1,783 research outputs found
Optimizing the Reduction of Total Suspended Solids in Pump Water from Fish Factories Through Electrocoagulation using Response Surface Methodology
This study aims to optimize the removal of total suspended solids (TSS) in pump water from fish flour factories through electrocoagulation technology and to determine the effects of the main operation parameters. Pump water has high conductivity (40.1 mS), due to the presence of dissolved salts and contains high concentration of organic substances (12,360 mg/L of TSS and 520 mg/L of fats). In this study, pump water was treated in an electrocoagulation reactor with aluminum electrodes using Response Surface Methodology with a 3kfactorial design based on two factors, current intensity (I) of 8–13 A and treatment time (t) of 20–40 minutes. The percentage of TSS removed from the water was used as the response variable. The results revealed that I and t significantly (p < 0.05) influenced the process. In accordance, the optimal operational parameters for TSS removal were I = 13 A and t = 30 minutes. Using these conditions, TSS removal efficiency of 99.9% was achieved. The sewage sludge generated with these optimal process conditions indicated 19.3% of ash content, 6.2% of salt, 1.7% of aluminum, 0.3% of iron, 0.4% of potassium, 256 ppm of zinc, and 2.1% of phosphorus. Hence, the results of this study affirm that electrocoagulation can be considered as a solution for marine pollution caused by fishing industries
Self-assembly and magnetic properties of a double-propeller octanuclear copper(II) complex with a meso-helicate-type metallacryptand core
An octanuclear copper(II) complex possessing a dimer-of-tetramers structure self-assembles from a binuclear oxamatocopper(II) metallacryptand of the meso-helicate type; its magnetic behaviour is consistent with its unique double-propeller molecular topology.Pardo Marín, Emilio José, [email protected] ; Julve Olcina, Miguel, [email protected] ; Lloret Pastor, Francisco, [email protected] ; Ruiz Garcia, Rafael, [email protected]
Composición proximal y propiedades funcionales del surimi liofilizado de Dosidicus gigas “calamar gigante”
The purpose of the research was to determinate proximal composition and functional properties of the giant squid freeze-dried surimi (Dosidicus gigas). Surimi elaborated from giant squid and it lyophilized until obtaining surimi powder to evaluate its characteristics and functional properties. The protein content was 58.7% and carbohydrate 30.5%. Protein solubility in water and salt (3%) were 21.1% and 40.6% respectively, these values being higher than surimi powder of commercial species. The gelling capacity was 2.4% and the emulsifying capacity was 79.9% at a concentration of 1.0%. The color on the Hunter scale was L*: 91.5; a*: 0.5; b*: 7.0. Giant squid powder surimi considered as a functional protein powder due to its percentage protein content, and had good technological characteristics and great potential in the food industry.El propósito de la investigación fue determinar la composición proximal y propiedades funcionales del surimi liofilizado de calamar gigante (Dosidicus gigas). Se elaboró surimi a partir de calamar gigante y fue liofilizado hasta obtener surimi en polvo para evaluar sus características y propiedades funcionales. El contenido de proteínas fue 58,7% y carbohidratos 30,5%. La solubilidad proteica en agua y sal (3%) fueron 21,1% y 40,6% respectivamente, siendo estos valores superiores a surimi en polvo de especies comerciales. La capacidad de gelificación fue 2,4% y la capacidad emulsificante fue 79,9% a una concentración del 1,0%. El color en la escala de Hunter fue L*: 91,5; a*: 0,5; b*:7,0. El surimi en polvo de calamar gigante fue considerado como un polvo proteico funcional debido a su contenido porcentual proteico, y tuvieron buenas características tecnológicas y de gran potencial en la industria alimentaria
Minimally important difference of the Treatment Satisfaction with Medicines Questionnaire (SATMED-Q)
Identification of GSK3186899/DDD853651 as a Preclinical Development Candidate for the Treatment of Visceral Leishmaniasis
The leishmaniases are diseases that
affect millions of people across
the world, in particular visceral leishmaniasis (VL) which is fatal
unless treated. Current standard of care for VL suffers from multiple
issues and there is a limited pipeline of new candidate drugs. As
such, there is a clear unmet medical need to identify new treatments.
