Applying series braking resistors to improve the stability of low inertia synchronous generators

Widely held concerns over the environmental impact of emissions from large fossil fuelled generating plants are serving to promote the connection of renewable or sustainable generation onto distribution networks. Many such generators are synchronous machines with low values of inertia, and thus possess short critical clearance times to avoid the onset of transient instability. With fault clearance times of up to 1s occurring in distribution networks, there is the potential for a growing problem as distributed generation makes up a larger proportion of installed capacity. This paper proposes the use of series braking resistors that are switched into circuit at the generator terminals as a means of improving transient stability, and thus avoid, or at least defer major upgrades to distribution system protectio

Comparing plasma and faecal measures of steroid hormones in Adelie penguins Pygoscelis adeliae

Physiological measurements of both stress and sex hormones are often used to estimate the consequences of natural or human-induced change in ecological studies of various animals. Different methods of hormone measurement exist, potentially explaining variation in results across studies; methods should be cross-validated to ensure that they correlate. We directly compared faecal and plasma hormone measurements for the first time in a wild free-living species, the Adelie penguin (Pygoscelis adeliae). Blood and faecal samples were simultaneously collected from individual penguins for comparison and assayed for testosterone and corticosterone (or their metabolites). Sex differences and variability within each measure, and correlation of values across measures were compared. For both hormones, plasma samples showed greater variation than faecal samples. Males had higher mean corticosterone concentrations than females, but the difference was only statistically significant in faecal samples. Plasma testosterone, but not faecal testosterone, was significantly higher in males than females. Correlation between sample types was poor overall, and weaker in females than in males, perhaps because measures from plasma represent hormones that are both free and bound to globulins, whereas measures from faeces represent only the free portion. Faecal samples also represent a cumulative measure of hormones over time, as opposed to a plasma ‘snapshot’ concentration. Our data indicate that faecal sampling appears more suitable for assessing baseline hormone concentrations, whilst plasma sampling may best define immediate responses to environmental events. Consequently, future studies should ensure that they select the most appropriate matrix and method of hormone measurement to answer their research questions

What do people do with porn? qualitative research into the consumption, use and experience of pornography and other sexually explicit media

This article reviews qualitative research into the consumption of pornography and other sexually explicit media emerging from a range of subject areas. Taking a critique of quantitative methods and a focus on measuring sexual effects and attitudes as a starting point, it considers the proposition that qualitative work is more suited to an examination of the complex social, cultural and political constructions of sexuality. Examining studies into the way men, women and young people see, experience, and use explicit media texts, the article identifies the key findings that have emerged. Qualitative work shows that sexuality explicit media texts are experienced and understood in a variety of ways and evoke strong and often contradictory reactions, not all of which are represented in public debates about pornography. These texts function in a range of different ways, depending on context; as a source of knowledge, a resource for intimate practices, a site for identity construction, and an occasion for performing gender and sexuality. The article reviews these studies and their findings, identifying what they suggest about directions for future research, both in terms of developing methodology and refining approaches to sexuality and media consumption.</p

Helicity Analysis of Semileptonic Hyperon Decays Including Lepton Mass Effects

Using the helicity method we derive complete formulas for the joint angular decay distributions occurring in semileptonic hyperon decays including lepton mass and polarization effects. Compared to the traditional covariant calculation the helicity method allows one to organize the calculation of the angular decay distributions in a very compact and efficient way. In the helicity method the angular analysis is of cascade type, i.e. each decay in the decay chain is analyzed in the respective rest system of that particle. Such an approach is ideally suited as input for a Monte Carlo event generation program. As a specific example we take the decay $\Xi^0 \to \Sigma^+ + l^- + \bar{\nu}_l$ ($l^-=e^-, \mu^-$) followed by the nonleptonic decay $\Sigma^+ \to p + \pi^0$ for which we show a few examples of decay distributions which are generated from a Monte Carlo program based on the formulas presented in this paper. All the results of this paper are also applicable to the semileptonic and nonleptonic decays of ground state charm and bottom baryons, and to the decays of the top quark.Comment: Published version. 40 pages, 11 figures included in the text. Typos corrected, comments added, references added and update

A measurement of the tau mass and the first CPT test with tau leptons

We measure the mass of the tau lepton to be 1775.1+-1.6(stat)+-1.0(syst.) MeV using tau pairs from Z0 decays. To test CPT invariance we compare the masses of the positively and negatively charged tau leptons. The relative mass difference is found to be smaller than 3.0 10^-3 at the 90% confidence level.Comment: 10 pages, 4 figures, Submitted to Phys. Letts.

