Azimuthal anisotropy of charged particles at high transverse momenta in PbPb collisions at sqrt(s[NN]) = 2.76 TeV

The azimuthal anisotropy of charged particles in PbPb collisions at nucleon-nucleon center-of-mass energy of 2.76 TeV is measured with the CMS detector at the LHC over an extended transverse momentum (pt) range up to approximately 60 GeV. The data cover both the low-pt region associated with hydrodynamic flow phenomena and the high-pt region where the anisotropies may reflect the path-length dependence of parton energy loss in the created medium. The anisotropy parameter (v2) of the particles is extracted by correlating charged tracks with respect to the event-plane reconstructed by using the energy deposited in forward-angle calorimeters. For the six bins of collision centrality studied, spanning the range of 0-60% most-central events, the observed v2 values are found to first increase with pt, reaching a maximum around pt = 3 GeV, and then to gradually decrease to almost zero, with the decline persisting up to at least pt = 40 GeV over the full centrality range measured.Comment: Replaced with published version. Added journal reference and DO

Search for new physics with same-sign isolated dilepton events with jets and missing transverse energy

A search for new physics is performed in events with two same-sign isolated leptons, hadronic jets, and missing transverse energy in the final state. The analysis is based on a data sample corresponding to an integrated luminosity of 4.98 inverse femtobarns produced in pp collisions at a center-of-mass energy of 7 TeV collected by the CMS experiment at the LHC. This constitutes a factor of 140 increase in integrated luminosity over previously published results. The observed yields agree with the standard model predictions and thus no evidence for new physics is found. The observations are used to set upper limits on possible new physics contributions and to constrain supersymmetric models. To facilitate the interpretation of the data in a broader range of new physics scenarios, information on the event selection, detector response, and efficiencies is provided.Comment: Published in Physical Review Letter

Multizone Paper Platform for 3D Cell Cultures

In vitro 3D culture is an important model for tissues in vivo. Cells in different locations of 3D tissues are physiologically different, because they are exposed to different concentrations of oxygen, nutrients, and signaling molecules, and to other environmental factors (temperature, mechanical stress, etc). The majority of high-throughput assays based on 3D cultures, however, can only detect the average behavior of cells in the whole 3D construct. Isolation of cells from specific regions of 3D cultures is possible, but relies on low-throughput techniques such as tissue sectioning and micromanipulation. Based on a procedure reported previously (“cells-in-gels-in-paper” or CiGiP), this paper describes a simple method for culture of arrays of thin planar sections of tissues, either alone or stacked to create more complex 3D tissue structures. This procedure starts with sheets of paper patterned with hydrophobic regions that form 96 hydrophilic zones. Serial spotting of cells suspended in extracellular matrix (ECM) gel onto the patterned paper creates an array of 200 micron-thick slabs of ECM gel (supported mechanically by cellulose fibers) containing cells. Stacking the sheets with zones aligned on top of one another assembles 96 3D multilayer constructs. De-stacking the layers of the 3D culture, by peeling apart the sheets of paper, “sections” all 96 cultures at once. It is, thus, simple to isolate 200-micron-thick cell-containing slabs from each 3D culture in the 96-zone array. Because the 3D cultures are assembled from multiple layers, the number of cells plated initially in each layer determines the spatial distribution of cells in the stacked 3D cultures. This capability made it possible to compare the growth of 3D tumor models of different spatial composition, and to examine the migration of cells in these structures

Measurement of the t(t)over-bar production cross section in pp collisions at √s=7 TeV with lepton plus jets final states

This is the pre-print version of the Article. The official published can be accessed from the link below. Copyright @ 2013 ElsevierA measurement of the tt¯ production cross section in pp collisions at √s=7 TeV is presented. The results are based on data corresponding to an integrated luminosity of 2.3 fb−1 collected by the CMS detector at the LHC. Selected events are required to have one isolated, high transverse momentum electron or muon, large missing transverse energy, and hadronic jets, at least one of which must be consistent with having originated from a b quark. The measured cross section is 158.1 ± 2.1 (stat.) ± 10.2(syst.) ± 3.5 (lum.) pb, in agreement with standard model predictions.This study is funded by the: BMWF and FWF (Austria); FNRS and FWO (Belgium); CNPq, CAPES, FAPERJ, and FAPESP (Brazil); MEYS (Bulgaria); CERN; CAS, MoST, and NSFC (China); COLCIENCIAS (Colombia); MSES (Croatia); RPF (Cyprus); MoER, SF0690030s09 and ERDF (Estonia); Academy of Finland, MEC, and HIP (Finland); CEA and CNRS/IN2P3 (France); BMBF, DFG, and HGF (Germany); GSRT (Greece); OTKA and NKTH (Hungary); DAE and DST (India); IPM (Iran); SFI (Ireland); INFN (Italy); NRF and WCU (Republic of Korea); LAS (Lithuania); CINVESTAV, CONACYT, SEP, and UASLP-FAI (Mexico); MSI (New Zealand); PAEC (Pakistan); MSHE and NSC (Poland); FCT (Portugal); JINR (Armenia, Belarus, Georgia, Ukraine, Uzbekistan); MON, RosAtom, RAS and RFBR (Russia); MSTD (Serbia); SEIDI and CPAN (Spain); Swiss Funding Agencies (Switzerland); NSC (Taipei); ThEPCenter, IPST and NSTDA (Thailand); TUBITAK and TAEK (Turkey); NASU (Ukraine); STFC (United Kingdom); DOE and NSF (USA)

Search for supersymmetry in events with b jets and missing transverse momentum at the LHC

A search for supersymmetry is presented using a sample of events with b jets and missing transverse momentum. The search uses a data sample of proton-proton collisions at a centre-of-mass energy of 7TeV, corresponding to an integrated luminosity of 35 pb(-1), collected with the CMS detector. A total of 0.33(-0.33)(+0.43) (stat.) +/- 0.13 (syst.) events is predicted, using control samples in the data, to arise from standard model processes, and one event is observed in the data. Upper limits are set at the 95% confidence level on the cross sections of benchmark supersymmetric models

Indications of suppression of excited Υ states in Pb-Pb collisions at √sNN = 2.76TeV

This is the pre-print version of the Published Article which can be accessed from the link below.A comparison of the relative yields of Υ resonances in the μ+μ- decay channel in Pb-Pb and pp collisions at a center-of-mass energy per nucleon pair of 2.76 TeV is performed with data collected with the CMS detector at the LHC. Using muons of transverse momentum above 4  GeV/c and pseudorapidity below 2.4, the double ratio of the Υ(2S) and Υ(3S) excited states to the Υ(1S) ground state in Pb-Pb and pp collisions, [Υ(2S+3S)/Υ(1S)]Pb-Pb/[Υ(2S+3S)/Υ(1S)]pp, is found to be 0.31-0.15+0.19(stat)±0.03(syst). The probability to obtain the measured value, or lower, if the true double ratio is unity, is calculated to be less than 1%

Searches for new physics using the t(t)over-bar invariant mass distribution in pp collisions at √s=8 TeV

This is the pre-print version of the final published paper that is available from the link belowSearches for anomalous top quark-antiquark production are presented, based on pp collisions at √s=8  TeV . The data, corresponding to an integrated luminosity of 19:7 fb^-1, were collected with the CMS detector at the LHC. The observed tt invariant mass spectrum is found to be compatible with the standard model prediction. Limits on the production cross section times branching fraction probe, for the first time, a region of parameter space for certain models of new physics not yet constrained by precision measurements

Measurement of the WZ production cross section in pp collisions at root s=13 Tev

Peer reviewe

Measurement of the t-channel single top quark production cross section in pp collisions at √s = 7TeV

This is the pre-print version of the Published Article which can be accessed from the link below.Electroweak production of the top quark is measured for the first time in pp collisions at √s=7  TeV, using a data set collected with the CMS detector at the LHC and corresponding to an integrated luminosity of 36  pb-1. With an event selection optimized for t-channel production, two complementary analyses are performed. The first one exploits the special angular properties of the signal, together with background estimates from the data. The second approach uses a multivariate analysis technique to probe the compatibility with signal topology expected from electroweak top-quark production. The combined measurement of the cross section is 83.6±29.8(stat+syst)±3.3(lumi)  pb, consistent with the standard model expectation