Geostatistical Evaluation with Drinking Groundwater Quality Index (DGWQI) in Birjand Plain Aquifer

Groundwater is the main source of drinking water in the semi-arid regions of Iran. Therefore, monitoring the quality of this valuable resource is vital. Hence, the purpose of this study was to investigate and prepare a groundwater quality map of Birjand located in the semi-arid region of eastern Iran using GIS-based geostatistical analysis with Drinking Groundwater Quality Index (DGWQI). For this purpose, the collected groundwater quality data of 27 agricultural wells during the years 2014-2019 were used. The results of spatial analysis show that 63% of the aquifer area was in the appropriate quality category, 18% in the poor category, 10% in the very poor category and 9% of the aquifer area was in the non-drinking category. Sensitivity analysis indicated that Mg2+, EC, and TDS parameters with the highest mean change index of 18.98, 20.68 and 19.04 were the most sensitive parameters in calculating DGWQI, respectively. Error evaluation calculated by R2 and RMSE methods on conventional kriging and spherical variogram models showed good performance for spatial analysis of all parameters including DGWQI, Mg2+, EC, and TDS. The DGWQI map shows that the western and southwestern parts of the aquifer do not have good quality conditions for extracting drinking water

Global, regional, and national cancer incidence, mortality, years of life lost, years lived with disability, and disability-Adjusted life-years for 29 cancer groups, 1990 to 2017 : A systematic analysis for the global burden of disease study

Importance: Cancer and other noncommunicable diseases (NCDs) are now widely recognized as a threat to global development. The latest United Nations high-level meeting on NCDs reaffirmed this observation and also highlighted the slow progress in meeting the 2011 Political Declaration on the Prevention and Control of Noncommunicable Diseases and the third Sustainable Development Goal. Lack of situational analyses, priority setting, and budgeting have been identified as major obstacles in achieving these goals. All of these have in common that they require information on the local cancer epidemiology. The Global Burden of Disease (GBD) study is uniquely poised to provide these crucial data. Objective: To describe cancer burden for 29 cancer groups in 195 countries from 1990 through 2017 to provide data needed for cancer control planning. Evidence Review: We used the GBD study estimation methods to describe cancer incidence, mortality, years lived with disability, years of life lost, and disability-Adjusted life-years (DALYs). Results are presented at the national level as well as by Socio-demographic Index (SDI), a composite indicator of income, educational attainment, and total fertility rate. We also analyzed the influence of the epidemiological vs the demographic transition on cancer incidence. Findings: In 2017, there were 24.5 million incident cancer cases worldwide (16.8 million without nonmelanoma skin cancer [NMSC]) and 9.6 million cancer deaths. The majority of cancer DALYs came from years of life lost (97%), and only 3% came from years lived with disability. The odds of developing cancer were the lowest in the low SDI quintile (1 in 7) and the highest in the high SDI quintile (1 in 2) for both sexes. In 2017, the most common incident cancers in men were NMSC (4.3 million incident cases); tracheal, bronchus, and lung (TBL) cancer (1.5 million incident cases); and prostate cancer (1.3 million incident cases). The most common causes of cancer deaths and DALYs for men were TBL cancer (1.3 million deaths and 28.4 million DALYs), liver cancer (572000 deaths and 15.2 million DALYs), and stomach cancer (542000 deaths and 12.2 million DALYs). For women in 2017, the most common incident cancers were NMSC (3.3 million incident cases), breast cancer (1.9 million incident cases), and colorectal cancer (819000 incident cases). The leading causes of cancer deaths and DALYs for women were breast cancer (601000 deaths and 17.4 million DALYs), TBL cancer (596000 deaths and 12.6 million DALYs), and colorectal cancer (414000 deaths and 8.3 million DALYs). Conclusions and Relevance: The national epidemiological profiles of cancer burden in the GBD study show large heterogeneities, which are a reflection of different exposures to risk factors, economic settings, lifestyles, and access to care and screening. The GBD study can be used by policy makers and other stakeholders to develop and improve national and local cancer control in order to achieve the global targets and improve equity in cancer care. © 2019 American Medical Association. All rights reserved.Peer reviewe

Chemical enhanced oil recovery and the dilemma of more and cleaner energy

A method based on the concept of exergy-return on exergy-investment is developed to determine the energy efficiency and CO2 intensity of polymer and surfactant enhanced oil recovery techniques. Exergy is the useful work obtained from a system at a given thermodynamics state. The main exergy investment in oil recovery by water injection is related to the circulation of water required to produce oil. At water cuts (water fraction in the total liquid produced) greater than 90%, more than 70% of the total invested energy is spent on injection and lift pumps, resulting in large CO2 intensity for the produced oil. It is shown that injection of polymer with or without surfactant can considerably reduce CO2 intensity of the mature waterflood projects by decreasing the volume of produced water and the exergy investment associated with its circulation. In the field examples considered in this paper, a barrel of oil produced by injection of polymer has 2–5 times less CO2 intensity compared to the baseline waterflood oil. Due to large manufacturing exergy of the synthetic polymers and surfactants, in some cases, the unit exergy investment for production of oil could be larger than that of the waterflooding. It is asserted that polymer injection into reservoirs with large water cut can be a solution for two major challenges of the energy transition period: (1) meet the global energy demand via an increase in oil recovery and (2) reduce the CO2 intensity of oil production (more and cleaner energy).</p

