The CMS Silicon Strip Tracker

The CMS strip tracker is the first large scale tracker entirely based on silicon detectors technology. It consists of 198 m^2 of detector sensitive area instrumenting the inner region of the experiment with a pseudo-rapidity coverage of eta <2.5. This instrument, together with a silicon pixel system, is expected to perform robust tracking and detailed vertex reconstruction while embedded in the LHC high radiation and high luminosity environment. The project is in a well advanced construction phase: the detector module production is completed, the integration of the single components into large sub-detector units is underway and the full tracker commissioning is about to start. In this paper, after a description of the tracker layout, a detector modules production overview and a summary of the integration procedures for the inner barrel part of the tracker will be reported

tracking for proton computed tomography

In hadron therapy a highly conformed irradiation field is delivered to the target by precisely moving the particle beam and, at the same time, modulating its energy with the aim to cover the tumor volume with the requested dose sparing the surrounding healthy tissues as much as possible. To setup a robust treatment plan the Stopping Power (SP) map for each patient should be measured and the volume to be irradiated precisely located. To improve the precision of the SP map determination the use of a proton beam to perform a 'proton Computed Tomography' (pCT) could be the ideal solution. To be effective in reducing the uncertainties in dose spatial distribution, this novel method should keep the SP map spatial resolution below one millimeter. Tracking in presence of large multiple scattering will be discussed in these proceedings together with the concept of 'most likely path' (MLP). A generalization of the studies on this issue will be introduced with the aim to describe instrumental effects on the MLP spatial resolution. The pCT apparatus, based on a Silicon microstrip tracker followed by a calorimeter to measure single protons trajectory and their residual energy, will be reviewed with particular emphasis on the R&D ongoing on this subject and the results already obtained. New prototypes presently under construction, which will be suitable for pre-clinical studies, will be described too

PRIMA+: A proton Computed Tomography apparatus

The proton Computed Tomography (pCT) is a medical imaging method, based on the use of proton beams with kinetic energy of the order of 250 MeV, aimed to directly measure the stopping power distribution of tissues thus improving the present accuracy of treatment planning in hadron therapy. A pCT system should be capable to measure tissue electron density with an accuracy better than 1% and a spatial resolution better than 1 mm. The blurring effect due to multiple Coulomb scattering can be mitigated by single proton tracking technique. As a first step towards pCT the PRIMA+ Collaboration built a prototype capable to carry out a single radiography and a tomographic image of a rotating object. This apparatus includes a silicon microstrip tracker to identify the proton trajectory and a YAG:Ce calorimeter to measure the particle residual energy

La Fanciulla del West

Direcció: Mario ParentiEmpresa: Juan A. PamiasDe cada obra s'ha digitalitzat un programa sencer. De la resta s'han digitalitzat les parts que són diferents

The 2003 Tracker Inner Barrel Beam Test

Before starting the CMS Silicon Strip Tracker (SST) mass production, where the quality control tests can only be done on single components, an extensive collection of activities aiming at validating the tracker system functionality has been performed. In this framework, a final component prototype of the Inner Barrel part (TIB) of the SST has been assembled and tested in the INFN laboratories and then moved to CERN to check its behaviour in a 25~ns LHC-like particle beam. A set of preproduction single-sided silicon microstrip modules was mounted on a mechanical structure very similar to a sector of the third layer of the TIB and read out using a system functionally identical to the final one. In this note the system setup configuration is fully described and the results of the test, concerning both detector performance and system characteristics, are presented and discussed

Study of radiation damage and substrate resistivity effects from beam test of silicon microstrip detectors using LHC readout electronics

We present the beam test results of single-sided silicon microstrip detectors, with different substrate resistivities. The effects of radiation damage are studied for a detector irradiated to a fluence of 2.4 multiplied by 10**1**4 n/cm**2. The detectors are read out with the APV6 chip, which is compatible with the 40 MHz LHC clock. The performance of different detectors and readout modes are studied in terms of signal-to-noise ratio and efficiency

