Improving Prediction of Wireline Data Using Artificial Neural Network

This paper is dedicated to investigate the capabilities of artificial neural network (ANN) to improve prediction of petrophysical properties. Furthermore, this project is intended to test capability of network to predict the logging tools readings based on other tools readings. For petrophysical data prediction, it will be limited to predicting values of porosity by comparing predicted values from different models and values obtained from core data. Data obtained for core is considered to be the most accurate representation of petrophysical data. Hence, it is used as a reference data for testing capabilities of the model and training ANN networks

Seismic Performance and Building Height Limits of Ductile Reinforced Concrete Masonry Shear Walls with Boundary Elements

The National Building Code of Canada, NBCC-15, has recently added a new Seismic Force Resisting System (SFRS) category, ductile shear walls, for Reinforced Concrete Masonry (RCM) buildings. Although it is given a higher ductility-related force modification factor, Rd=3.0, compared to that of moderately ductile walls Rd=2.0, NBCC-15 assigned the same building height limits for the ductile and moderately ductile RCM walls. The research work outlined herein contributes to the understanding of the seismic performance and collapse capacity of ductile RCM shear wall buildings with boundary elements. The main objective is to develop component and system levels, solutions and design recommendations to enhance the overall seismic performance of RCM buildings. At the component (structural element) level, it is proposed to utilize RCM shear walls with boundary elements built using C-shaped masonry blocks. To quantify the component’s seismic performance, six half-scale high-rise RCM shear walls were constructed and tested under high constant axial compressive load, along with in-plane fully reversed cyclic loading synchronized with top moment. The tested walls represented the plastic hinge region of prototype 6- and 12-storey RCM structural walls. The studied parameters are the boundary element’s length, the boundary element’s vertical reinforcement ratio, the wall’s shear span-to-depth ratio, the type of masonry blocks used in constructing the boundary elements (stretcher or C-shaped), and the lap splicing of vertical rebars in the plastic hinge region. At the system (building) level, a hybrid structural system composed of ductile and gravity walls is proposed. The ductile walls are RCM shear walls with boundary elements, whereas the gravity walls are conventional rectangular RCM walls with no special seismic detailing. Several archetype buildings were designed according to NBCC-15 and the Canadian masonry design standard CSA S304-14 with varying heights, location’s seismicity, ductile shear wall ratios and cross-sectional configurations. Validated macro-modelling approaches were utilized to simulate the nonlinear response of the buildings. A series of linear and nonlinear, pseudo-static and dynamic time-history analyses were performed to quantify the influence of the studied parameters on the seismic response and collapse capacity. Besides, the possibility of increasing the height limits of ductile RCM shear walls was evaluated. Finally, the potential for reducing and terminating the specially detailed boundary elements over the building’s height was investigated. The results of the experimental testing confirmed that the presence of the well-detailed and confined boundary elements is capable of mitigating the impacts of the high axial compression load. Using the C-shaped masonry blocks instead of the regular stretcher blocks in constructing the boundary elements enhanced the construction and performance of the walls. Lap splicing of vertical rebars increased the initial lateral stiffness, the rate of stiffness and strength degradation, and slightly limited the displacement ductility. However, with proper detailing of the splice and confinement of the end zones, the premature tensile bond failure was prevented. Based on the findings of the numerical simulations, it was suggested to increase the height limits of RCM buildings with ductile shear walls with boundary elements. In addition, the results emphasized that utilizing the ductile walls with boundary elements, instead of the traditional rectangular walls, in the proposed hybrid structural system enhanced the structural response and optimized the design. Furthermore, the results demonstrated the possibility of vertically reducing and terminating the specially detailed boundary elements. Therefore, the experimental and numerical results of this research form a step forward in presenting RCM shear walls with boundary elements as a practical and competitive SFRS

Expression and purification of recombinant Shiga toxin 2B from Escherichia coli O157:H7

Enterohemorrhagic Escherichia coli are important human food-borne pathogens. Recently, Shiga toxinproducing E. coli (STEC) causes life-threatening hemolytic-uremic syndrome (HUS). In this study, Stx2B gene, a subunit of Shiga toxin, was amplified via polymerase chain reaction (PCR) from the chromosomal DNA of clinical fecal sample using appropriate primers. The PCR product was cloned to commercially available plasmid pH6HTN His6HaloTag® T7 containing two purification tags, namely, six histadine tag and Halo tag. The integrity of the constructed plasmid was confirmed using restriction enzyme mapping and sequencing. Then, Stx2B protein expressed after induction with isopropyl β-D-1-thiogalactopyranoside (IPTG) in E. coli JM109 (DE3) under the control of the T7 promotor. The two step purification trains were used to purify native Stx2B. First step purification was Ni-immobilized metal ion affinity chromatography (IMAC) column, followed by second step using HaloLink resin. The native Stx2B was obtained after column cleavage of halo-tag using HaloTEV protease. Maximum protein expression of Stx2B economically was obtained using 1 mM IPTG for 4 h at 37°C. Protein identity was confirmed by a band at ~11.4 kDa using 15% sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and StxB2 yield was 450 μg ml-1 confirmed by Bradford assay. Recombinant Stx2B protein was produced in highly pure yield using HaloTag technology.Key words: Escherichia coli O157:H7, StxB gene, expression, HaloTag technology, purification

