FPGA realisation of inverse kinematics for biped robot based on CORDIC

[[abstract]]An FPGA realisation structure based on CORDIC is proposed to implement inverse kinematics for a biped robot. First, the angle equations of inverse kinematics for the biped robot are described. Based on these equations represented by the inverse tangent function, the FPGA structure based on two CORDIC operators of circular vectoring and hyperbolic vectoring is proposed and implemented on an FPGA chip. Finally, the comparison of the proposed FPGA realisation and the software realisation to calculate these angle equations is presented to illustrate the effectiveness of the proposed structure.[[notice]]補正完

FPGA-Based Fused Smart Sensor for Dynamic and Vibration Parameter Extraction in Industrial Robot Links

Intelligent robotics demands the integration of smart sensors that allow the controller to efficiently measure physical quantities. Industrial manipulator robots require a constant monitoring of several parameters such as motion dynamics, inclination, and vibration. This work presents a novel smart sensor to estimate motion dynamics, inclination, and vibration parameters on industrial manipulator robot links based on two primary sensors: an encoder and a triaxial accelerometer. The proposed smart sensor implements a new methodology based on an oversampling technique, averaging decimation filters, FIR filters, finite differences and linear interpolation to estimate the interest parameters, which are computed online utilizing digital hardware signal processing based on field programmable gate arrays (FPGA)

A study of FPGA-based System-on-Chip designs for real-time industrial application

This paper shows the benefits of the Field Programming Gate Array (FPGAs) in industrial control applications. The author starts by addressing the benefits of FPGA and where it is useful. As well as, the author has done some FPGA’s evaluation researches on the FPGA performing explaining the performance of the FPGA and the design tools. To show the benefits of the FPGA, an industrial application example has been used. The application is a real-time face detection and tracking using FPGA. Face tracking will depend on calculating the centroid of each detected region. A DE2-SoC Altera board has been used to implement this application. The application based on few algorithms that filter the captured images to detect them. These algorithms have been translated to a Verilog code to run it on the DE2-SoC boar

Efficient and Accurate CORDIC Pipelined Architecture Chip Design Based on Binomial Approximation for Biped Robot

Recently, much research has focused on the design of biped robots with stable and smooth walking ability, identical to human beings, and thus, in the coming years, biped robots will accomplish rescue or exploration tasks in challenging environments. To achieve this goal, one of the important problems is to design a chip for real-time calculation of moving length and rotation angle of the biped robot. This paper presents an efficient and accurate coordinate rotation digital computer (CORDIC)-based efficient chip design to calculate the moving length and rotation angle for each step of the biped robot. In a previous work, the hardware cost of the accurate CORDIC-based algorithm of biped robots was primarily limited by the scale-factor architecture. To solve this problem, a binomial approximation was carefully employed for computing the scale-factor. In doing so, the CORDIC-based architecture can achieve similar accuracy but with fewer iterations, thus reducing hardware cost. Hence, incorporating CORDIC-based architecture with binomial approximation, pipelined architecture, and hardware sharing machines, this paper proposes a novel efficient and accurate CORDIC-based chip design by using an iterative pipelining architecture for biped robots. In this design, only low-complexity shift and add operators were used for realizing efficient hardware architecture and achieving the real-time computation of lengths and angles for biped robots. Compared with current designs, this work reduced hardware cost by 7.2%, decreased average errors by 94.5%, and improved average executing performance by 31.5%, when computing ten angles of biped robots

Control visual dinámico basado en FPGA de un robot manipulador de 6 grados de libertad

[Resumen] En este artículo se describe la formulación, implementación y experimentación de un sistema de control visual dinámico aplicado a un robot de 6 grados de libertad. Se propone una arquitectura hardware basada en FPGAs para la implementación de los controladores. Con el objetivo de limitar la latencia del controlador se ha implementado en la FPGA no sólo el controlador sino también la captura y procesamiento de la información visual. Se hace uso de las capacidades de procesamiento paralelo de la FPGA para optimizar los diferentes componentes del sistema de control visual propuesto. Finaliza el artículo con los resultados experimentales obtenidos en tareas de posicionamiento de un robot Mitsubishi PA10 de 6 grados de libertad.Este trabajo ha sido financiado por el Ministerio de Economía y competitividad mediante el proyecto DPI2015-68087-Rhttps://doi.org/10.17979/spudc.978849749808

Fused Smart Sensor Network for Multi-Axis Forward Kinematics Estimation in Industrial Robots

Flexible manipulator robots have a wide industrial application. Robot performance requires sensing its position and orientation adequately, known as forward kinematics. Commercially available, motion controllers use high-resolution optical encoders to sense the position of each joint which cannot detect some mechanical deformations that decrease the accuracy of the robot position and orientation. To overcome those problems, several sensor fusion methods have been proposed but at expenses of high-computational load, which avoids the online measurement of the joint’s angular position and the online forward kinematics estimation. The contribution of this work is to propose a fused smart sensor network to estimate the forward kinematics of an industrial robot. The developed smart processor uses Kalman filters to filter and to fuse the information of the sensor network. Two primary sensors are used: an optical encoder, and a 3-axis accelerometer. In order to obtain the position and orientation of each joint online a field-programmable gate array (FPGA) is used in the hardware implementation taking advantage of the parallel computation capabilities and reconfigurability of this device. With the aim of evaluating the smart sensor network performance, three real-operation-oriented paths are executed and monitored in a 6-degree of freedom robot

FPGA-based High-Performance Collision Detection: An Enabling Technique for Image-Guided Robotic Surgery

Collision detection, which refers to the computational problem of finding the relative placement or con-figuration of two or more objects, is an essential component of many applications in computer graphics and robotics. In image-guided robotic surgery, real-time collision detection is critical for preserving healthy anatomical structures during the surgical procedure. However, the computational complexity of the problem usually results in algorithms that operate at low speed. In this paper, we present a fast and accurate algorithm for collision detection between Oriented-Bounding-Boxes (OBBs) that is suitable for real-time implementation. Our proposed Sweep and Prune algorithm can perform a preliminary filtering to reduce the number of objects that need to be tested by the classical Separating Axis Test algorithm, while the OBB pairs of interest are preserved. These OBB pairs are re-checked by the Separating Axis Test algorithm to obtain accurate overlapping status between them. To accelerate the execution, our Sweep and Prune algorithm is tailor-made for the proposed method. Meanwhile, a high performance scalable hardware architecture is proposed by analyzing the intrinsic parallelism of our algorithm, and is implemented on FPGA platform. Results show that our hardware design on the FPGA platform can achieve around 8X higher running speed than the software design on a CPU platform. As a result, the proposed algorithm can achieve a collision frame rate of 1 KHz, and fulfill the requirement for the medical surgery scenario of Robot Assisted Laparoscopy.published_or_final_versio

FPGAs in Industrial Control Applications

The aim of this paper is to review the state-of-the-art of Field Programmable Gate Array (FPGA) technologies and their contribution to industrial control applications. Authors start by addressing various research fields which can exploit the advantages of FPGAs. The features of these devices are then presented, followed by their corresponding design tools. To illustrate the benefits of using FPGAs in the case of complex control applications, a sensorless motor controller has been treated. This controller is based on the Extended Kalman Filter. Its development has been made according to a dedicated design methodology, which is also discussed. The use of FPGAs to implement artificial intelligence-based industrial controllers is then briefly reviewed. The final section presents two short case studies of Neural Network control systems designs targeting FPGAs

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria