207 research outputs found
Existence theorems for a crystal surface model involving the p-Laplace operator
The manufacturing of crystal films lies at the heart of modern
nanotechnology. How to accurately predict the motion of a crystal surface is of
fundamental importance. Many continuum models have been developed for this
purpose, including a number of PDE models, which are often obtained as the
continuum limit of a family of kinetic Monte Carlo models of crystal surface
relaxation that includes both the solid-on-solid and discrete Gaussian models.
In this paper we offer an analytical perspective into some of these models. To
be specific, we study the existence of a weak solution to the boundary value
problem for the equation - \Delta e^{-\mbox{div}\left(|\nabla u|^{p-2}\nabla
u\right)}+au=f, where are given numbers and is a given
function. This problem is derived from a crystal surface model proposed by
J.L.~Marzuola and J.~Weare (2013 Physical Review, E 88, 032403). The
mathematical challenge is due to the fact that the principal term in our
equation is an exponential function of a p-Laplacian. Existence of a
suitably-defined weak solution is established under the assumptions that
, and . Our investigations reveal that the
key to our existence assertion is how to control the set where
-\mbox{div}\left(|\nabla u|^{p-2}\nabla u\right) is
Purchase Intention of Made-in-China Medical Devices among Malaysians: Does COO Effect Work?
Made-in-China products are getting popular around the world. Overcoming the ‘low quality’ perception or unfavorable country of origin (COO) effect is imperative not only for China marketers but also for any related business in other markets. Despite their huge popularity, understanding of market responses and perceptions towards China products remain unclear, especially in the technology-advanced healthcare sector. Based on the Theory of Reasoned Action (TRA) and COO effect, this study examined how subjective norms, self-image congruence and stereotype affected Malaysian consumers’ attitude and purchase intention of Made-in-China medical devices. 200 questionnaires in total were distributed among buyers in Malaysian public and private hospitals. A total of 178 valid responses were collected adopting purposive sampling technique. Findings indicated a significant impact of consumer attitude on purchase intention and attitude was found to be driven by subjective norms and stereotypes (warmth and competence), but not self-image congruency. The study also showed significant mediating effects of consumer attitude on the relationship between subjective norms and stereotype (competence) on purchase intention. The findings provide valuable insights to assist marketers in tapping into the Made-in-China medical device market as well as helping healthcare agencies plan and implement effective policy and marketing communication strategies
Purchase Intention of Made-in-China Medical Devices among Malaysians: Does COO Effect Work?
Made-in-China products are getting popular around the world. Overcoming the ‘low quality’ perception or unfavorable country of origin (COO) effect is imperative not only for China marketers but also for any related business in other markets. Despite their huge popularity, understanding of market responses and perceptions towards China products remain unclear, especially in the technology-advanced healthcare sector. Based on the Theory of Reasoned Action (TRA) and COO effect, this study examined how subjective norms, self-image congruence and stereotype affected Malaysian consumers’ attitude and purchase intention of Made-in-China medical devices. 200 questionnaires in total were distributed among buyers in Malaysian public and private hospitals. A total of 178 valid responses were collected adopting purposive sampling technique. Findings indicated a significant impact of consumer attitude on purchase intention and attitude was found to be driven by subjective norms and stereotypes (warmth and competence), but not self-image congruency. The study also showed significant mediating effects of consumer attitude on the relationship between subjective norms and stereotype (competence) on purchase intention. The findings provide valuable insights to assist marketers in tapping into the Made-in-China medical device market as well as helping healthcare agencies plan and implement effective policy and marketing communication strategies.
