On thermal sensor calibration and software techniques for many-core thermal management

The high power density of a many-core processor results in increased temperature which negatively impacts system reliability and performance. Dynamic thermal management applies thermal-aware techniques at run time to avoid overheating using temperature information collected from on-chip thermal sensors. Temperature sensing and thermal control schemes are two critical technologies for successfully maintaining thermal safety. In this dissertation, on-line thermal sensor calibration schemes are developed to provide accurate temperature information. Software-based dynamic thermal management techniques are proposed using calibrated thermal sensors. Due to process variation and silicon aging, on-chip thermal sensors require periodic calibration before use in DTM. However, the calibration cost for thermal sensors can be prohibitively high as the number of on-chip sensors increases. Linear models which are suitable for on-line calculation are employed to estimate temperatures at multiple sensor locations using performance counters. The estimated temperature and the actual sensor thermal profile show a very high similarity with correlation coefficient ~0.9 for SPLASH2 and SPEC2000 benchmarks. A calibration approach is proposed to combine potentially inaccurate temperature values obtained from two sources: thermal sensor readings and temperature estimations. A data fusion strategy based on Bayesian inference, which combines information from these two sources, is demonstrated. The result shows the strategy can effectively recalibrate sensor readings in response to inaccuracies caused by process variation and environmental noise. The average absolute error of the corrected sensor temperature readings is A dynamic task allocation strategy is proposed to address localized overheating in many-core systems. Our approach employs reinforcement learning, a dynamic machine learning algorithm that performs task allocation based on current temperatures and a prediction regarding which assignment will minimize the peak temperature. Our results show that the proposed technique is fast (scheduling performed in \u3c1 \u3ems) and can efficiently reduce peak temperature by up to 8 degree C in a 49-core processor (6% on average) versus a leading competing task allocation approach for a series of SPLASH-2 benchmarks. Reinforcement learning has also been applied to 3D integrated circuits to allocate tasks with thermal awareness

Approaches to multiprocessor error recovery using an on-chip interconnect subsystem

For future multicores, a dedicated interconnect subsystem for on-chip monitors was found to be highly beneficial in terms of scalability, performance and area. In this thesis, such a monitor network (MNoC) is used for multicores to support selective error identification and recovery and maintain target chip reliability in the context of dynamic voltage and frequency scaling (DVFS). A selective shared memory multiprocessor recovery is performed using MNoC in which, when an error is detected, only the group of processors sharing an application with the affected processors are recovered. Although the use of DVFS in contemporary multicores provides significant protection from unpredictable thermal events, a potential side effect can be an increased processor exposure to soft errors. To address this issue, a flexible fault prevention and recovery mechanism has been developed to selectively enable a small amount of per-core dual modular redundancy (DMR) in response to increased vulnerability, as measured by the processor architectural vulnerability factor (AVF). Our new algorithm for DMR deployment aims to provide a stable effective soft error rate (SER) by using DMR in response to DVFS caused by thermal events. The algorithm is implemented in real-time on the multicore using MNoC and controller which evaluates thermal information and multicore performance statistics in addition to error information. DVFS experiments with a multicore simulator using standard benchmarks show an average 6% improvement in overall power consumption and a stable SER by using selective DMR versus continuous DMR deployment

Aerospace Sensor Systems: From Sensor Development To Vehicle Application

This paper presents an overview of years of sensor system development and application for aerospace systems. The emphasis of this work is on developing advanced capabilities for measurement and control of aeropropulsion and crew vehicle systems as well as monitoring the safety of those systems. Specific areas of work include chemical species sensors, thin film thermocouples and strain gages, heat flux gages, fuel gages, SiC based electronic devices and sensors, space qualified electronics, and MicroElectroMechanical Systems (MEMS) as well as integrated and multifunctional sensor systems. Each sensor type has its own technical challenges related to integration and reliability in a given application. The general approach has been to develop base sensor technology using microfabrication techniques, integrate sensors with "smart" hardware and software, and demonstrate those systems in a range of aerospace applications. Descriptions of the sensor elements, their integration into sensors systems, and examples of sensor system applications will be discussed. Finally, suggestions related to the future of sensor technology will be given. It is concluded that smart micro/nano sensor technology can revolutionize aerospace applications, but significant challenges exist in maturing the technology and demonstrating its value in real-life applications

R&D Paths of Pixel Detectors for Vertex Tracking and Radiation Imaging

This report reviews current trends in the R&D of semiconductor pixellated sensors for vertex tracking and radiation imaging. It identifies requirements of future HEP experiments at colliders, needed technological breakthroughs and highlights the relation to radiation detection and imaging applications in other fields of science.Comment: 17 pages, 2 figures, submitted to the European Strategy Preparatory Grou

