Metallo-supramolecular Architectures based on Multifunctional N-Donor Ligands

Self-assembly processes were used to construct supramolecular architectures based on metal-ligand interactions. The structures formed strongly depend on the used metal ion, the ligand type, the chosen counter ion and solvent as well as on the experimental conditions. The focus of the studies was the design of multifunctional N-donor ligands and the characterization of their complexing and structural properties. This work was divided into three distinct main parts: The bis(2-pyridylimine), the bis(2-hydroxyaryl) imine and the tripodal imine / amine ligand approach. In the first part a series of bis(2-pyridylimine) derivatives having different linking elements were employed as building blocks for novel supramolecular architectures. Reaction of individual d-block metal salts with these ligands has led to the isolation of coordination polymers, a metallamacrocycle, double-stranded helicates, triple-stranded helicates as well as of circular meso-helicates. The nature of the spacer in the Schiff base ligands, the noncovalent weak interactions, such as hydrogen bond, face-to-face π-π and edge-to-face CH-π interactions, are all important factors influencing the architecture of the final products. Topological control of the assembly process of the hexanuclear meso-helicates is clearly associated with the bidentate coordination of the sulfate anion which directs the formation of a double- rather than a triple-stranded helicate around the octahedrally coordinated Cu(II). Surprisingly, the variation of the linker function in the ligands, which significantly changes the linking angle of the pyridylimine strands, has only a little influence of the resulting structure. Also the use of a mixture of ligands does not influence the meso-helicate topology; the result is the symmetrically mixed meso-helicate. The new iron(II) triple helicate [Fe2(L5)3](PF6)4 14 {L5 = bis[4-(2-pyridylmethyleneimino)phenyl]-1,1-cyclohexane} in its chloride form binds strongly to DNA as confirmed by induced circular dichroism signals in both the metal-to-ligand charge transfer (MLCT) and in-ligand bands of the helicate. The induced CD spectrum gives some evidence that [Fe2(L5)3]4+ interacts with the DNA in a single binding mode, which is consistent with major groove binding. The cytotoxicity of the new iron(II) triple helicate 14 was evaluated on human lung cancer A549 cells and compared with that of cisplatin and that of the previously reported iron(II) triple helicate [Fe2(L1)3]4+{L1 = bis[4-(2-pyridylmethyleneimino)phenyl]methane}. The first results show some distinguishing features for 14 obviously caused by the existing structural differences of the complexes. In the second part of the thesis, novel uranyl complexes of the bis(2-hydroxyaryl) imine ligands have been synthesized and characterized. 1D coordination polymers and mononuclear structures were formed. In all complexes a distorted hexagonal bipyramidal coordination geometry around the uranyl centre is observed. The imine nitrogen atoms of the ligands do not bind to the metal centre but interact strongly with the hydroxy group via H-bonding. DFT calculations made with L8 ( α,α’-Bis(salicylimino)-m-xylene) are in good agreement with the X-ray crystal structure data. Liquid-liquid extraction studies involving selected ligands and Eu(III) or U(VI) indicate remarkably high selectivity for U(VI) over Eu(III) at weak acidic pH conditions. We believe that the study made opens up new possibilities for uranyl ion extraction which could be interesting in view of the treatment of nuclear waste. In the third part of the thesis, a series of multifunctional tripodal ligands with different N-donor centres were used for U(VI) and lanthanide, Nd(III), Eu(III) and Yb(III), binding and extraction. Reaction of these metal ions with selected tripodal ligands afforded complexes which were characterized by ESI mass spectroscopy. The complex composition was found to be 1:1 in all cases. The extraction behaviour of the tripodal ligands towards Eu(III) and U(VI) was studied both in the absence and presence of octanoic acid as co-ligand using the extraction system Eu(NO3)3 or UO2(NO3)2–buffer–H2O/ ligand–CHCl3. These separation systems show a remarkably high selectivity for U(VI) over Eu(III). It is interesting to note that the addition of the octanoic acid to the extraction system leads to high synergistic effects. A series of Eu(III) extraction experiments were done to clarify the composition of the extracted complexes. The results clearly point to the formation of various species with changing composition

Interactive thermal effects on metal–organic framework Polymer composite membranes

Polymeric membranes are important tools for intensifying separation processes in chemical industries, concerning strategic tasks such as CO2 sequestration, H2 production, and water supply and disposal. Mixed-matrix and supported membranes have been widely developed; recently many of them have been based on metal–organic frameworks (MOFs). However, most of the impacts MOFs have within the polymer matrix have yet to be determined. The effects related to thermal behavior arising from the combination of MOF ZIF-8 and polysulfone have now been quantified. The catalyzed oxidation of the polymer is strongly affected by the MOF crystal size and distribution inside the membrane. A 16 wt¿% 140 nm-sized ZIF-8 loading causes a 40¿% decrease in the observed activation energy of the polysulfone oxidation that takes place at a temperature (545¿°C) 80¿°C lower than in the raw polymer (625¿°C)

