

International audienceLeptospirosis is a worldwide zoonosis caused by pathogenic bacteria of the genus Leptospira, which also includes free-living saprophyte strains. Many aspects of leptospiral basic biology and virulence mechanisms remain unexplored mainly due to the lack of effective genetic tools available for these bacteria. Recently, the type II CRISPR/Cas system from Streptococcus pyogenes has been widely used as an efficient genome engineering tool in bacteria by inducing double-strand breaks (DSBs) in the desired genomic targets caused by an RNA-guided DNA endonuclease called Cas9, and the DSB repair associated machinery. In the present work, plasmids expressing heterologous S. pyogenes Cas9 in L. biflexa cells were generated, and the enzyme could be expressed with no apparent toxicity to leptospiral cells. However, L. biflexa cells were unable to repair RNA-guided Cas9-induced DSBs. Thus, we used a catalytically dead Cas9 (dCas9) to obtain gene silencing rather than disruption, in a strategy called CRISPR interference (CRISPRi). We demonstrated complete gene silencing in L. biflexa cells when both dCas9 and single-guide RNA (sgRNA) targeting the coding strand of the β-galactosidase gene were expressed simultaneously. Furthermore, when the system was applied for silencing the dnaK gene, no colonies were recovered, indicating that DnaK protein is essential in Leptospira. In addition, flagellar motor switch FliG gene silencing resulted in reduced bacterial motility. To the best of our knowledge, this is the first work applying the CRISPRi system in Leptospira and spirochetes in general, expanding the tools available for understanding leptospiral biology

Lean manufacturing applied to a wiring production process

This project was carried out at a company in the electric mobility sector, which manufactures chargers for electric vehicles, specifically in the wiring section. The main objective of the developed work was to improve the production processes in order to enhance responsiveness to the growing demand. After analyzing the processes in the section, the objectives were outlined to enable the improvement of some practices in the production department, such as the ones related to the organization of the raw material supermarket, as well as the calculation of the wiring consumption by chargers, and the implementation of a production control system. After the improvement actions were implemented, it was possible to observe a 14,9% reduction in the changeover process of the cable cutting process; weekly wiring consumptions were estimated, and procedures were defined to generate orders of raw material and supply to the workstation, which led to the elimination of stock shortages. In addition, worker autonomy increased and production downtime was reduced.info:eu-repo/semantics/publishedVersio

Analysis and improvement of the packaging sector of an industrial company

Manual operations in manufacturing companies are still a common practice. This often results in high costs, high cycle times and therefore in lower productivity, particularly for companies operating in western countries. This is why many manufacturing companies relocated their production facilities in low age countries. This study was developed at a leading Portuguese material construction manufacturing company. The objective was to improve the packaging and labeling processes, that were identified as main bottlenecks in the factory. Lean was used to streamline these processes before being automated. This allowed for annual savings of 12432 €, with human operators being reallocated to other departments where they are more useful. Furthermore, cycle times were reduced by 42,9%, non-value-added activities were minimized, and operations with potentially high ergonomic risks were eliminated. In addition, a reduction of 84,3% in lithographed packaging was achieved, with a cost reduction of around 36 000 €/year, which is expected to continue in the forthcoming years.info:eu-repo/semantics/publishedVersio

RECORRÊNCIA DE ALAGAMENTOS NA CIDADE DE TEÓFILO OTONI, MINAS GERAIS: UM ESTUDO INICIAL NO BAIRRO NOVO HORIZONTE

A desarmonia entre ocupação, uso do solo e planejamentos estrutural e ambiental geralmente levam a ocorrência de sérios problemas à população. Nesse sentido, este estudo busca relatar o histórico do local, pesquisar motivos dos casos ocorridos e apresentar providências iniciais. Os alagamentos decorrem da habitação descontrolada, falta de fiscalização por parte das autoridades e inexistência de ações para diminuir os riscos e prevenir desastres futuros

Search for supersymmetry in final states with jets, missing transverse momentum and one isolated lepton in sqrt{s} = 7 TeV pp collisions using 1 fb-1 of ATLAS data

We present an update of a search for supersymmetry in final states containing jets, missing transverse momentum, and one isolated electron or muon, using 1.04 fb^-1 of proton-proton collision data at sqrt{s} = 7 TeV recorded by the ATLAS experiment at the LHC in the first half of 2011. The analysis is carried out in four distinct signal regions with either three or four jets and variations on the (missing) transverse momentum cuts, resulting in optimized limits for various supersymmetry models. No excess above the standard model background expectation is observed. Limits are set on the visible cross-section of new physics within the kinematic requirements of the search. The results are interpreted as limits on the parameters of the minimal supergravity framework, limits on cross-sections of simplified models with specific squark and gluino decay modes, and limits on parameters of a model with bilinear R-parity violation.Comment: 18 pages plus author list (30 pages total), 9 figures, 4 tables, final version to appear in Physical Review