Facile synthesis of new pyrano[3,2-c]quinolones via the reaction of quinolin-2-ones with ethene-1,2,3,4-tetracarbonitrile

Synthesis of heteroannulated pyrano[3,2-c] quinolones was established starting from the reaction of 4-hydroxyquinolin-2-ones with ethene-1,2,3,4-tetracarbonitrile. Several conditions were carried out, and the corresponding product yields were illustrated. The neutral and non-polar condition was the best procedure for product formation. The structure of products was elucidated by NMR, IR, mass spectra, and elemental analysis. X-ray structure analysis was also used to elucidate the structure of the obtained products. The mechanism of products formation was also discussed.Peer reviewe

Antimicrobial resistance among migrants in Europe: a systematic review and meta-analysis

BACKGROUND: Rates of antimicrobial resistance (AMR) are rising globally and there is concern that increased migration is contributing to the burden of antibiotic resistance in Europe. However, the effect of migration on the burden of AMR in Europe has not yet been comprehensively examined. Therefore, we did a systematic review and meta-analysis to identify and synthesise data for AMR carriage or infection in migrants to Europe to examine differences in patterns of AMR across migrant groups and in different settings. METHODS: For this systematic review and meta-analysis, we searched MEDLINE, Embase, PubMed, and Scopus with no language restrictions from Jan 1, 2000, to Jan 18, 2017, for primary data from observational studies reporting antibacterial resistance in common bacterial pathogens among migrants to 21 European Union-15 and European Economic Area countries. To be eligible for inclusion, studies had to report data on carriage or infection with laboratory-confirmed antibiotic-resistant organisms in migrant populations. We extracted data from eligible studies and assessed quality using piloted, standardised forms. We did not examine drug resistance in tuberculosis and excluded articles solely reporting on this parameter. We also excluded articles in which migrant status was determined by ethnicity, country of birth of participants' parents, or was not defined, and articles in which data were not disaggregated by migrant status. Outcomes were carriage of or infection with antibiotic-resistant organisms. We used random-effects models to calculate the pooled prevalence of each outcome. The study protocol is registered with PROSPERO, number CRD42016043681. FINDINGS: We identified 2274 articles, of which 23 observational studies reporting on antibiotic resistance in 2319 migrants were included. The pooled prevalence of any AMR carriage or AMR infection in migrants was 25·4% (95% CI 19·1-31·8; I2 =98%), including meticillin-resistant Staphylococcus aureus (7·8%, 4·8-10·7; I2 =92%) and antibiotic-resistant Gram-negative bacteria (27·2%, 17·6-36·8; I2 =94%). The pooled prevalence of any AMR carriage or infection was higher in refugees and asylum seekers (33·0%, 18·3-47·6; I2 =98%) than in other migrant groups (6·6%, 1·8-11·3; I2 =92%). The pooled prevalence of antibiotic-resistant organisms was slightly higher in high-migrant community settings (33·1%, 11·1-55·1; I2 =96%) than in migrants in hospitals (24·3%, 16·1-32·6; I2 =98%). We did not find evidence of high rates of transmission of AMR from migrant to host populations. INTERPRETATION: Migrants are exposed to conditions favouring the emergence of drug resistance during transit and in host countries in Europe. Increased antibiotic resistance among refugees and asylum seekers and in high-migrant community settings (such as refugee camps and detention facilities) highlights the need for improved living conditions, access to health care, and initiatives to facilitate detection of and appropriate high-quality treatment for antibiotic-resistant infections during transit and in host countries. Protocols for the prevention and control of infection and for antibiotic surveillance need to be integrated in all aspects of health care, which should be accessible for all migrant groups, and should target determinants of AMR before, during, and after migration. FUNDING: UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College Healthcare Charity, the Wellcome Trust, and UK National Institute for Health Research Health Protection Research Unit in Healthcare-associated Infections and Antimictobial Resistance at Imperial College London

Surgical site infection after gastrointestinal surgery in high-income, middle-income, and low-income countries: a prospective, international, multicentre cohort study