Near-optimal thermal monitoring framework for many-core systems on chip

Chip designers place on-chip thermal sensors to measure local temperatures, thus preventing thermal runaway situations in many-core processing architectures. However, the quality of the thermal reconstruction is directly dependent on the number of placed sensors, which should be minimized, while guaranteeing full detection of all the worst case temperature gradient. In this paper, we present an entire framework for the thermal management of complex many-core architectures, such that we can precisely recover the thermal distribution from a minimal number of sensors. The proposed sensor placement algo- rithm is guaranteed to reduce the impact of noisy measurements on the reconstructed thermal distribution. We achieve significant improvements compared to the state of the art, in terms of both computational complexity and reconstruction precision. For example, if we consider a 64 cores SoC with 64 noisy sensors (σ^2 = 4), we achieve an average reconstruction error of 1.5C, that is less than the half of what previous state-of-the-art methods achieve. We also study the practical limits of the proposed method and show that we do not need realistic workloads to learn the model and efficiently place the sensors. In fact, we show that the reconstruction error is not significantly increased if we randomly generate the power-traces of the components or if we have just a part of the correct workload

AirKit: A Citizen-Sensing Toolkit for Monitoring Air Quality.

Increasing urbanisation and a better understanding of the negative health effects of air pollution have accelerated the use of Internet of Things (IoT)-based air quality sensors. Low-cost and low-power sensors are now readily available and commonly deployed by individuals and community groups. However, there are a wide range of such IoT devices in circulation that differently focus on problems of sensor validation, data reliability, or accessibility. In this paper, we present AirKit, which was developed as an integrated and open source "social IoT technology". AirKit enables a comprehensive approach to citizen-sensing air quality through several integrated components: (1) the Dustbox 2.0, a particulate matter sensor; (2) Airsift, a data analysis platform; (3) a reliable and automatic remote firmware update system; (4) a "Data Stories" method and tool for communicating citizen data; and (5) an AirKit logbook that provides a guide for designing and running air quality projects, along with instructions for building and using AirKit components. Developed as a social technology toolkit to foster open processes of research co-creation and environmental action, Airkit has the potential to generate expanded engagements with IoT and air quality by improving the accuracy, legibility and use of sensors, data analysis and data communication.This research was supported by the European Research Council under the European Union’s Seventh Framework Programme (FP/2007–2013)/ERC Grant Agreement n. 313347, “Citizen Sensing and Environmental Practice: Assessing Participatory Engagements with Environments through Sensor Technologies”, and from the European Research Council under the European Union’s Horizon 2020 research and innovation programme (ERC Grant Agreement n. 779921), “AirKit: Citizen Sense Air Monitoring Kit”. The University of Cambridge provided additional support through the ESRC Impact Acceleration Account (2020) for enabling impact

Calibration and performance of the photon sensor response of FACT -- The First G-APD Cherenkov telescope

The First G-APD Cherenkov Telescope (FACT) is the first in-operation test of the performance of silicon photo detectors in Cherenkov Astronomy. For more than two years it is operated on La Palma, Canary Islands (Spain), for the purpose of long-term monitoring of astrophysical sources. For this, the performance of the photo detectors is crucial and therefore has been studied in great detail. Special care has been taken for their temperature and voltage dependence implementing a correction method to keep their properties stable. Several measurements have been carried out to monitor the performance. The measurements and their results are shown, demonstrating the stability of the gain below the percent level. The resulting stability of the whole system is discussed, nicely demonstrating that silicon photo detectors are perfectly suited for the usage in Cherenkov telescopes, especially for long-term monitoring purpose

A design concept for radiation hardened RADFET readout system for space applications

Instruments for measuring the absorbed dose and dose rate under radiation exposure, known as radiation dosimeters, are indispensable in space missions. They are composed of radiation sensors that generate current or voltage response when exposed to ionizing radiation, and processing electronics for computing the absorbed dose and dose rate. Among a wide range of existing radiation sensors, the Radiation Sensitive Field Effect Transistors (RADFETs) have unique advantages for absorbed dose measurement, and a proven record of successful exploitation in space missions. It has been shown that the RADFETs may be also used for the dose rate monitoring. In that regard, we propose a unique design concept that supports the simultaneous operation of a single RADFET as absorbed dose and dose rate monitor. This enables to reduce the cost of implementation, since the need for other types of radiation sensors can be minimized or eliminated. For processing the RADFET's response we propose a readout system composed of analog signal conditioner (ASC) and a self-adaptive multiprocessing system-on-chip (MPSoC). The soft error rate of MPSoC is monitored in real time with embedded sensors, allowing the autonomous switching between three operating modes (high-performance, de-stress and fault-tolerant), according to the application requirements and radiation conditions