Deep sea tests of a prototype of the KM3NeT digital optical module

The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deepwaters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on the first months of data taking and rate measurements. The analysis results highlight the capabilities of the new module design in terms of background suppression and signal recognition. The directionality of the optical module enables the recognition of multiple Cherenkov photons from the same (40)Kdecay and the localisation of bioluminescent activity in the neighbourhood. The single unit can cleanly identify atmospheric muons and provide sensitivity to the muon arrival directions

Characterisation of the Hamamatsu photomultipliers for the KM3NeT Neutrino Telescope

[EN] The Hamamatsu R12199-02 3-inch photomultiplier tube is the photodetector chosen for the first phase of the KM3NeT neutrino telescope. About 7000 photomultipliers have been characterised for dark count rate, timing spread and spurious pulses. The quantum eÿciency, the gain and the peak-to-valley ratio have also been measured for a sub-sample in order to determine parameter values needed as input to numerical simulations of the detector.The authors acknowledge the financial support of the funding agencies: Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), IdEx program and UnivEarthS Labex program at Sorbonne Paris Cite (ANR-10-LABX-0023 and ANR-11-IDEX-0005-02), France; 'Helmholtz Alliance for Astroparticle Physics' funded by the Initiative and Networking Fund of the Helmholtz Association, Germany; The General Secretariat of Research and Technology (GSRT), Greece; Istituto Nazionale di Fisica Nucleare (INFN), Ministero dell'Istruzione, dell'Universita e della Ricerca (MIUR), Italy; Agence de l'Oriental and CNRST, Morocco; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; National Authority for Scientific Research (ANCS), Romania; Plan Estatal de Investigacion (refs. FPA2015-65150-C3-1-P, -2-P and -3-P, (MINECO/FEDER)), Severo Ochoa Centre of Excellence and MultiDark Consolider (MINECO), and Prometeo and Grisolia programs (Generalitat Valenciana), Spain.Aiello, S.; Akrame, SE.; Ameli, F.; Anassontzis, EG.; Andre, M.; Androulakis, G.; Anghinolfi, M.... (2018). Characterisation of the Hamamatsu photomultipliers for the KM3NeT Neutrino Telescope. Journal of Instrumentation. 13:1-17. https://doi.org/10.1088/1748-0221/13/05/P05035S11713Adrián-Martínez, S., Ageron, M., Aharonian, F., Aiello, S., Albert, A., Ameli, F., … Anghinolfi, M. (2016). Letter of intent for KM3NeT 2.0. Journal of Physics G: Nuclear and Particle Physics, 43(8), 084001. doi:10.1088/0954-3899/43/8/084001Adrián-Martínez, S., Ageron, M., Aharonian, F., Aiello, S., Albert, A., Ameli, F., … Anvar, S. (2014). Deep sea tests of a prototype of the KM3NeT digital optical module. The European Physical Journal C, 74(9). doi:10.1140/epjc/s10052-014-3056-3Adrián-Martínez, S., Ageron, M., Aharonian, F., Aiello, S., Albert, A., Ameli, F., … Anton, G. (2016). The prototype detection unit of the KM3NeT detector. The European Physical Journal C, 76(2). doi:10.1140/epjc/s10052-015-3868-9Herold, B., Kalekin, O., & Reubelt, J. (2011). PMT characterisation for the KM3NeT project. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 639(1), 70-72. doi:10.1016/j.nima.2010.09.018Timmer, P., Heine, E., & Peek, H. (2010). Very low power, high voltage base for a Photo Multiplier Tube for the KM3NeT deep sea neutrino telescope. Journal of Instrumentation, 5(12), C12049-C12049. doi:10.1088/1748-0221/5/12/c12049Mollo, C. M., Bozza, C., Chiarusi, T., Costa, M., Capua, F. D., Kulikovskiy, V., … Vivolo, D. (2016). A new instrument for high statistics measurement of photomultiplier characteristics. Journal of Instrumentation, 11(08), T08002-T08002. doi:10.1088/1748-0221/11/08/t08002Adrián-Martínez, S., Ageron, M., Aiello, S., Albert, A., Ameli, F., Anassontzis, E. G., … Anton, G. (2016). A method to stabilise the performance of negatively fed KM3NeT photomultipliers. Journal of Instrumentation, 11(12), P12014-P12014. doi:10.1088/1748-0221/11/12/p12014Lubsandorzhiev, B. K., Vasiliev, R. V., Vyatchin, Y. E., & Shaibonov, B. A. J. (2006). Photoelectron backscattering in vacuum phototubes. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 567(1), 12-16. doi:10.1016/j.nima.2006.05.04