Differential cross section measurements for the production of a W boson in association with jets in proton–proton collisions at √s = 7 TeV

Measurements are reported of differential cross sections for the production of a W boson, which decays into a muon and a neutrino, in association with jets, as a function of several variables, including the transverse momenta (pT) and pseudorapidities of the four leading jets, the scalar sum of jet transverse momenta (HT), and the difference in azimuthal angle between the directions of each jet and the muon. The data sample of pp collisions at a centre-of-mass energy of 7 TeV was collected with the CMS detector at the LHC and corresponds to an integrated luminosity of 5.0 fb[superscript −1]. The measured cross sections are compared to predictions from Monte Carlo generators, MadGraph + pythia and sherpa, and to next-to-leading-order calculations from BlackHat + sherpa. The differential cross sections are found to be in agreement with the predictions, apart from the pT distributions of the leading jets at high pT values, the distributions of the HT at high-HT and low jet multiplicity, and the distribution of the difference in azimuthal angle between the leading jet and the muon at low values.United States. Dept. of EnergyNational Science Foundation (U.S.)Alfred P. Sloan Foundatio

Optimasi Portofolio Resiko Menggunakan Model Markowitz MVO Dikaitkan dengan Keterbatasan Manusia dalam Memprediksi Masa Depan dalam Perspektif Al-Qur`an

Risk portfolio on modern finance has become increasingly technical, requiring the use of sophisticated mathematical tools in both research and practice. Since companies cannot insure themselves completely against risk, as human incompetence in predicting the future precisely that written in Al-Quran surah Luqman verse 34, they have to manage it to yield an optimal portfolio. The objective here is to minimize the variance among all portfolios, or alternatively, to maximize expected return among all portfolios that has at least a certain expected return. Furthermore, this study focuses on optimizing risk portfolio so called Markowitz MVO (Mean-Variance Optimization). Some theoretical frameworks for analysis are arithmetic mean, geometric mean, variance, covariance, linear programming, and quadratic programming. Moreover, finding a minimum variance portfolio produces a convex quadratic programming, that is minimizing the objective function ðð¥with constraintsð ð 𥠥 ðandð´ð¥ = ð. The outcome of this research is the solution of optimal risk portofolio in some investments that could be finished smoothly using MATLAB R2007b software together with its graphic analysis

Penilaian Kinerja Keuangan Koperasi di Kabupaten Pelalawan

This paper describe development and financial performance of cooperative in District Pelalawan among 2007 - 2008. Studies on primary and secondary cooperative in 12 sub-districts. Method in this stady use performance measuring of productivity, efficiency, growth, liquidity, and solvability of cooperative. Productivity of cooperative in Pelalawan was highly but efficiency still low. Profit and income were highly, even liquidity of cooperative very high, and solvability was good

Juxtaposing BTE and ATE – on the role of the European insurance industry in funding civil litigation

One of the ways in which legal services are financed, and indeed shaped, is through private insurance arrangement. Two contrasting types of legal expenses insurance contracts (LEI) seem to dominate in Europe: before the event (BTE) and after the event (ATE) legal expenses insurance. Notwithstanding institutional differences between different legal systems, BTE and ATE insurance arrangements may be instrumental if government policy is geared towards strengthening a market-oriented system of financing access to justice for individuals and business. At the same time, emphasizing the role of a private industry as a keeper of the gates to justice raises issues of accountability and transparency, not readily reconcilable with demands of competition. Moreover, multiple actors (clients, lawyers, courts, insurers) are involved, causing behavioural dynamics which are not easily predicted or influenced. Against this background, this paper looks into BTE and ATE arrangements by analysing the particularities of BTE and ATE arrangements currently available in some European jurisdictions and by painting a picture of their respective markets and legal contexts. This allows for some reflection on the performance of BTE and ATE providers as both financiers and keepers. Two issues emerge from the analysis that are worthy of some further reflection. Firstly, there is the problematic long-term sustainability of some ATE products. Secondly, the challenges faced by policymakers that would like to nudge consumers into voluntarily taking out BTE LEI