Measurement of the Michel Parameters in Leptonic Tau Decays

The Michel parameters of the leptonic tau decays are measured using the OPAL detector at LEP. The Michel parameters are extracted from the energy spectra of the charged decay leptons and from their energy-energy correlations. A new method involving a global likelihood fit of Monte Carlo generated events with complete detector simulation and background treatment has been applied to the data recorded at center-of-mass energies close to sqrt(s) = M(Z) corresponding to an integrated luminosity of 155 pb-1 during the years 1990 to 1995. If e-mu universality is assumed and inferring the tau polarization from neutral current data, the measured Michel parameters are extracted. Limits on non-standard coupling constants and on the masses of new gauge bosons are obtained. The results are in agreement with the V-A prediction of the Standard Model.Comment: 32 pages, LaTeX, 9 eps figures included, submitted to the European Physical Journal

First Measurement of Z/gamma* Production in Compton Scattering of Quasi-real Photons

We report the first observation of Z/gamma* production in Compton scattering of quasi-real photons. This is a subprocess of the reaction e+e- to e+e-Z/gamma*, where one of the final state electrons is undetected. Approximately 55 pb-1 of data collected in the year 1997 at an e+e- centre-of-mass energy of 183 GeV with the OPAL detector at LEP have been analysed. The Z/gamma* from Compton scattering has been detected in the hadronic decay channel. Within well defined kinematic bounds, we measure the product of cross-section and Z/gamma* branching ratio to hadrons to be (0.9+-0.3+-0.1) pb for events with a hadronic mass larger than 60 GeV, dominated by (e)eZ production. In the hadronic mass region between 5 GeV and 60 GeV, dominated by (e)egamma* production, this product is found to be (4.1+-1.6+-0.6) pb. Our results agree with the predictions of two Monte Carlo event generators, grc4f and PYTHIA.Comment: 18 pages, LaTeX, 5 eps figures included, submitted to Physics Letters

A Measurement of the Product Branching Ratio f(b->Lambda_b).BR(Lambda_b->Lambda X) in Z0 Decays

The product branching ratio, f(b->Lambda_b).BR(Lambda_b->Lambda X), where Lambda_b denotes any weakly-decaying b-baryon, has been measured using the OPAL detector at LEP. Lambda_b are selected by the presence of energetic Lambda particles in bottom events tagged by the presence of displaced secondary vertices. A fit to the momenta of the Lambda particles separates signal from B meson and fragmentation backgrounds. The measured product branching ratio is f(b->Lambda_b).BR(Lambda_b->Lambda X) = (2.67+-0.38(stat)+0.67-0.60(sys))% Combined with a previous OPAL measurement, one obtains f(b->Lambda_b).BR(Lambda_b->Lambda X) = (3.50+-0.32(stat)+-0.35(sys))%.Comment: 16 pages, LaTeX, 3 eps figs included, submitted to the European Physical Journal

WW Production Cross Section and W Branching Fractions in e+e- Collisions at 189 GeV

From a data sample of 183 pb^-1 recorded at a center-of-mass energy of roots = 189 GeV with the OPAL detector at LEP, 3068 W-pair candidate events are selected. Assuming Standard Model W boson decay branching fractions, the W-pair production cross section is measured to be sigmaWW = 16.30 +- 0.34(stat.) +- 0.18(syst.) pb. When combined with previous OPAL measurements, the W boson branching fraction to hadrons is determined to be 68.32 +- 0.61(stat.) +- 0.28(syst.) % assuming lepton universality. These results are consistent with Standard Model expectations.Comment: 22 pages, 5 figures, submitted to Phys. Lett.

Measurement of D*+/- meson production in jets from pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

This paper reports a measurement of D*+/- meson production in jets from proton-proton collisions at a center-of-mass energy of sqrt(s) = 7 TeV at the CERN Large Hadron Collider. The measurement is based on a data sample recorded with the ATLAS detector with an integrated luminosity of 0.30 pb^-1 for jets with transverse momentum between 25 and 70 GeV in the pseudorapidity range |eta| < 2.5. D*+/- mesons found in jets are fully reconstructed in the decay chain: D*+ -> D0pi+, D0 -> K-pi+, and its charge conjugate. The production rate is found to be N(D*+/-)/N(jet) = 0.025 +/- 0.001(stat.) +/- 0.004(syst.) for D*+/- mesons that carry a fraction z of the jet momentum in the range 0.3 < z < 1. Monte Carlo predictions fail to describe the data at small values of z, and this is most marked at low jet transverse momentum.Comment: 10 pages plus author list (22 pages total), 5 figures, 1 table, matches published version in Physical Review