Medición de la conductividad térmica en materiales aislantes bajo régimen de flujo de calor no estacionario

A device to measure thermal conductivity in thermal insulating solid materials commonly used in buildings was developed following a one-dimensional model of heat flow through a plate of the material to be evaluated. The temperature gradient between the plate faces was measured as a function of time by means of a set of type T thermocouples. A circuit with commercial microcontrollers was designed to control the instrument’s mechanisms, the acquisition and the treatment of data. In preliminary tests with some materials, thermal conductivity values similar to those reported in the literature were obtained by using a linear adjustment with R values between 0.90 and 0.98. This device turns out to be a good instrument for measuring thermal conductivity because it has several advantages, such as: easy implementation, sample size, measurement method; compared to those using traditional methods.Se desarrolló un dispositivo para medir la conductividad térmica en materiales sólidos para aislamiento térmico de uso común en edificaciones, siguiendo un modelo unidimensional de flujo de calor que atraviesa una placa del material a evaluar. Se mide el gradiente de temperatura entre las caras de la placa en función del tiempo, usando un arreglo diferencial de termopares tipo T. Para el control de los mecanismos del instrumento, la adquisición y tratamiento de los datos, se diseñó un circuito con microcontroladores comerciales. En ensayos previos con algunos materiales se obtuvieron valores la conductividad térmica similares a los reportados en la literatura utilizando un ajuste lineal con valores de R entre 0.90 y 0.98. El dispositivo obtenido representa un instrumento útil para la medición de la conductividad térmica, destacando entre sus ventajas: la fácil construcción, el tamaño de las muestras a evaluar y el método de medida, comparado con los métodos tradicionales para medir este parámetro

Evidence of Insulin Resistance and Other Metabolic Alterations in Boys with Duchenne or Becker Muscular Dystrophy

Aim. Our aim was (1) to determine the frequency of insulin resistance (IR) in patients with Duchenne/Becker muscular dystrophy (DMD/BMD), (2) to identify deleted exons of DMD gene associated with obesity and IR, and (3) to explore some likely molecular mechanisms leading to IR. Materials and Methods. In 66 patients with DMD/BMD without corticosteroids treatment, IR, obesity, and body fat mass were evaluated. Molecules involved in glucose metabolism were analyzed in muscle biopsies. Results show that 18.3%, 22.7%, and 68% were underweight, overweight, or obese, and with high adiposity, respectively; 48.5% and 36.4% presented hyperinsulinemia and IR, respectively. Underweight patients (27.3%) exhibited hyperinsulinemia and IR. Carriers of deletions in exons 45 (OR = 9.32; 95% CI = 1.16–74.69) and 50 (OR = 8.73; 95% CI = 1.17–65.10) from DMD gene presented higher risk for IR than noncarriers. We observed a greater staining of cytoplasmic aggregates for GLUT4 in muscle biopsies than healthy muscle tissue. Conclusion. Obesity, hyperinsulinemia, and IR were observed in DMD/BMD patients and are independent of corticosteroids treatment. Carriers of deletion in exons 45 or 50 from DMD gene are at risk for developing IR. It is suggested that alteration in GLUT4 in muscle fibers from DMD patients could be involved in IR

Duchenne muscular dystrophy in a developing country: Challenges in management and genetic counseling

Background and objective: Multidisciplinary management of Duchenne Muscular Dystrophy (DMD) has achieved outstanding results in developed nations. We aimed to describe the status of diagnosis and management of DMD in a developing country through the experience of non-profit organizations. Methods: A Multistate, multiple-source, population-based survey was performed from medical records of 432 patients. Data were retrospectively collected, reviewed and curated by health specialists; including clinical features, age at first symptoms, age at diagnosis, disease progression and management, family history, education, age and cause of death. Results: There is a delay in noticing first symptoms and it did not diminish over the past 20 years. Less than 30% of patients obtained definite diagnosis and most of them are in physiotherapy programs but not under steroid treatment. In our study, family history does not anticipate recognition of symptoms compared to sporadic cases (p=0.05). Approximately 93.33% of our patients attended to education programs. Mean age at death was 18.94 ± 6.73 years and the most frequent cause was pneumonia. Conclusion: Delayed diagnosis of DMD in Mexico is mainly caused by the late detection of first symptoms. There is no difference in early detection of symptoms between familiar and sporadic cases. Lifespan of patients in our cohort is reduced compared to developed countries. The late diagnosis and low percentage of definite cases may affect patient management and genetic counseling and could also preclude participation of patients into novel clinical trials

