Hybrid materials based on polyethylene and MCM-41 microparticles functionalized with silanes: catalytic aspects of in situ polymerization, crystalline features and mechanical properties

New nanocomposites based on polyethylene have been prepared by in situ polymerization of ethylene in presence of mesoporous MCM-41. The polymerization reactions were performed using a zirconocene catalyst either under homogenous conditions or supported onto mesoporous MCM-41 particles, which are synthesized and decorated post-synthesis with two silanes before polymerization in order to promote an enhanced interfacial adhesion. The existence of polyethylene chains able to crystallize within the mesoporous channels in the resulting nanocomposites is figured out from the small endothermic process, located at around 80 C, on heating calorimetric experiments, in addition to the main melting endotherm. These results indicate that polyethylene macrochains can grow up during polymerization either outside or inside the MCM-41 channels, these keeping their regular hexagonal arrangements. Mechanical response is observed to be dependent on the content in mesoporous MCM-41 and on the crystalline features of polyethylene. Accordingly, stiffness increases and deformability decreases in the nanocomposites as much as MCM-41 content is enlarged and polyethylene amount within channels is raised. Ultimate mechanical performance improves with MCM-41 incorporation without varying the final processing temperature

UHMWPE/HDPE in-reactor blends, prepared by in situ polymerization: synthetic aspects and characterization

This work covers the synthesis and characterization of in-reactor Ultra-High Molecular Weight Polyethylene/ High Density Polyethylene, UHMWPE/HDPE, blends by in situ polymerization in a single reactor, through dual catalyst immobilization. These blends are synthesized combining two different catalysts (one for each targeted molar mass) co-immobilized in mesoporous Santa Barbara Amorphous, SBA-15, particles. First, the ethylene polymerization behavior is investigated, under different polymerization conditions. Then, studies on the thermal, mechanical and rheological characteristics of the produced in-reactor blends are presented and their performance is compared and discussed in a comprehensive way. Moreover, the effect of different filler contents on the properties exhibited by the resulting materials is investigated. Results have shown that these in-reactor UHMWPE/HDPE blends exhibit a complex thermal, mechanical and rheological behavior, which depends mainly on the proportion between the two polymer components and on the amount of SBA-15.info:eu-repo/semantics/publishedVersio

Dual-Composite Right-Left Handed Transmission Lines for the Design of Compact Diplexers

In this study, the use of dual-composite right-left-handed (D-CRLH) transmission lines is proposed for the design of diplexers. The D-CRLH diplexers present advantages over conventional diplexers such as smaller size (especially in the ultra high frequency band). The design procedure and the design equations are presented in this paper. The non-linear phase response of a D-CRLH transmission line has been used to design diplexers at any arbitrary frequencies. Finally, two diplexers have been designed and manufactured: one for quite near frequencies and the other for further ones. The simulation results show good agreement with the measurements. A sensitivity analysis has been provided to show the robustness of this kind of circuits

The drivers of change for the contribution of small farms to regional food security in Europe

The capacity of the food system to respond to the economic, demographic and environmental challenges ahead has become a topic of increasing interest, with particular attention to the roles and responsibilities of the different actors to ensure more sustainable food systems that can guarantee food and nutrition security for all. In this paper we approach the need to better understand the factors that can condition the potential contribution of small farms to regional food and nutrition security in Europe, acknowledging the role that small farms play in Europe at present. The analysis is based on a survey to 94 experts from 17 regions (NUTS3 level) in 11 different European countries, which identified the drivers of change according to the regional experts. These drivers were then categorized and their relative relevance assessed. The results indicate that some relevant drivers in the European context are linked to the capacity to adopt technologies and practices allowing adaptation to climate change, and the capacity to connect to food markets, with emphasis in the need for cooperation and collective action. The weight of other more European-specific drivers such as ‘consumer values and habits’ reveal that the future role of small farms will be very dependent on a societal change, with equity becoming a relevant component of consumers’ choice

Synthesis and Pharmacological Evaluation of New N-Sulfonylureas as NLRP3 Inflammasome Inhibitors: Identification of a Hit Compound to Treat Gout