Background: Surgical site infection (SSI) is one of the most common infections associated with health care, but its importance as a global health priority is not fully understood. We quantified the burden of SSI after gastrointestinal surgery in countries in all parts of the world. Methods: This international, prospective, multicentre cohort study included consecutive patients undergoing elective or emergency gastrointestinal resection within 2-week time periods at any health-care facility in any country. Countries with participating centres were stratified into high-income, middle-income, and low-income groups according to the UN's Human Development Index (HDI). Data variables from the GlobalSurg 1 study and other studies that have been found to affect the likelihood of SSI were entered into risk adjustment models. The primary outcome measure was the 30-day SSI incidence (defined by US Centers for Disease Control and Prevention criteria for superficial and deep incisional SSI). Relationships with explanatory variables were examined using Bayesian multilevel logistic regression models. This trial is registered with ClinicalTrials.gov, number NCT02662231. Findings: Between Jan 4, 2016, and July 31, 2016, 13 265 records were submitted for analysis. 12 539 patients from 343 hospitals in 66 countries were included. 7339 (58·5%) patient were from high-HDI countries (193 hospitals in 30 countries), 3918 (31·2%) patients were from middle-HDI countries (82 hospitals in 18 countries), and 1282 (10·2%) patients were from low-HDI countries (68 hospitals in 18 countries). In total, 1538 (12·3%) patients had SSI within 30 days of surgery. The incidence of SSI varied between countries with high (691 [9·4%] of 7339 patients), middle (549 [14·0%] of 3918 patients), and low (298 [23·2%] of 1282) HDI (p < 0·001). The highest SSI incidence in each HDI group was after dirty surgery (102 [17·8%] of 574 patients in high-HDI countries; 74 [31·4%] of 236 patients in middle-HDI countries; 72 [39·8%] of 181 patients in low-HDI countries). Following risk factor adjustment, patients in low-HDI countries were at greatest risk of SSI (adjusted odds ratio 1·60, 95% credible interval 1·05–2·37; p=0·030). 132 (21·6%) of 610 patients with an SSI and a microbiology culture result had an infection that was resistant to the prophylactic antibiotic used. Resistant infections were detected in 49 (16·6%) of 295 patients in high-HDI countries, in 37 (19·8%) of 187 patients in middle-HDI countries, and in 46 (35·9%) of 128 patients in low-HDI countries (p < 0·001). Interpretation: Countries with a low HDI carry a disproportionately greater burden of SSI than countries with a middle or high HDI and might have higher rates of antibiotic resistance. In view of WHO recommendations on SSI prevention that highlight the absence of high-quality interventional research, urgent, pragmatic, randomised trials based in LMICs are needed to assess measures aiming to reduce this preventable complication

Burnout among surgeons before and during the SARS-CoV-2 pandemic: an international survey

Background: SARS-CoV-2 pandemic has had many significant impacts within the surgical realm, and surgeons have been obligated to reconsider almost every aspect of daily clinical practice. Methods: This is a cross-sectional study reported in compliance with the CHERRIES guidelines and conducted through an online platform from June 14th to July 15th, 2020. The primary outcome was the burden of burnout during the pandemic indicated by the validated Shirom-Melamed Burnout Measure. Results: Nine hundred fifty-four surgeons completed the survey. The median length of practice was 10&nbsp;years; 78.2% included were male with a median age of 37&nbsp;years old, 39.5% were consultants, 68.9% were general surgeons, and 55.7% were affiliated with an academic institution. Overall, there was a significant increase in the mean burnout score during the pandemic; longer years of practice and older age were significantly associated with less burnout. There were significant reductions in the median number of outpatient visits, operated cases, on-call hours, emergency visits, and research work, so, 48.2% of respondents felt that the training resources were insufficient. The majority (81.3%) of respondents reported that their hospitals were included in the management of COVID-19, 66.5% felt their roles had been minimized; 41% were asked to assist in non-surgical medical practices, and 37.6% of respondents were included in COVID-19 management. Conclusions: There was a significant burnout among trainees. Almost all aspects of clinical and research activities were affected with a significant reduction in the volume of research, outpatient clinic visits, surgical procedures, on-call hours, and emergency cases hindering the training. Trial registration: The study was registered on clicaltrials.gov "NCT04433286" on 16/06/2020

Global economic burden of unmet surgical need for appendicitis

Background: There is a substantial gap in provision of adequate surgical care in many low-and middle-income countries. This study aimed to identify the economic burden of unmet surgical need for the common condition of appendicitis. Methods: Data on the incidence of appendicitis from 170 countries and two different approaches were used to estimate numbers of patients who do not receive surgery: as a fixed proportion of the total unmet surgical need per country (approach 1); and based on country income status (approach 2). Indirect costs with current levels of access and local quality, and those if quality were at the standards of high-income countries, were estimated. A human capital approach was applied, focusing on the economic burden resulting from premature death and absenteeism. Results: Excess mortality was 4185 per 100 000 cases of appendicitis using approach 1 and 3448 per 100 000 using approach 2. The economic burden of continuing current levels of access and local quality was US $92 492 million using approach 1 and$73 141 million using approach 2. The economic burden of not providing surgical care to the standards of high-income countries was $95 004 million using approach 1 and$75 666 million using approach 2. The largest share of these costs resulted from premature death (97.7 per cent) and lack of access (97.0 per cent) in contrast to lack of quality. Conclusion: For a comparatively non-complex emergency condition such as appendicitis, increasing access to care should be prioritized. Although improving quality of care should not be neglected, increasing provision of care at current standards could reduce societal costs substantially