Characterisation of redox states of metal-organic frameworks by growth on modified thin-film electrodes

The application of metal-organic framework (MOF) materials in electrochemical and electrochromic devices remain rare. One of the main reasons for this is the inability to readily access their detailed electrochemistry. The inherent insolubility of these materials does not allow interrogation by traditional solution-based electrochemical or spectroscopic methods. In this study, we report a straightforward alternative approach to the spectroelectrochemical study of MOFs. We have used two systems as exemplars in this study, MFM-186 and MFM-180. The method involves chemical modification of a working electrode to attach MOF materials without using corrosive reagents such as inorganic acids or bases which otherwise could limit their application in device development. MFM-186 demonstrates the formation of a stable radical species [MFM-186]●+ on electrochemical oxidation, and this has been characterised by electrochemical, spectroelectrochemical and EPR spectroscopic techniques coupled to DFT analysis

Mixed matrix membranes based on 6FDA polyimide with silica and zeolite microsphere dispersed phases

Mixed matrix membranes (MMMs) prepared with 6FDA-DAM polymer using ordered mesoporous silica MCM-41 spheres (MSSs), Grignard surface functionalized MSSs (Mg-MSSs) and hollow zeolite spheres are studied to evaluate the effects of surface modification on performance. Performance near or above the so-called permeability-selectivity trade-off curve was achieved for the H2/CH4, CO2/N2, CO2/CH4, and O2/N2 systems. Two loadings (8 wt % and 16 wt %) of MSSs were tested using both constant volume and Wicke-Kallenbach sweep gas permeation systems. Besides single gas H2, CO2, O2, N2, and CH4 tests, mixed gas (50/50 vol %) selectivities were obtained for H2/CH4, CO2/N2, CO2/CH4, and O2/N2 and found to show enhancements vs. single gases for CO2 including cases. Mg-MSS/6FDA-DAM was the best performing MMM with H2/CH4, CO2/N2, CO2/CH4, and O2/N2 separation selectivities of 21.8 (794 Barrer of H2), 24.4 (1214 Barrer of CO2), 31.5 (1245 Barrer of CO2), and 4.3 (178 Barrer of O2), respectively

Protecting metal-organic framework crystals from hydrolytic degradation by spray-dry encapsulating them into polystyrene microspheres

A one-step, alternative, rapid, and scalable spray-drying (SD) synthesis of metal-organic frameworks (MOF)@polymer composites with enhanced hydrolytic stabilities was reported. SD was used to encapsulate preformed MOF crystals in a polymeric matrix to generate microscale MOF@polymer spheres. For proof-of-concept Hong-Kong University of Science and Technology-1 (HKUST-1) was chosen as the water-sensitive MOF, and polystyrene (PS) as the organic polymer. The synthesis of HKUST-1@PS began with preparation of a stable colloidal suspension of HKUST-1 crystals and a solution of PS in dichloromethane (DCM). This mixture was atomized using a two-fluid nozzle. After 40 min of continuous spraying, 1.7 g of a blue powder was recovered. The sample was then washed with ethanol and dried at 120°C under vacuum. This product was analyzed through field-emission scanning electron microscopy (FESEM), which indicated that it comprised smooth microspheres of HKUST-1@PS composites and did not contain any free HKUST-1. X-ray powder diffraction (XRPD) analysis of these spheres revealed a perfect match with the HKUST-1 pattern. The exclusive presence of microspheres and the match in XRPD patterns evidenced that HKUST-1 crystals were indeed entrapped within the polymeric matrix of PS

Metal-organic framework based mixed matrix membranes: a solution for highly efficient CO2 capture?

The field of metal-organic framework based mixed matrix membranes (M(4)s) is critically reviewed, with special emphasis on their application in CO2 capture during energy generation. After introducing the most relevant parameters affecting membrane performance, we define targets in terms of selectivity and productivity based on existing literature on process design for pre- and post-combustion CO2 capture. Subsequently, the state of the art in M(4)s is reviewed against these targets. Because final application of these membranes will only be possible if thin separation layers can be produced, the latest advances in the manufacture of M-4 hollow fibers are discussed. Finally, the recent efforts in understanding the separation performance of these complex composite materials and future research directions are outlined.European Commission FP7 608490 ERC 33574

Post-synthetic Ti Exchanged UiO-66 Metal-Organic Frameworks that Deliver Exceptional Gas Permeability in Mixed Matrix Membranes

