Green composites based on wheat gluten matrix and posidonia oceanica waste fibers as reinforcements

[EN] In this work, green composites from renewable resources were manufactured and characterized. A fibrous material derived from Posidonia oceanica wastes with high cellulose content (close to 90 wt% of the total organic component) was used as reinforcing material. The polymeric matrix to bind the fibers was a protein (wheat gluten) type material. Composites were made by hot-press molding by varying the gluten content on composites in the 10¿40 wt% range. Mechanical properties were evaluated by standardized flexural tests. Thermo-mechanical behavior of composites was evaluated with dynamic mechanical analysis (torsion DMA) and determination of heat deflection temperature. Morphology of samples was studied by scanning electronic microscopy and the water uptake in terms of the water submerged time was evaluated to determine the maximum water uptake of the fibers in the composites. Composites with 10¿40 wt% gluten show interesting mechanical performance, similar or even higher to many commodity and technical plastics, such as polypropylene. Water resistance of these composites increases with the amount of gluten. Therefore, the sensitiveness to the water of the composites can be tailored with the amount of gluten in their formulation.The authors would like to acknowledge the Wallenberg and Lars-Erik Thunholms Foundation for the economical support through the concession of a Postdoctoral Fellowship in Forest related. Authors would also like to thank Marcos and Elena for helping in collecting P. oceanica balls.Ferrero Penadés, B.; Boronat Vitoria, T.; Moriana Torró, R.; Fenollar Gimeno, OÁ.; Balart Gimeno, RA. (2013). Green composites based on wheat gluten matrix and posidonia oceanica waste fibers as reinforcements. Polymer Composites. 34(10):1663-1669. doi:10.1002/pc.22567S16631669341

A comparison of body composition assessment methods in climbers: Which is better?

Objective To compare body composition estimations of field estimation methods: Durnin & Womersley anthropometry (DW-ANT), bioelectrical impedance analysis (BIA) and Deborah-Kerr anthropometry (DK-ANT) against dual-energy X-ray absorptiometry (DXA) in a male Chilean sport climbing sample. Methods 30 adult male climbers of different performance levels participated in the study. A DXA scan (Lunar Prodigy (R)) was used to determine fat mass, lean mass and total bone mineral content (BMC). Total muscle mass (MM, kg) was estimated through a validated prediction model. DW-ANT and BIA ("non-athletes" and "athletes" equations) were used to determinate fat mass percentage (FM %), while DK-ANT was utilized to estimate MM and BMC. Results A significant (p<0.01) inter-method difference was observed for all methods analyzed. When compared to DXA, DW-ANT and BIA underestimated FM% and DK-ANT overestimated MM and BMC (All p< 0.01). The inter-method differences was lower for DW-ANT. Discussion We found that body composition estimation in climbers is highly method dependent. If DXA is not available, DW-ANT for FM% has a lower bias of estimation than BIA in young male Chilean climbers. For MM and BMC, further studies are needed to compare and estimate the DK-ANT bias level. For both methods, correction equations for specific climbing population should be considered

Designer carbon nanotubes for contaminant removal in water and wastewater: A critical review

The search for effective materials for environmental cleanup is a scientific and technological issue of paramount importance. Among various materials, carbon nanotubes (CNTs) possess unique physicochemical, electrical, and mechanical properties that make them suitable for potential applications as environmental adsorbents, sensors, membranes, and catalysts. Depending on the intended application and the chemical nature of the target contaminants, CNTs can be designed through specific functionalization or modification processes. Designer CNTs can remarkably enhance contaminant removal efficiency and facilitate nanomaterial recovery and regeneration. An increasing number of CNT-based materials have been used to treat diverse organic, inorganic, and biological contaminants. These success stories demonstrate their strong potential in practical applications, including wastewater purification and desalination. However, CNT-based technologies have not been broadly accepted for commercial use due to their prohibitive cost and the complex interactions of CNTs with other abiotic and biotic environmental components. This paper presents a critical review of the existing literature on the interaction of various contaminants with CNTs in water and soil environments. The preparation methods of various designer CNTs (surface functionalized and/or modified) and the functional relationships between their physicochemical characteristics and environmental uses are discussed. This review will also help to identify the research gaps that must be addressed for enhancing the commercial acceptance of CNTs in the environmental remediation industry