Unsteady Two-Dimensional Orifice Flow: A Large-Size Experimental Investigation

Orifice flows were used as water clocks since the Antiquity up to the 16-th century. Today orifices and nozzles are used for measuring discharges. Most works were conducted with steady flow conditions and there is little information on the unsteady flow pattern. In this study, the writers describe an experimental investigation of an unsteady orifice flow discharging vertically. The study was conducted in a large-size facility with a rectangular orifice (0.75-m by 0.07-m) discharging up to 1.2 m3 in about 10 seconds. The study presents new information on the unsteady flow patterns, the discharge capacity and the velocity field in the reservoir. The results are compared with 'classical' orifice flow results

Genetic noise control via protein oligomerization

Gene expression in a cell entails random reaction events occurring over disparate time scales. Thus, molecular noise that often results in phenotypic and population-dynamic consequences sets a fundamental limit to biochemical signaling. While there have been numerous studies correlating the architecture of cellular reaction networks with noise tolerance, only a limited effort has been made to understand the dynamic role of protein-protein interactions. Here we have developed a fully stochastic model for the positive feedback control of a single gene, as well as a pair of genes (toggle switch), integrating quantitative results from previous in vivo and in vitro studies. We find that the overall noise-level is reduced and the frequency content of the noise is dramatically shifted to the physiologically irrelevant high-frequency regime in the presence of protein dimerization. This is independent of the choice of monomer or dimer as transcription factor and persists throughout the multiple model topologies considered. For the toggle switch, we additionally find that the presence of a protein dimer, either homodimer or heterodimer, may significantly reduce its random switching rate. Hence, the dimer promotes the robust function of bistable switches by preventing the uninduced (induced) state from randomly being induced (uninduced). The specific binding between regulatory proteins provides a buffer that may prevent the propagation of fluctuations in genetic activity. The capacity of the buffer is a non-monotonic function of association-dissociation rates. Since the protein oligomerization per se does not require extra protein components to be expressed, it provides a basis for the rapid control of intrinsic or extrinsic noise

Organisational barriers to the facilitation of overseas volunteering and training placements in the NHS

Background Undertaking a period of voluntary work or a professional placement overseas has long been a feature of medical training in the UK. There are now a number of high profile National Health Service (NHS) initiatives aimed at increasing access to such opportunities for staff at all levels. We present findings from a qualitative study involving a range of NHS staff and other stakeholders which explored barriers to participation in these activities. Methods A grounded theory methodology was drawn upon to conduct thematic based analysis. Our data included in-depth, semi-structured interviews with a range of returned volunteers, non-volunteers and other stakeholders (n=51) who were, or had been, employed by the NHS. Results There are significant barriers to placement and volunteering activity stemming from structural and organisational shortcomings within the NHS. Difficulties in filling clinical roles has a significant impact on the ability of staff to plan and undertake independent placements. There is currently no clearly defined pathway within the NHS by which the majority of grades can apply for, or organise, a period of overseas voluntary or professional placement activity. There were divergent views on the relevance and usefulness of overseas professional placements. Conclusions We argue that in the context of current UK policy initiatives aimed at facilitating overseas volunteer and professional placement activity, urgent attention needs to be given to the structural and organisational framework within which such initiatives will be required to work

Ethical considerations of corporate social responsibility - A South African perspective

Today, companies are under increasing pressure to implement corporate social responsibility [CSR] programmes that account for the economic, social and environmental impacts of their operations. In addition to companies voluntarily wanting to be seen as responsible corporate citizens, the requirement for CSR reporting is being institutionalised by the King Code of Governance [King III] in South Africa. The application of King III is mandatory for all companies listed on the Johannesburg Stock Exchange [JSE], albeit on an 'apply or explain' basis. King III requires companies to not only disclose their CSR performance, but also to ensure that such disclosures have been independently assured. Irrespective of the underlying reason for companies disclosing their CSR performance and for providing independent assurance thereon, companies are moving away from simplistically applying the cliche attributed to Friedman that "the social responsibility of business was to use its resources to engage in activities that would increase profits". Companies that have traditionally provided financial reporting to shareholders, are now beginning to account for their non-financial performance to other stakeholders as well. This paradigm shift requires those charged with company governance and reporting (including accounting professionals usually associated with financial reporting), to re-examine their morals, values and ethical beliefs

Application of the Shiono and Knight Method in asymmetric compound channels with different side slopes of the internal wall

