COMBINED EFFECTS OF ELECTROSTATIC AND ELECTROMAGNETIC INTERFERENCES OF HIGH VOLTAGE OVERHEAD POWER LINES ON AERIAL METALLIC PIPELINE

The main purpose of this paper is to model and analyze the electrostatic and electromagnetic interferences between a HV overhead power line and an aerial metallic pipeline situated parallel at a close distance. The modelling of these interferences is typically done for safety reasons, to ensure that the induced voltage does not pose any risk to the operating and maintenance personnel and to the integrity of the pipeline. The adopted methodologies respectively for electrostatic and electromagnetic interferences are based on the charge and current simulation methods combined with the Teaching learning based optimization (TLBO) algorithm. The Friedman test  analysis indicate that teaching learning based optimization (TLBO) algorithm can be used for parameters optimization, it showed better results. In the case where the induced currents and voltages values exceed the limit authorized values by the international CIGRE standard, mitigation measures become necessary. The simulation results obtained were compared with those provided respectively by the admittance matrix analysis and Carson's method, good agreement was obtained

Far-Field DOA Estimation of Uncorrelated RADAR Signals through Coprime Arrays in Low SNR Regime by Implementing Cuckoo Search Algorithm

For the purpose of attaining a high degree of freedom (DOF) for the direction of arrival (DOA) estimations in radar technology, coprime sensor arrays (CSAs) are evaluated in this paper. In addition, the global and local minima of extremely non-linear functions are investigated, aiming to improve DOF. The optimization features of the cuckoo search (CS) algorithm are utilized for DOA estimation of far-field sources in a low signal-to-noise ratio (SNR) environment. The analytical approach of the proposed CSAs, CS and global and local minima in terms of cumulative distribution function (CDF), fitness function and SNR for DOA accuracy are presented. The parameters like root mean square error (RMSE) for frequency distribution, RMSE variability analysis, estimation accuracy, RMSE for CDF, robustness against snapshots and noise and RMSE for Monte Carlo simulation runs are explored for proposed model performance estimation. In conclusion, the proposed DOA estimation in radar technology through CS and CSA achievements are contrasted with existing tools such as particle swarm optimization (PSO).This project has received funding from Universidad Carlos III de Madrid and the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant 801538

Advanced Signal Processing Techniques Applied to Power Systems Control and Analysis

The work published in this book is related to the application of advanced signal processing in smart grids, including power quality, data management, stability and economic management in presence of renewable energy sources, energy storage systems, and electric vehicles. The distinct architecture of smart grids has prompted investigations into the use of advanced algorithms combined with signal processing methods to provide optimal results. The presented applications are focused on data management with cloud computing, power quality assessment, photovoltaic power plant control, and electrical vehicle charge stations, all supported by modern AI-based optimization methods

Optimization of non-linear control aerodynamic systems using metaheuristic algorithm Optimisation des commandes non linéaires des systèmes aérodynamiques par les méthodes méta-heuristiques

This thesis is part of the project "modelisation and control dynamic systems" carried by the laboratory of LMSE. This project aims to develop and optimize new control approaches for the UAV quadrotor tracking control. This thesis consisted of the modelling of the quadrotor, and then analysing, designing and implementing new optimal control strategies based on the model-free concept. In this context, the aim of the thesis is to propose new control strategies based on the model-free concept. The proposed strategies help to compensate the disturbances and model uncertainties. Regarding our work, we have proposed different control techniques for quadrotor control. First, an optimal model-free backstepping control law applied to a quadrotor UAV has been proposed. In addition to this work, the dynamic system has been estimated through a new proposed fuzzy strategy and merged with the BC under the model-free concept. Finally, an optimal fuzzy model-free control has been designed based on decentralized fuzzy control. The objective of these control strategies is to achieve the best tracking with unknown nonlinear dynamics and external disturbances. These proposed approaches are validated through analytical and experimental procedures and the effectiveness checked and compared with regard to the related controllers in the presence of disturbances and model uncertainties