The Control Unit of the KM3NeT Data Acquisition System

The KM3NeT Collaboration runs a multi-site neutrino observatory in the Mediterranean Sea. Water Cherenkov particle detectors, deep in the sea and far off the coasts of France and Italy, are already taking data while incremental construction progresses. Data Acquisition Control software is operating off-shore detectors as well as testing and qualification stations for their components. The software, named Control Unit, is highly modular. It can undergo upgrades and reconfiguration with the acquisition running. Interplay with the central database of the Collaboration is obtained in a way that allows for data taking even if Internet links fail. In order to simplify the management of computing resources in the long term, and to cope with possible hardware failures of one or more computers, the KM3NeT Control Unit software features a custom dynamic resource provisioning and failover technology, which is especially important for ensuring continuity in case of rare transient events in multi-messenger astronomy. The software architecture relies on ubiquitous tools and broadly adopted technologies and has been successfully tested on several operating systems

Dependence of atmospheric muon flux on seawater depth measured with the first KM3NeT detection units: The KM3NeT Collaboration

KM3NeT is a research infrastructure located in the Mediterranean Sea, that will consist of two deep-sea Cherenkov neutrino detectors. With one detector (ARCA), the KM3NeT Collaboration aims at identifying and studying TeV–PeV astrophysical neutrino sources. With the other detector (ORCA), the neutrino mass ordering will be determined by studying GeV-scale atmospheric neutrino oscillations. The first KM3NeT detection units were deployed at the Italian and French sites between 2015 and 2017. In this paper, a description of the detector is presented, together with a summary of the procedures used to calibrate the detector in-situ. Finally, the measurement of the atmospheric muon flux between 2232–3386 m seawater depth is obtained

Letter of intent for KM3NeT 2.0

The main objectives of the KM3NeT Collaboration are ( i ) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ( ii ) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: ( 1 ) the high- energy astrophysical neutrino signal reported by IceCube and ( 2 ) the sizable contribution of electron neutrinos to the third neutrino mass eigenstate as reported by Daya Bay, Reno and others. To meet these objectives, the KM3NeT Collaboration plans to build a new Research Infrastructure con- sisting of a network of deep-sea neutrino telescopes in the Mediterranean Sea. A phased and distributed implementation is pursued which maximises the access to regional funds, the availability of human resources and the syner- gistic opportunities for the Earth and sea sciences community. Three suitable deep-sea sites are selected, namely off-shore Toulon ( France ) , Capo Passero ( Sicily, Italy ) and Pylos ( Peloponnese, Greece ) . The infrastructure will consist of three so-called building blocks. A building block comprises 115 strings, each string comprises 18 optical modules and each optical module comprises 31 photo-multiplier tubes. Each building block thus constitutes a three- dimensional array of photo sensors that can be used to detect the Cherenkov light produced by relativistic particles emerging from neutrino interactions. Two building blocks will be sparsely con fi gured to fully explore the IceCube signal with similar instrumented volume, different methodology, improved resolution and complementary fi eld of view, including the galactic plane. One building block will be densely con fi gured to precisely measure atmospheric neutrino oscillations. Original content from this work may be used under the ter