The Shiono and Knight Method (SKM) is widely used to predict the lateral distribution of depth-averaged velocity and boundary shear stress for flows in compound channels. Three calibrating coefficients need to be estimated for applying the SKM, namely eddy viscosity coefficient (λ), friction factor (f) and secondary flow coefficient (k). There are several tested methods which can satisfactorily be used to estimate λ, f. However, the calibration of secondary flow coefficients k to account for secondary flow effects correctly is still problematic. In this paper, the calibration of secondary flow coefficients is established by employing two approaches to estimate correct values of k for simulating asymmetric compound channel with different side slopes of the internal wall. The first approach is based on Abril and Knight (2004) who suggest fixed values for main channel and floodplain regions. In the second approach, the equations developed by Devi and Khatua (2017) that relate the variation of the secondary flow coefficients with the relative depth (β) and width ratio (α) are used. The results indicate that the calibration method developed by Devi and Khatua (2017) is a better choice for calibrating the secondary flow coefficients than using the first approach which assumes a fixed value of k for different flow depths. The results also indicate that the boundary condition based on the shear force continuity can successfully be used for simulating rectangular compound channels, while the continuity of depth-averaged velocity and its gradient is accepted boundary condition in simulations of trapezoidal compound channels. However, the SKM performance for predicting the boundary shear stress over the shear layer region may not be improved by only imposing the suitable calibrated values of secondary flow coefficients. This is because difficulties of modelling the complex interaction that develops between the flows in the main channel and on the floodplain in this region

Language and anxiety: an ethnographic study of international postgraduate students

This paper presents some findings from an ethnographic study of international postgraduate students at a university in the South of England, which involved interviews and participant observation over a twelve-month academic year. One of the major themes that emerged from this research was students’ anxiety over their level of English language. Although all students entered their course with a minimum level of IELTS 6, the majority felt disadvantaged by particularly poor spoken English, and suffered feelings of anxiety, shame and inferiority. Low self-confidence meant that they felt ill-equipped to engage in class discussion and in social interaction which used English as the medium of communication. A common reaction to stress caused by language problems was to retreat into monoethnic communication with students from the same country, further inhibiting progress in language. Whilst some linguistic progress was made by nearly all students during the academic sojourn, the anxiety suffered by students in the initial stage must not be underestimated, and appropriate support systems must be put in place to alleviate their distress

Union effectiveness: In Search of the Holy Grail

YesThis article revisits the concept of union effectiveness and proposes a conceptual model to inform its study and application. Previous conceptual and empirical work is examined to identify key strengths and weaknesses, and to relate the union effectiveness concept to union renewal and other key concepts. This leads to the proposal of a Goal-System framework that builds and improves on prior research

Measurement of the top quark-pair production cross section with ATLAS in pp collisions at \sqrt{s}=7\TeV

A measurement of the production cross-section for top quark pairs(\ttbar) in $pp$ collisions at \sqrt{s}=7 \TeV is presented using data recorded with the ATLAS detector at the Large Hadron Collider. Events are selected in two different topologies: single lepton (electron $e$ or muon $\mu$) with large missing transverse energy and at least four jets, and dilepton ($ee$, $\mu\mu$ or $e\mu$) with large missing transverse energy and at least two jets. In a data sample of 2.9 pb-1, 37 candidate events are observed in the single-lepton topology and 9 events in the dilepton topology. The corresponding expected backgrounds from non-\ttbar Standard Model processes are estimated using data-driven methods and determined to be $12.2 \pm 3.9$ events and $2.5 \pm 0.6$ events, respectively. The kinematic properties of the selected events are consistent with SM \ttbar production. The inclusive top quark pair production cross-section is measured to be \sigmattbar=145 \pm 31 ^{+42}_{-27} pb where the first uncertainty is statistical and the second systematic. The measurement agrees with perturbative QCD calculations.Comment: 30 pages plus author list (50 pages total), 9 figures, 11 tables, CERN-PH number and final journal adde

Inclusive search for same-sign dilepton signatures in pp collisions at root s=7 TeV with the ATLAS detector

An inclusive search is presented for new physics in events with two isolated leptons (e or mu) having the same electric charge. The data are selected from events collected from p p collisions at root s = 7 TeV by the ATLAS detector and correspond to an integrated luminosity of 34 pb(-1). The spectra in dilepton invariant mass, missing transverse momentum and jet multiplicity are presented and compared to Standard Model predictions. In this event sample, no evidence is found for contributions beyond those of the Standard Model. Limits are set on the cross-section in a fiducial region for new sources of same-sign high-mass dilepton events in the ee, e mu and mu mu channels. Four models predicting same-sign dilepton signals are constrained: two descriptions of Majorana neutrinos, a cascade topology similar to supersymmetry or universal extra dimensions, and fourth generation d-type quarks. Assuming a new physics scale of 1 TeV, Majorana neutrinos produced by an effective operator V with masses below 460 GeV are excluded at 95% confidence level. A lower limit of 290 GeV is set at 95% confidence level on the mass of fourth generation d-type quarks

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011