Comparative and comprehensive study of linear antenna arrays’ synthesis

In this paper, a comparative and comprehensive study of synthesizing linear antenna array (LAA) designs, is presented. Different desired objectives are considered in this paper; reducing the maximum sidelobe radiation pattern (i.e., pencil-beam pattern), controlling the first null beamwidth (FNBW), and imposing nulls at specific angles in some designs, which are accomplished by optimizing different array parameters (feed current amplitudes, feed current phase, and array elements positions). Three different optimization algorithms are proposed in order to achieve the wanted goals; grasshopper optimization algorithms (GOA), antlion optimization (ALO), and a new hybrid optimization algorithm based on GOA and ALO. The obtained results show the effectiveness and robustness of the proposed algorithms to achieve the wanted targets. In most experiments, the proposed algorithms outperform other well-known optimization methods, such as; Biogeography based optimization (BBO), particle swarm optimization (PSO), firefly algorithm (FA), cuckoo search (CS) algorithm, genetic algorithm (GA), Taguchi method, self-adaptive differential evolution (SADE), modified spider monkey optimization (MSMO), symbiotic organisms search (SOS), enhanced firefly algorithm (EFA), bat flower pollination (BFP) and tabu search (TS) algorithm

Optimized PID Controller of DC-DC Buck Converter based on Archimedes Optimization Algorithm

This research assesses the suitability of the Archimedes Optimization Algorithm (AOA) as a metaheuristic technique to fine-tune a PID controller in a closed-loop DC-DC buck converter. The converter's core function is to regulate output voltage, ensuring stability despite load fluctuations and input voltage changes.  The operational effectiveness of the converter hinges significantly on the gain settings of the PID controller and determining the optimal gain setting for the PID controller is a non-trivial task. For robust performance, the PID controller necessitates optimal gain settings, attainable through metaheuristic optimization. The algorithm aids in identifying ideal proportional, integral, and derivative gains based on varying load conditions. Leveraging the metaheuristic algorithm, the PID controller is optimized to minimize voltage errors, reduce overshoot, and enhance response time. The proposed PID controller, optimized using AOA, is contrasted with PID controllers tuned via alternative algorithms including the hybrid Nelder-Mead method (AEONM), artificial ecosystem-based optimization (AEO), differential evolution (DE), and particle swarm optimizer (PSO). Performance evaluation involves injecting a voltage disturbance into the buck converter with load changes of up to 20%. Results demonstrate the superiority of the AOA-optimized PID controller in voltage recovery.  It demonstrates a faster response time and outstanding voltage regulation performance, while also exhibiting minimal performance degradation during load changes. This study concludes that the AOA optimization algorithm surpasses other methods in tuning the PID controller for closed-loop DC-DC buck converters

Real-Time Implementation of a New MPPT Control Method for a DC-DC Boost Converter Used in a PEM Fuel Cell Power System

settings Open AccessArticle Real-Time Implementation of a New MPPT Control Method for a DC-DC Boost Converter Used in a PEM Fuel Cell Power System by Mohamed Derbeli 1,2,* [OrcID] , Oscar Barambones 1 [OrcID] , Mohammed Yousri Silaa 1 [OrcID] and Cristian Napole 1 [OrcID] 1 Engineering School of Vitoria, University of the Basque Country UPV/EHU, Nieves Cano 12, 1006 Vitoria, Spain 2 National Engineering School of Gabes, University of Gabes, Omar Ibn-Elkhattab, 6029 Gabes, Tunisia * Author to whom correspondence should be addressed. Actuators 2020, 9(4), 105; https://doi.org/10.3390/act9040105 Received: 30 August 2020 / Revised: 25 September 2020 / Accepted: 10 October 2020 / Published: 16 October 2020 (This article belongs to the Section High Torque/Power Density Actuators) Download PDF Browse Figures Abstract Polymer electrolyte membrane (PEM) fuel cells demonstrate potential as a comprehensive and general alternative to fossil fuel. They are also considered to be the energy source of the twenty-first century. However, fuel cell systems have non-linear output characteristics because of their input variations, which causes a significant loss in the overall system output. Thus, aiming to optimize their outputs, fuel cells are usually coupled with a controlled electronic actuator (DC-DC boost converter) that offers highly regulated output voltage. High-order sliding mode (HOSM) control has been effectively used for power electronic converters due to its high tracking accuracy, design simplicity, and robustness. Therefore, this paper proposes a novel maximum power point tracking (MPPT) method based on a combination of reference current estimator (RCE) and high-order prescribed convergence law (HO-PCL) for a PEM fuel cell power system. The proposed MPPT method is implemented practically on a hardware 360W FC-42/HLC evaluation kit. The obtained experimental results demonstrate the success of the proposed method in extracting the maximum power from the fuel cell with high tracking performance.This work was partially supported by Eusko Jaurlaritza/Gobierno Vasco [grant number SMAR3NAK ELKARTEK KK-2019/00051]; the Provincial Council of Alava (DFA) [grant number CONAVAUTIN 2] (Collaboration Agreement)