Duchenne muscular dystrophy in a developing country: Challenges in management and genetic counseling

Background and objective: Multidisciplinary management of Duchenne Muscular Dystrophy (DMD) has achieved outstanding results in developed nations. We aimed to describe the status of diagnosis and management of DMD in a developing country through the experience of non-profit organizations. Methods: A Multistate, multiple-source, population-based survey was performed from medical records of 432 patients. Data were retrospectively collected, reviewed and curated by health specialists; including clinical features, age at first symptoms, age at diagnosis, disease progression and management, family history, education, age and cause of death. Results: There is a delay in noticing first symptoms and it did not diminish over the past 20 years. Less than 30% of patients obtained definite diagnosis and most of them are in physiotherapy programs but not under steroid treatment. In our study, family history does not anticipate recognition of symptoms compared to sporadic cases (p=0.05). Approximately 93.33% of our patients attended to education programs. Mean age at death was 18.94 Zapotitlán 6.73 years and the most frequent cause was pneumonia. Conclusion: Delayed diagnosis of DMD in Mexico is mainly caused by the late detection of first symptoms. There is no difference in early detection of symptoms between familiar and sporadic cases. Lifespan of patients in our cohort is reduced compared to developed countries. The late diagnosis and low percentage of definite cases may affect patient management and genetic counseling and could also preclude participation of patients into novel clinical trials

XVII International Congress of Control Electronics and Telecommunications: "Advanced Science, Technology and Innovation to move towards a new socio-technical system: Sustainable Social Transformation"