Optimization of sintering process on Li1+xAlxTi2-x(PO4)3 solid electrolytes for all-solid-state lithium-ion batteries
In this study, a NASICON-structured Li1.3Al0.3Ti1.7(PO4)3 (LATP) powder is prepared by hydrothermal methods followed by calcination, cold pressing and post-sintering processes. The white, solid product is characterized thoroughly using powder X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM) equipped with Energy Dispersive X-ray Spectroscopy (EDS). The conductivity of the material is measured by a impedance spectroscopy as a function of temperature. Initially, hydrothermal synthesis yields a material isostructural with the orthorhombic oxyphosphate, LiTiOPO4. EDS analysis shows that the distribution of aluminum throughout this material is uniform. A systematic study is then performed to investigate how altering the sintering parameters (such as powder pre-sintering temperature and pellet sintering temperature) affect the formation of LATP. The structure is determined by Rietveld refinement against XRD data and the effects of sintering temperature on porosity, microstructure and electrical conductivity were resolved. The experimental results show that the optimum pre-sintering and sintering temperatures of LATP powders and pellets respectively are 900 °C and 1100 °C. These conditions produce materials with the highest density (99.07% of theoretical), superior conductivity (grain-, grain boundary- and total lithium-ion conductivities of 6.57 × 10−4, 4.59 × 10−4 and 2.70 × 10−4 S cm−1, respectively) and with an activation energy for Li motion of 0.17 eV
Plasma fatty acids and the risk of metabolic syndrome in ethnic Chinese adults in Taiwan
<p>Abstract</p> <p>Background</p> <p>Evidence of predictive power of various fatty acids on the risk of metabolic syndrome was scanty. We evaluated the role of various fatty acids, including saturated fat, monounsaturated fat, transfat, n-6 fatty acid, eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), for the risk of the metabolic syndrome in Taiwan.</p> <p>Results</p> <p>A nested case-control study based on 1000 cases of metabolic syndrome and 1:1 matched control subjects. For saturated fat, monounsaturated fat and transfat, the higher the concentration the higher the risk for metabolic syndrome: participants in the highest quintile had a 2.22-fold (95% confidence interval [CI], 1.66 to 2.97) higher risk of metabolic syndrome. In addition, the participants in higher EPA quintiles were less likely to have the risk of metabolic syndrome (adjusted risk, 0.46 [0.34 to 0.61] for the fifth quintile). Participants in the highest risk group (low EPA and high transfat) had a 2.36-fold higher risk of metabolic syndrome (95% CI, 1.38 to 4.03), compared with those in the lowest risk group (high EPA and low transfat). For prediction power, the area under ROC curves increased from 0.926 in the baseline model to 0.928 after adding fatty acids. The net reclassification improvement for metabolic syndrome risk was substantial for saturated fat (2.1%, <it>P </it>= 0.05).</p> <p>Conclusions</p> <p>Plasma fatty acid components improved the prediction of the metabolic syndrome risk in Taiwan.</p
The prediction of Alzheimer’s disease through multi-trait genetic modeling
To better capture the polygenic architecture of Alzheimer’s disease (AD), we developed a joint genetic score, MetaGRS. We incorporated genetic variants for AD and 24 other traits from two independent cohorts, NACC (n = 3,174, training set) and UPitt (n = 2,053, validation set). One standard deviation increase in the MetaGRS is associated with about 57% increase in the AD risk [hazard ratio (HR) = 1.577, p = 7.17 E-56], showing little difference from the HR for AD GRS alone (HR = 1.579, p = 1.20E-56), suggesting similar utility of both models. We also conducted APOE-stratified analyses to assess the role of the e4 allele on risk prediction. Similar to that of the combined model, our stratified results did not show a considerable improvement of the MetaGRS. Our study showed that the prediction power of the MetaGRS significantly outperformed that of the reference model without any genetic information, but was effectively equivalent to the prediction power of the AD GRS
A Pan-Dengue Virus Reverse Transcription-Insulated Isothermal PCR Assay Intended for Point-of-Need Diagnosis of Dengue Virus Infection by Use of the POCKIT Nucleic Acid Analyzer