Performance Analysis Of Hybrid Ai-Based Technique For Maximum Power Point Tracking In Solar Energy System Applications

Demand is increasing for a system based on renewable energy sources that can be employed to both fulfill rising electricity needs and mitigate climate change. Solar energy is the most prominent renewable energy option. However, only 30%-40% of the solar irradiance or sunlight intensity is converted into electrical energy by the solar panel system, which is low compared to other sources. This is because the solar power system\u27s output curve for power versus voltage has just one Global Maximum Power Point (GMPP) and several local Maximum Power Points (MPPs). For a long time, substantial research in Artificial Intelligence (AI) has been undertaken to build algorithms that can track the MPP more efficiently to acquire the most output from a Photovoltaic (PV) panel system because traditional Maximum Power Point Tracking (MPPT) techniques such as Incremental Conductance (INC) and Perturb and Observe (P&Q) are unable to track the GMPP under varying weather conditions. Literature (K. Y. Yap et al., 2020) has shown that most AIbased MPPT algorithms have a faster convergence time, reduced steady-state oscillation, and higher efficiency but need a lot of processing and are expensive to implement. However, hybrid MPPT has been shown to have a good performance-to-complexity ratio. It incorporates the benefits of traditional and AI-based MPPT methodologies but choosing the appropriate hybrid MPPT techniques is still a challenge since each has advantages and disadvantages. In this research work, we proposed a suitable hybrid AI-based MPPT technique that exhibited the right balance between performance and complexity when utilizing AI in MPPT for solar power system optimization. To achieve this, we looked at the basic concept of maximum power point tracking and compared some AI-based MPPT algorithms for GMPP estimation. After evaluating and comparing these approaches, the most practical and effective ones were chosen, modeled, and simulated in MATLAB Simulink to demonstrate the method\u27s correctness and dependability in estimating GMPP under various solar irradiation and PV cell temperature values. The AI-based MPPT techniques evaluated include Particle Swarm Optimization (PSO) trained Adaptive Neural Fuzzy Inference System (ANFIS) and PSO trained Neural Network (NN) MPPT. We compared these methods with Genetic Algorithm (GA)-trained ANFIS method. Simulation results demonstrated that the investigated technique could track the GMPP of the PV system and has a faster convergence time and more excellent stability. Lastly, we investigated the suitability of Buck, Boost, and Buck-Boost converter topologies for hybrid AI-based MPPT in solar energy systems under varying solar irradiance and temperature conditions. The simulation results provided valuable insights into the efficiency and performance of the different converter topologies in solar energy systems employing hybrid AI-based MPPT techniques. The Boost converter was identified as the optimal topology based on the results, surpassing the Buck and Buck-Boost converters in terms of efficiency and performance. Keywords—Maximum Power Point Tracking (MPPT), Genetic Algorithm, Adaptive Neural-Fuzzy Interference System (ANFIS), Particle Swarm Optimization (PSO