Contenido: Approach to the diagnostic of cesarean birth using bio-inspired models. ; Design of a tool in a virtual reality environment to manipulate anatomical models. ; The effect of COVID-19 restrictions on the electricity price forecasting models. ; Depression prevention through artificial intelligence. ; State of the art in Prototypes as complements to the learning of the Colombian Sign Language (LSC). ; A computational proposal for gene expression deterministic analysis in associated disorders to depression and anxiety. ; Evaluation of postural stability from the predictability of the measurement of the center of pressure. ; Psychophysiological Analysis of Sound Stimuli.; Delphi method for the identification of relevant variables in the development of low-power photovoltaic solar projects. ; Socioeconomic impact of a refrigerator powered by a photovoltaic system in La Guajira. ; Energy Efficiency: characteristics that allow the reduction of greenhouse gases in. ; Possibilities for the implementation of a bioreactor from organic waste. ; Energy Potential with Small Hydroelectric Power Plants in Non- interconnected Zones of Colombia. ; Energy Potential in Photovoltaic Solar Solutions in Non-Interconnected Areas of Colombia. ; Photovoltaic system, towards the energy transition from home. ; Blockchain model to increase the transparency of public sector processes. ; Intelligent agricultural irrigation prescription system based on sensor networks and crop modeling. ; Design and implementation of a digital modulation classification system using intelligent algorithms. ; A mobile application proposal to minimize intermediation during agricultural process distribution of products in supply chain. ; Accompanying strategy for the social appropriation of new technologies in vulnerable agricultural communities: case in communities producing Gulupas fruits (Passiflora edulis Sims). ; Predictive model of transparency as an indicator of Public Policies. ; Smart system for recognition of ripening level in blackberry fruits. ; Project-based learning as an alternative methodology for technological education in electronics. ; Design and construction of an automated system for N. ; Four bar mechanisms (FBM) and their Software-Based applications: a reviewFT aquaponic culture of Red Carp and Crespa Lettuce. ; Intelligent search implementation for the construction of states of the art: a python application. ; Indoor and Outdoor propagation models on 5G environments: state of the art. ;The electronic detection of offenders (DOO) in the District Secretary of mobility of Bogotá: a step forward in the configuration of the concept of digital citizenship in Colombia. ; Monitoring through ICT of Mobility: technological collaborative feature to incorporate IoT in a Smart City. ; Characterization model of asphalt mixtures using digital image processing. ; Review: identification of diseases and/or pests in fruit trees through image processing techniques and artificial intelligence. ; VRS applicated to Nasa Yuwe language. ; Application of Pix2Pix for edge reconstruction in images. ; Brushless DC Motor Control System for Active Myoelectric Prosthesis. ; Implementation of a Water Conductivity Measuring System. ; 2 DOF robot programmed with MatLab® (guide and Peter Corke) and Arduino uno for writing alphabetical characters. ; Simulator of the behavior of the center of mass in a quadruped robot. ; Biomimetic prototype for flapping movement of batsContent: Contenido: Approach to the diagnostic of cesarean birth using bio-inspired models. ; Design of a tool in a virtual reality environment to manipulate anatomical models. ; The effect of COVID-19 restrictions on the electricity price forecasting models. ; Depression prevention through artificial intelligence. ; State of the art in Prototypes as complements to the learning of the Colombian Sign Language (LSC). ; A computational proposal for gene expression deterministic analysis in associated disorders to depression and anxiety. ; Evaluation of postural stability from the predictability of the measurement of the center of pressure. ; Psychophysiological Analysis of Sound Stimuli.; Delphi method for the identification of relevant variables in the development of low-power photovoltaic solar projects. ; Socioeconomic impact of a refrigerator powered by a photovoltaic system in La Guajira. ; Energy Efficiency: characteristics that allow the reduction of greenhouse gases in. ; Possibilities for the implementation of a bioreactor from organic waste. ; Energy Potential with Small Hydroelectric Power Plants in Non- interconnected Zones of Colombia. ; Energy Potential in Photovoltaic Solar Solutions in Non-Interconnected Areas of Colombia. ; Photovoltaic system, towards the energy transition from home. ; Blockchain model to increase the transparency of public sector processes. ; Intelligent agricultural irrigation prescription system based on sensor networks and crop modeling. ; Design and implementation of a digital modulation classification system using intelligent algorithms. ; A mobile application proposal to minimize intermediation during agricultural process distribution of products in supply chain. ; Accompanying strategy for the social appropriation of new technologies in vulnerable agricultural communities: case in communities producing Gulupas fruits (Passiflora edulis Sims). ; Predictive model of transparency as an indicator of Public Policies. ; Smart system for recognition of ripening level in blackberry fruits. ; Project-based learning as an alternative methodology for technological education in electronics. ; Design and construction of an automated system for N. ; Four bar mechanisms (FBM) and their Software-Based applications: a reviewFT aquaponic culture of Red Carp and Crespa Lettuce. ; Intelligent search implementation for the construction of states of the art: a python application. ; Indoor and Outdoor propagation models on 5G environments: state of the art. ;The electronic detection of offenders (DOO) in the District Secretary of mobility of Bogotá: a step forward in the configuration of the concept of digital citizenship in Colombia. ; Monitoring through ICT of Mobility: technological collaborative feature to incorporate IoT in a Smart City. ; Characterization model of asphalt mixtures using digital image processing. ; Review: identification of diseases and/or pests in fruit trees through image processing techniques and artificial intelligence. ; VRS applicated to Nasa Yuwe language. ; Application of Pix2Pix for edge reconstruction in images. ; Brushless DC Motor Control System for Active Myoelectric Prosthesis. ; Implementation of a Water Conductivity Measuring System. ; 2 DOF robot programmed with MatLab® (guide and Peter Corke) and Arduino uno for writing alphabetical characters. ; Simulator of the behavior of the center of mass in a quadruped robot. ; Biomimetic prototype for flapping movement of bat