This paper describes the optimization of a phenotypic hit against Leishmania donovani, the major causative organism
of VL. The key challenges were to balance solubility and metabolic
stability while maintaining potency. Herein, strategies to address
these shortcomings and enhance efficacy are discussed, culminating
in the discovery of preclinical development candidate GSK3186899/DDD853651
(<b>1</b>) for VL
Les droits disciplinaires des fonctions publiques : « unification », « harmonisation » ou « distanciation ». A propos de la loi du 26 avril 2016 relative à la déontologie et aux droits et obligations des fonctionnaires
The production of tt‾ , W+bb‾ and W+cc‾ is studied in the forward region of proton–proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98±0.02 fb−1 . The W bosons are reconstructed in the decays W→ℓν , where ℓ denotes muon or electron, while the b and c quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions.The production of , and is studied in the forward region of proton-proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98 0.02 \mbox{fb}^{-1}. The bosons are reconstructed in the decays , where denotes muon or electron, while the and quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions
Study of the decay
The decay is studied
in proton-proton collisions at a center-of-mass energy of TeV
using data corresponding to an integrated luminosity of 5
collected by the LHCb experiment. In the system, the
state observed at the BaBar and Belle experiments is
resolved into two narrower states, and ,
whose masses and widths are measured to be where the first uncertainties are statistical and the second
systematic. The results are consistent with a previous LHCb measurement using a
prompt sample. Evidence of a new
state is found with a local significance of , whose mass and width
are measured to be and , respectively. In addition, evidence of a new decay mode
is found with a significance of
. The relative branching fraction of with respect to the
decay is measured to be , where the first
uncertainty is statistical, the second systematic and the third originates from
the branching fractions of charm hadron decays.Comment: All figures and tables, along with any supplementary material and
additional information, are available at
https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-028.html (LHCb
public pages
Measurement of the ratios of branching fractions and
The ratios of branching fractions
and are measured, assuming isospin symmetry, using a
sample of proton-proton collision data corresponding to 3.0 fb of
integrated luminosity recorded by the LHCb experiment during 2011 and 2012. The
tau lepton is identified in the decay mode
. The measured values are
and
, where the first uncertainty is
statistical and the second is systematic. The correlation between these
measurements is . Results are consistent with the current average
of these quantities and are at a combined 1.9 standard deviations from the
predictions based on lepton flavor universality in the Standard Model.Comment: All figures and tables, along with any supplementary material and
additional information, are available at
https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-039.html (LHCb
public pages
Multidifferential study of identified charged hadron distributions in -tagged jets in proton-proton collisions at 13 TeV
Jet fragmentation functions are measured for the first time in proton-proton
collisions for charged pions, kaons, and protons within jets recoiling against
a boson. The charged-hadron distributions are studied longitudinally and
transversely to the jet direction for jets with transverse momentum 20 GeV and in the pseudorapidity range . The
data sample was collected with the LHCb experiment at a center-of-mass energy
of 13 TeV, corresponding to an integrated luminosity of 1.64 fb. Triple
differential distributions as a function of the hadron longitudinal momentum
fraction, hadron transverse momentum, and jet transverse momentum are also
measured for the first time. This helps constrain transverse-momentum-dependent
fragmentation functions. Differences in the shapes and magnitudes of the
measured distributions for the different hadron species provide insights into
the hadronization process for jets predominantly initiated by light quarks.Comment: All figures and tables, along with machine-readable versions and any
supplementary material and additional information, are available at
https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-013.html (LHCb
public pages
The Fourteenth Data Release of the Sloan Digital Sky Survey: First Spectroscopic Data from the Extended Baryon Oscillation Spectroscopic Survey and from the Second Phase of the Apache Point Observatory Galactic Evolution Experiment
The fourth generation of the Sloan Digital Sky Survey (SDSS-IV) has been in operation since 2014 July. This paper describes the second data release from this phase, and the 14th from SDSS overall (making this Data Release Fourteen or DR14). This release makes the data taken by SDSS-IV in its first two years of operation (2014–2016 July) public. Like all previous SDSS releases, DR14 is cumulative, including the most recent reductions and calibrations of all data taken by SDSS since the first phase began operations in 2000. New in DR14 is the first public release of data from the extended Baryon Oscillation Spectroscopic Survey; the first data from the second phase of the Apache Point Observatory (APO) Galactic Evolution Experiment (APOGEE-2), including stellar parameter estimates from an innovative data-driven machine-learning algorithm known as "The Cannon"; and almost twice as many data cubes from the Mapping Nearby Galaxies at APO (MaNGA) survey as were in the previous release (N = 2812 in total). This paper describes the location and format of the publicly available data from the SDSS-IV surveys. We provide references to the important technical papers describing how these data have been taken (both targeting and observation details) and processed for scientific use. The SDSS web site (www.sdss.org) has been updated for this release and provides links to data downloads, as well as tutorials and examples of data use. SDSS-IV is planning to continue to collect astronomical data until 2020 and will be followed by SDSS-V
- …