Gas separation membranes are one of the lowest energy technologies available for the separation of carbon dioxide from flue gas. Key to handling the immense scale of this separation is maximised membrane permeability at sufficient selectivity for CO2 over N2. For the first time it is revealed that metals can be post-synthetically exchanged in MOFs to drastically enhance gas transport performance in membranes. Ti-exchanged UiO-66 MOFs have been found to triple the gas permeability without a loss in selectivity due to several effects that include increased affinity for CO2 and stronger interactions between the polymer matrix and the Ti-MOFs. As a result, it is also shown that MOFs optimized in previous works for batch-wise adsorption applications can be applied to membranes, which have lower demands on material quantities. These membranes exhibit exceptional CO2 permeability enhancement of as much as 153% when compared to the non-exchanged UiO-66 mixed-matrix controls, which places them well above the Robeson upper bound at just a 5 wt.% loading. The fact that maximum permeability enhancement occurs at such low loadings, significantly less than the optimum for other MMMs, is a major advantage in large-scale application due to the more attainable quantities of MOF needed

Metallo-supramolecular Architectures based on Multifunctional N-Donor Ligands

Self-assembly processes were used to construct supramolecular architectures based on metal-ligand interactions. The structures formed strongly depend on the used metal ion, the ligand type, the chosen counter ion and solvent as well as on the experimental conditions. The focus of the studies was the design of multifunctional N-donor ligands and the characterization of their complexing and structural properties. This work was divided into three distinct main parts: The bis(2-pyridylimine), the bis(2-hydroxyaryl) imine and the tripodal imine / amine ligand approach. In the first part a series of bis(2-pyridylimine) derivatives having different linking elements were employed as building blocks for novel supramolecular architectures. Reaction of individual d-block metal salts with these ligands has led to the isolation of coordination polymers, a metallamacrocycle, double-stranded helicates, triple-stranded helicates as well as of circular meso-helicates. The nature of the spacer in the Schiff base ligands, the noncovalent weak interactions, such as hydrogen bond, face-to-face π-π and edge-to-face CH-π interactions, are all important factors influencing the architecture of the final products. Topological control of the assembly process of the hexanuclear meso-helicates is clearly associated with the bidentate coordination of the sulfate anion which directs the formation of a double- rather than a triple-stranded helicate around the octahedrally coordinated Cu(II). Surprisingly, the variation of the linker function in the ligands, which significantly changes the linking angle of the pyridylimine strands, has only a little influence of the resulting structure. Also the use of a mixture of ligands does not influence the meso-helicate topology; the result is the symmetrically mixed meso-helicate. The new iron(II) triple helicate [Fe2(L5)3](PF6)4 14 {L5 = bis[4-(2-pyridylmethyleneimino)phenyl]-1,1-cyclohexane} in its chloride form binds strongly to DNA as confirmed by induced circular dichroism signals in both the metal-to-ligand charge transfer (MLCT) and in-ligand bands of the helicate. The induced CD spectrum gives some evidence that [Fe2(L5)3]4+ interacts with the DNA in a single binding mode, which is consistent with major groove binding. The cytotoxicity of the new iron(II) triple helicate 14 was evaluated on human lung cancer A549 cells and compared with that of cisplatin and that of the previously reported iron(II) triple helicate [Fe2(L1)3]4+{L1 = bis[4-(2-pyridylmethyleneimino)phenyl]methane}. The first results show some distinguishing features for 14 obviously caused by the existing structural differences of the complexes. In the second part of the thesis, novel uranyl complexes of the bis(2-hydroxyaryl) imine ligands have been synthesized and characterized. 1D coordination polymers and mononuclear structures were formed. In all complexes a distorted hexagonal bipyramidal coordination geometry around the uranyl centre is observed. The imine nitrogen atoms of the ligands do not bind to the metal centre but interact strongly with the hydroxy group via H-bonding. DFT calculations made with L8 ( α,α’-Bis(salicylimino)-m-xylene) are in good agreement with the X-ray crystal structure data. Liquid-liquid extraction studies involving selected ligands and Eu(III) or U(VI) indicate remarkably high selectivity for U(VI) over Eu(III) at weak acidic pH conditions. We believe that the study made opens up new possibilities for uranyl ion extraction which could be interesting in view of the treatment of nuclear waste. In the third part of the thesis, a series of multifunctional tripodal ligands with different N-donor centres were used for U(VI) and lanthanide, Nd(III), Eu(III) and Yb(III), binding and extraction. Reaction of these metal ions with selected tripodal ligands afforded complexes which were characterized by ESI mass spectroscopy. The complex composition was found to be 1:1 in all cases. The extraction behaviour of the tripodal ligands towards Eu(III) and U(VI) was studied both in the absence and presence of octanoic acid as co-ligand using the extraction system Eu(NO3)3 or UO2(NO3)2–buffer–H2O/ ligand–CHCl3. These separation systems show a remarkably high selectivity for U(VI) over Eu(III). It is interesting to note that the addition of the octanoic acid to the extraction system leads to high synergistic effects. A series of Eu(III) extraction experiments were done to clarify the composition of the extracted complexes. The results clearly point to the formation of various species with changing composition