能取湖の底生動物群集と底質中の全硫化物

It is of great interest to numerous geophysical studies that the time series of global gravity field models derived from Gravity Recovery and Climate Experiment (GRACE) data remains uninterrupted after the end of this mission. With this in mind, some institutes have been spending efforts to estimate gravity field models from alternative sources of gravimetric data. This study focuses on the gravity field solutions estimated from Swarm global positioning system (GPS) data, produced by the Astronomical Institute of the University of Bern, the Astronomical Institute (ASU, Czech Academy of Sciences) and Institute of Geodesy (IfG, Graz University of Technology). The three sets of solutions are based on different approaches, namely the celestial mechanics approach, the acceleration approach and the short-arc approach, respectively. We derive the maximum spatial resolution of the time-varying gravity signal in the Swarm gravity field models to be degree 12, in comparison with the more accurate models obtained from K-band ranging data of GRACE. We demonstrate that the combination of the GPS-driven models produced with the three different approaches improves the accuracy in all analysed monthly solutions, with respect to any of them. In other words, the combined gravity field model consistently benefits from the individual strengths of each separate solution. The improved accuracy of the combined model is expected to bring benefits to the geophysical studies during the period when no dedicated gravimetric mission is operational.</p

A Water Cherenkov Test Beam Experiment for Hyper-Kamiokande and Future Large-scale Water-based Detectors

Water Cherenkov and water-based particle detector technologies are used to realize multi-kiloton scale experiments such as the currently operating Super-Kamiokande experiment, the planned Hyper-Kamiokande experiment and the proposed THEIA detector and ESSnuSB detectors. These experiments are operated or proposed to study a broad range of physics including neutrino oscillations, nucleon decay, dark matter and neutrinoless double beta decay. The neutrino oscillations program will also include kiloton scale near or intermediate detectors used to study neutrino production and interactions in the absence of neutrino oscillations, such as the Hyper-K Intermediate Water Cherenkov Detector (IWCD). Realization of these physics programs will require new detector technologies and percent level calibration of detector responses and models of physics processes within the detector. Here we describe our intent to propose a 50~ton scale Water Cherenkov test experiment (WCTE) to be deployed in a North or East test beam experimental area. The experiment will include a secondary target located just upstream of the experiment in order to produce very low energy particle fluxes, including charged pions. The WCTE program will be carried out with the following objectives: - Operate and understand the performance of new detector technologies such as multi-PMTs, dichroicon wavelength-separating cones and water-based liquid scintillator in a fully integrated detector. - Study the performance of a <1 kiloton scale water Cherenkov detector with known particle fluxes, and test and develop calibration systems necessary for accurate modeling of a detector of this size. - Measure important physics processes for the modeling of water Cherenkov detector responses, including high-angle Cherenkov light production, pion scattering and absorption, and secondary neutron production in hadron scattering. We aim to start operation of the water Cherenkov test experiment in 2021-2022

Proposal for A Water Cherenkov Test Beam Experiment for Hyper-Kamiokande andFuture Large-scale Water-based Detectors

Here we propose a 50 ton scale Water Cherenkov test experiment (WCTE) to be deployed in an East Area test beam line. The experiment will include a secondary target located just upstream of the experiment in order to produce very low energy particle fluxes, including charged pions. The WCTE program will be carried out with the following objectives. We will operate and understand the performance of new detector technologies such as multi-PMTs, and in a possible future phase, dichroicon wavelength-separating cones and water-based liquid scintillator in a fully integrated detector. We will study the performance of a <1 kiloton scale water Cherenkov detector with known particle fluxes, and test and develop calibration systems necessary for accurate modeling of a detector of this size. We will measure important physics processes for the modeling of water Cherenkov detector responses, including high-angle Cherenkov light production, pion scattering and absorption, and secondary neutron production in hadron scattering. We aim to start operation of the water Cherenkov test experiment in 2022