Chemical enhanced oil recovery and the dilemma of more and cleaner energy

Abstract A method based on the concept of exergy-return on exergy-investment is developed to determine the energy efficiency and CO2 intensity of polymer and surfactant enhanced oil recovery techniques. Exergy is the useful work obtained from a system at a given thermodynamics state. The main exergy investment in oil recovery by water injection is related to the circulation of water required to produce oil. At water cuts (water fraction in the total liquid produced) greater than 90%, more than 70% of the total invested energy is spent on injection and lift pumps, resulting in large CO2 intensity for the produced oil. It is shown that injection of polymer with or without surfactant can considerably reduce CO2 intensity of the mature waterflood projects by decreasing the volume of produced water and the exergy investment associated with its circulation. In the field examples considered in this paper, a barrel of oil produced by injection of polymer has 2–5 times less CO2 intensity compared to the baseline waterflood oil. Due to large manufacturing exergy of the synthetic polymers and surfactants, in some cases, the unit exergy investment for production of oil could be larger than that of the waterflooding. It is asserted that polymer injection into reservoirs with large water cut can be a solution for two major challenges of the energy transition period: (1) meet the global energy demand via an increase in oil recovery and (2) reduce the CO2 intensity of oil production (more and cleaner energy)

Chemical enhanced oil recovery and the dilemma of more and cleaner energy

A method based on the concept of exergy-return on exergy-investment is developed to determine the energy efficiency and CO2 intensity of polymer and surfactant enhanced oil recovery techniques. Exergy is the useful work obtained from a system at a given thermodynamics state. The main exergy investment in oil recovery by water injection is related to the circulation of water required to produce oil. At water cuts (water fraction in the total liquid produced) greater than 90%, more than 70% of the total invested energy is spent on injection and lift pumps, resulting in large CO2 intensity for the produced oil. It is shown that injection of polymer with or without surfactant can considerably reduce CO2 intensity of the mature waterflood projects by decreasing the volume of produced water and the exergy investment associated with its circulation. In the field examples considered in this paper, a barrel of oil produced by injection of polymer has 2–5 times less CO2 intensity compared to the baseline waterflood oil. Due to large manufacturing exergy of the synthetic polymers and surfactants, in some cases, the unit exergy investment for production of oil could be larger than that of the waterflooding. It is asserted that polymer injection into reservoirs with large water cut can be a solution for two major challenges of the energy transition period: (1) meet the global energy demand via an increase in oil recovery and (2) reduce the CO2 intensity of oil production (more and cleaner energy).Petroleum Engineerin

Characterization of Octa-aminopropyl polyhedral oligomeric silsesquioxanes (OA-POSS) nanoparticles and their effect on sweet basil (Ocimum basilicum L.) response to salinity stress

Salt stress is of the most detrimental abiotic stress factors on either crop or non-crop species. Of the strategies employed to boost the performance of the plants against harmful impacts of salt stress; application of novel nano-engineered particles have recently gained great attention as a promising tool. Octa-aminopropyl polyhedral oligomeric silsesquioxanes nanoparticles (OA-POSS NPs) were synthesized and then a foliar-application of OA-POSS NPs were carried out on sweet basil plants subjected to the salt stress. In that context, interactive effects of OA-POSS NPs (25, 50 and 100 mg L-1) and salinity stress (50 and 100 mM NaCl) were assayed by estimating a series of agronomic, physiological, biochemical and analytical parameters. OA-POSS NPs decreased the harmful effects of salinity by increasing photosynthetic pigment content, adjusting chlorophyll fluorescence, and triggering non-enzymatic (phenolic content) and enzymatic antioxidant components. The findings suggested that 25 mg L-1 OA-POSS NPs is the optimum concentration for sweet basil grown under salt stress. Considering the essential oil profile, estragole was the predominant compound with a percentage higher than 50% depending on the treatment. In comparison to the control group, 50 mM NaCl did not significantly affect estragole content, whilst 100 mM NaCl caused a substantial increase in estragole content. Regarding OA-POSS NPs treatments, increments by 16.8%, 11.8% and 17.5% were observed following application with 25, 50 and 100 mg L-1, respectively. Taken together, the current study provides evidence that POSS NPs can be employed as novel, 'green' growth promoting agents in combating salt stress in sweet basil

Direct visualization of pre-protamine 2 detects protamine assembly failures and predicts ICSI success

Abstract Histone-to-protamine transition is an essential step in the generation of fully functional spermatozoa in various mammalian species. In human and mouse, one of the two protamine-encoding genes produces a precursor pre-protamine 2 (pre-PRM2) protein, which is then processed and assembled. Here, we design an original approach based on the generation of pre-PRM2-specific antibodies to visualize the unprocessed pre-PRM2 by microscopy, flow cytometry and immunoblotting. Using mouse models with characterized failures in histone-to-protamine replacement, we show that pre-PRM2 retention is tightly linked to impaired nucleosome disassembly. Additionally, in elongating/condensing spermatids, we observe that pre-PRM2 and transition protein are co-expressed spatiotemporally, and their physical interaction suggests that these proteins act simultaneously rather than successively during histone replacement. By using our anti-human pre-PRM2 antibody, we also measured pre-PRM2 retention rates in the spermatozoa from 49 men of a series of infertile couples undergoing ICSI, which shed new light on the debated relation between pre-PRM2 retention and sperm parameters. Finally, by monitoring 2-pronuclei embryo formation following ICSI, we evaluated the fertilization ability of the sperm in these 49 patients. Our results suggest that the extent of pre-PRM2 retention in sperm, rather than pre-PRM2 accumulation per se, is associated with fertilization failure. Hence, anti-pre-PRM2 antibodies are valuable tools that could be used in routine monitoring of sperm parameters in fertility clinics, as well as in experimental research programmes to better understand the obscure process of histone-to-protamine transition