NLRP3 is involved in the pathophysiology of several inflammatory diseases. Therefore, there is high current interest in the clinical development of new NLRP3 inflammasome small inhibitors to treat these diseases. Novel N-sulfonylureas were obtained by the replacement of the hexahydroindacene moiety of the previously described NLRP3 inhibitor MCC950. These new derivatives show moderate to high potency in inhibiting IL-1β release in vitro. The greatest effect was observed for compound 4b, which was similar to MCC950. Moreover, compound 4b was able to reduce caspase-1 activation, oligomerization of ASC, and therefore, IL-1β processing. Additional in silico predictions confirmed the safety profile of compound 4b, and in vitro studies in AML12 hepatic cells confirmed the absence of toxicological effects. Finally, we evaluated in vivo anti-inflammatory properties of compound 4b, which showed a significant anti-inflammatory effect and reduced mechanical hyperalgesia at 3 and 10 mg/kg (i.p.) in an in vivo mouse model of gout.J.E. thanks Fondo de Investigaciones Sanitarias (ISCIII/ FEDER) (Programa Miguel Servet: CP19/00005 and PI19/ 00082) and Fundación Mutua Madrileñ a. D.D.-I. thanks the Spanish Ministry of Science, Innovation, and Universities for predoctoral FPU grant

Data size increment for fault detection on rotating machinery

En los últimos años se ha incrementado el uso de técnicas de modelamiento basado en datos para el diagnóstico de fallos en maquinaria rotativa. Estas técnicas requieren de grandes cantidades de datos que no siempre se pueden obtener pues generan  altos costos y tiempo excesivo, que son difíciles de solventar desde el punto de vista económico y técnico.  El presente trabajo se enfoca en el pre-procesamiento de las señales de vibración y propone un método para incrementar el número de series temporales informativas de una máquina rotativa sin el incremento del tiempo y costos en la etapa de adquisición de las señales. Como resultado se ha obtenido una ampliación de 315 señales en la fase de adquisición de datos a 429000 luego de la aplicación del método; cantidad adecuada para la construcción de modelos basados en datos, incluso de deep learning para la detección de fallos en maquinaria rotativa. Palabras clave: Adquisición de datos, pre-procesamiento, rodamientos, señales.  

Precise measurement of the W-boson mass with the CDF II detector

We have measured the W-boson mass MW using data corresponding to 2.2/fb of integrated luminosity collected in proton-antiproton collisions at 1.96 TeV with the CDF II detector at the Fermilab Tevatron collider. Samples consisting of 470126 W->enu candidates and 624708 W->munu candidates yield the measurement MW = 80387 +- 12 (stat) +- 15 (syst) = 80387 +- 19 MeV. This is the most precise measurement of the W-boson mass to date and significantly exceeds the precision of all previous measurements combined

Stability Analysis and Design of Negative Impedance Converters: Application to Circuit and Small Antennas

Negative impedance converters (NICs) have been proposed as structures to improve the performance of RF circuits and electrically small antennas. However, NICs suffer from stability problems. This paper presents a compact procedure to analyze the stability of NICs. Then, the required and sufficient conditions to predict the stability of a negative impedance converter are given. These conditions can be evaluated using standard computer-aided-design software. Finally, a NIC prototype is given to validate and illustrate the presented design procedure, it is also integrated with a printed, blade-type, electrically small monopole in the VHF ban

Indication for the disappearance of reactor electron antineutrinos in the Double Chooz experiment

The Double Chooz Experiment presents an indication of reactor electron antineutrino disappearance consistent with neutrino oscillations. A ratio of 0.944 $\pm$ 0.016 (stat) $\pm$ 0.040 (syst) observed to predicted events was obtained in 101 days of running at the Chooz Nuclear Power Plant in France, with two 4.25 GW$_{th}$ reactors. The results were obtained from a single 10 m$^3$ fiducial volume detector located 1050 m from the two reactor cores. The reactor antineutrino flux prediction used the Bugey4 measurement as an anchor point. The deficit can be interpreted as an indication of a non-zero value of the still unmeasured neutrino mixing parameter \sang. Analyzing both the rate of the prompt positrons and their energy spectrum we find \sang = 0.086 $\pm$ 0.041 (stat) $\pm$ 0.030 (syst), or, at 90% CL, 0.015 $<$ \sang $\ <$ 0.16.Comment: 7 pages, 4 figures, (new version after PRL referee's comments

Study of Spin and Decay-Plane Correlations of W Bosons in the e+e- -> W+W- Process at LEP

Data collected at LEP at centre-of-mass energies \sqrt(s) = 189 - 209 GeV are used to study correlations of the spin of W bosons using e+e- -> W+W- -> lnqq~ events. Spin correlations are favoured by data, and found to agree with the Standard Model predictions. In addition, correlations between the W-boson decay planes are studied in e+e- -> W+W- -> lnqq~ and e+e- -> W+W- -> qq~qq~ events. Decay-plane correlations, consistent with zero and with the Standard Model predictions, are measured