Metallo-supramolecular Architectures based on Multifunctional N-Donor Ligands

Self-assembly processes were used to construct supramolecular architectures based on metal-ligand interactions. The structures formed strongly depend on the used metal ion, the ligand type, the chosen counter ion and solvent as well as on the experimental conditions. The focus of the studies was the design of multifunctional N-donor ligands and the characterization of their complexing and structural properties. This work was divided into three distinct main parts: The bis(2-pyridylimine), the bis(2-hydroxyaryl) imine and the tripodal imine / amine ligand approach. In the first part a series of bis(2-pyridylimine) derivatives having different linking elements were employed as building blocks for novel supramolecular architectures. Reaction of individual d-block metal salts with these ligands has led to the isolation of coordination polymers, a metallamacrocycle, double-stranded helicates, triple-stranded helicates as well as of circular meso-helicates. The nature of the spacer in the Schiff base ligands, the noncovalent weak interactions, such as hydrogen bond, face-to-face π-π and edge-to-face CH-π interactions, are all important factors influencing the architecture of the final products. Topological control of the assembly process of the hexanuclear meso-helicates is clearly associated with the bidentate coordination of the sulfate anion which directs the formation of a double- rather than a triple-stranded helicate around the octahedrally coordinated Cu(II). Surprisingly, the variation of the linker function in the ligands, which significantly changes the linking angle of the pyridylimine strands, has only a little influence of the resulting structure. Also the use of a mixture of ligands does not influence the meso-helicate topology; the result is the symmetrically mixed meso-helicate. The new iron(II) triple helicate [Fe2(L5)3](PF6)4 14 {L5 = bis[4-(2-pyridylmethyleneimino)phenyl]-1,1-cyclohexane} in its chloride form binds strongly to DNA as confirmed by induced circular dichroism signals in both the metal-to-ligand charge transfer (MLCT) and in-ligand bands of the helicate. The induced CD spectrum gives some evidence that [Fe2(L5)3]4+ interacts with the DNA in a single binding mode, which is consistent with major groove binding. The cytotoxicity of the new iron(II) triple helicate 14 was evaluated on human lung cancer A549 cells and compared with that of cisplatin and that of the previously reported iron(II) triple helicate [Fe2(L1)3]4+{L1 = bis[4-(2-pyridylmethyleneimino)phenyl]methane}. The first results show some distinguishing features for 14 obviously caused by the existing structural differences of the complexes. In the second part of the thesis, novel uranyl complexes of the bis(2-hydroxyaryl) imine ligands have been synthesized and characterized. 1D coordination polymers and mononuclear structures were formed. In all complexes a distorted hexagonal bipyramidal coordination geometry around the uranyl centre is observed. The imine nitrogen atoms of the ligands do not bind to the metal centre but interact strongly with the hydroxy group via H-bonding. DFT calculations made with L8 ( α,α’-Bis(salicylimino)-m-xylene) are in good agreement with the X-ray crystal structure data. Liquid-liquid extraction studies involving selected ligands and Eu(III) or U(VI) indicate remarkably high selectivity for U(VI) over Eu(III) at weak acidic pH conditions. We believe that the study made opens up new possibilities for uranyl ion extraction which could be interesting in view of the treatment of nuclear waste. In the third part of the thesis, a series of multifunctional tripodal ligands with different N-donor centres were used for U(VI) and lanthanide, Nd(III), Eu(III) and Yb(III), binding and extraction. Reaction of these metal ions with selected tripodal ligands afforded complexes which were characterized by ESI mass spectroscopy. The complex composition was found to be 1:1 in all cases. The extraction behaviour of the tripodal ligands towards Eu(III) and U(VI) was studied both in the absence and presence of octanoic acid as co-ligand using the extraction system Eu(NO3)3 or UO2(NO3)2–buffer–H2O/ ligand–CHCl3. These separation systems show a remarkably high selectivity for U(VI) over Eu(III). It is interesting to note that the addition of the octanoic acid to the extraction system leads to high synergistic effects. A series of Eu(III) extraction experiments were done to clarify the composition of the extracted complexes. The results clearly point to the formation of various species with changing composition