Dengue virus (DENV) infection is considered a major public health problem in developing tropical countries where the virus is endemic and continues to cause major disease outbreaks every year. Here, we describe the development of a novel, inexpensive, and user-friendly diagnostic assay based on a reverse transcription-insulated isothermal PCR (RT-iiPCR) method for the detection of all four serotypes of DENV in clinical samples. The diagnostic performance of the newly established pan-DENV RT-iiPCR assay targeting a conserved 3′ untranslated region of the viral genome was evaluated. The limit of detection with a 95% confidence was estimated to be 10 copies of in vitro-transcribed (IVT) RNA. Sensitivity analysis using RNA prepared from 10-fold serial dilutions of tissue culture fluid containing DENVs suggested that the RT-iiPCR assay was comparable to the multiplex real-time quantitative RT-PCR (qRT-PCR) assay for DENV-1, -3, and -4 detection but 10-fold less sensitive for DENV-2 detection. Subsequently, plasma collected from patients suspected of dengue virus infection (n = 220) and individuals not suspected of dengue virus infection (n = 45) were tested by the RT-iiPCR and compared to original test results using a DENV NS1 antigen rapid test and the qRT-PCR. The diagnostic agreement of the pan-DENV RT-iiPCR, NS1 antigen rapid test, and qRT-PCR tests was 93.9%, 84.5%, and 97.4%, respectively, compared to the composite reference results. This new RT-iiPCR assay along with the portable POCKIT nucleic acid analyzer could provide a highly reliable, sensitive, and specific point-of-need diagnostic assay for the diagnosis of DENV in clinics and hospitals in developing countries
Associations of childcare arrangements with adiposity measures in a multi-ethnic Asian cohort : The gusto study
Publisher Copyright: © 2021 by the authors. Licensee MDPI, Basel, Switzerland.Childcare arrangements shape behavioural patterns that influence the risk of childhood obesity. However, little is known of its influence on childhood obesity in Singapore. We aim to examine the associations between childcare arrangements at the age of 5 years and childhood adiposity at age 6 years. Children from the GUSTO study were grouped into three childcare arrangements at age 5: Full-time centre-based childcare (FC), partial centre-based with parental care (PCP), and partial centre-based with non-parents (grandparents and domestic helpers) as caregivers (PCN). Diet, physical activity and sedentary behaviour information were collected at age 5, while anthropometric measurements were collected at age 6. Associations were analysed using multivariable regression models. Among 540 children, those in PCN had higher BMI z-scores (β: 0.34; 95% CI: 0.01, 0.66), greater sum of skinfold thicknesses (mm) (β: 3.75; 95% CI: 0.53, 6.97) and were 3.55 times (95% CI: 1.78, 7.05) more likely to be overweight/obese than those in FC. Adiposity measures in PCP children did not differ from those in FC. PCN children were reported to have more screen time and greater fast-food intake. Children in PCN tended to have higher adiposity measures. Greater engagement of non-parental caregivers should be considered in interventions targeting child obesity.Peer reviewe
The TOP-SCOPE Survey of Planck Galactic Cold Clumps : Survey Overview and Results of an Exemplar Source, PGCC G26.53+0.17
The low dust temperatures (<14 K) of Planck Galactic cold clumps (PGCCs) make them ideal targets to probe the initial conditions and very early phase of star formation. "TOP-SCOPE" is a joint survey program targeting similar to 2000 PGCCs in J = 1-0 transitions of CO isotopologues and similar to 1000 PGCCs in 850 mu m continuum emission. The objective of the "TOP-SCOPE" survey and the joint surveys (SMT 10 m, KVN 21 m, and NRO 45 m) is to statistically study the initial conditions occurring during star formation and the evolution of molecular clouds, across a wide range of environments. The observations, data analysis, and example science cases for these surveys are introduced with an exemplar source, PGCC G26.53+0.17 (G26), which is a filamentary infrared dark cloud (IRDC). The total mass, length, and mean line mass (M/L) of the G26 filament are similar to 6200 M-circle dot, similar to 12 pc, and similar to 500 M-circle dot pc(-1), respectively. Ten massive clumps, including eight starless ones, are found along the filament. The most massive clump as a whole may still be in global collapse, while its denser part seems to be undergoing expansion owing to outflow feedback. The fragmentation in the G26 filament from cloud scale to clump scale is in agreement with gravitational fragmentation of an isothermal, nonmagnetized, and turbulent supported cylinder. A bimodal behavior in dust emissivity spectral index (beta) distribution is found in G26, suggesting grain growth along the filament. The G26 filament may be formed owing to large-scale compression flows evidenced by the temperature and velocity gradients across its natal cloud.Peer reviewe
- …