Heat and shear stability of particle stabilised foams for application in gluten‑free bread

Erworben im Rahmen der Schweizer Nationallizenzen (http://www.nationallizenzen.ch) ​Bread forms an integral part of the daily diet in many cultures worldwide. At the same time, a signifcant number of people try to avoid wheat-based products for either health reasons or due to personal preferences. The absence of a protein network in gluten free bread afects its structure, taste, texture and shelf-life. This paper suggests a technological solution to this issue that uses a pre-foamed mass of gluten free raw materials which is mixed with the bread’s ingredients, then kneaded and baked to form a high quality gluten free bread. To survive the high shear stresses during kneading and temperature increase during baking, the foam requires exceptional stability. This stability was achieved through particle stabilisation of the bubble inter faces. Both of the tested foams (with and without particles) exhibited thermal stability up to 80 °C. However, resistance to shear stresses was higher in the particle stabilised foams. Of all the tested particles, linseed press cake and banana powder led to the best results. In conclusion, particle stabilised foams seem very well suited to applications in gluten free baked goods. Further application potential is seen for vegan foamed desserts

Sulfo- and Oxy-analogues of Arginine: Synthesis, Analysis and Preliminary Biological Screening

A novel methodology for the synthesis of sulfo- and oxy-modified amino acid analogues of arginine (Arg) has been developed using both conventional and polymer assisted synthesis from ready available amino acid precursor. Introduction of guanidine group was made also by the MWA synthesis. The in vitro inhibitory effect of the amino acid analogues on the growth of murine erythroleukemia cells, clone F4N in culture was also studied. (doi: 10.5562/cca1780

Evaluation of Sustainable Development Management in EU Countries

The term sustainable development is used in many areas and spheres of life and is becoming a modern phenomenon determining the direction of progress of every society. Sustainable development implies continuous economic development with respect to environmental principles and focuses on overcoming conflicts between economy and ecology. The aim of this paper is to evaluate sustainable development management in EU countries through selected indicators characterizing sustainable development and its core dimensions. We present the results of an evaluation of the sustainable development of EU countries using cluster analysis. Countries that are similar in terms of sustainability are identified by cluster analysis. Four clusters were separated, the affiliation of each country to a particular cluster was determined, and the characteristics of each cluster were defined. The goal of sustainability management is to create an adequate approach to development of the economic and environmental performance, and therefore achieve sustainability. The achievements of most developed countries should be an incentive for those that are at a lower level of development. In addition, this research provides insight into some specific goals of sustainable development where some countries are lagging behind. This could be the basis for directing efforts in specific areas of sustainable development to improve their own position in such an important global issue

Assessment of the suitability of millet for the production of pasta

In temperate climate zones such as Switzerland, wheat is exposed to increasing heat and water stress due to climate change. Millet is a promising alternative crop with a high heat resistance and the additional benefit of being gluten-free. However, the market for organic Swiss millet within Switzerland is saturated with the current product portfolio of flakes or dehulled millet. Therefore, novel end products with a high millet content, such as pasta, could play a key role in increasing consumer demand. Against this background, the suitability of the millet (Panicum miliaceum L.) variety Alba for producing spaghetti was investigated. To optimize the quality of the millet spaghetti, different pre-treatments and recipes were tested, i.e., hull particles were sieved out of the flours and blends with other gluten-free and gluten-containing flours were tested. Finally, the best types of spaghetti were subject to sensory testing, and the color and texture were both quantified. In addition, nutritional quality was assessed. The analytical results showed that a firmness comparable to durum spaghetti was reached for pure millet, 50% millet mixed with 50% corn and rice flour (95:5), and 15% millet mixed with 85% durum wheat. The brownish appearance, slightly rough surface, and nutty flavor of the spaghetti made from millet was especially popular among consumers with a diet-conscious lifestyle. The millet pasta had a high content of iron, zinc and dietary fiber. Since the production processes were able to be implemented in industry without major additional costs, implementation in the market seems feasible

Effect of particle characteristics and foaming parameters on resulting foam quality and stability

Highlights: • Use of particles without emulsifier reduced median bubble size and improved foam stability. • Combining PGE emulsifier and particles resulted in higher foam stability. • Particularly low drainage was observed in particle stabilized foams using banana powder. • Increases in particle size and wetting angle correlated with reduced drainage. • High shear rates were strongly associated with narrower bubble size distributions.In this study, the effects of ten different food-grade particles on bubble quality and stabilization of particle-stabilized food foams in batch and continuous foaming with and without polyglycerol ester (PGE) as an emulsifier were investigated. Particle properties, such as contact angle and porosity, and varying process parameters, such as shear rate and gas fraction, were assessed with respect to their impact on bubble size x50,0, bubble size distribution width and drainage. The smallest bubble size x50,0 in foams without PGE could be achieved with banana powder (88 μm), calcium carbonate (89 μm) and microcrystalline cellulose (79 μm) particles. In comparison, the smallest size in the reference without particles were 105 μm. Combining the use of particles with PGE further reduced bubble size by up to 57% and drainage by up to 100%. Increasing the shear rate from 4922 s−1 (35 μm) to 9844 s−1 (14 μm) resulted in smaller mean bubble sizes and significantly narrower bubble size distributions whereas no distinct correlation between gas fraction and resulting bubble size was found. This study shows that using suitable particles in combination with an optimized foaming process promotes both bubble quality and the stability of foams

Evaluation of innovative technological approaches to replace palmoil with physically modified Swiss rapeseed oil in bakery products

Palm fat is often used in baked goods because of its relatively low cost, and its positive impact on texture and shelf life. Demand for alternatives has risen in recent years due to concerns about the ecological and social sustainability. This is a challenge for the bakery industry since palm oil possesses unique properties. In this study, unhydrogenated rapeseed oil was processed using novel physical technologies, such as wax crystallisation, stabilized foaming and Pickering emulsions, in order to simulate palm oil properties. Analysis showed that while the initial viscosity of the fat substitute products was low compared to palm fat, the fat replacement products behaved very similarly to palm fat in the baking experiments. The resulting biscuits baked with emulsified rapeseed oil and rapeseed oil complemented with wax crystals were judged to be suitable replacements for palm fat in terms of processability, as well as analytical and sensory assessment

The Single-Case Reporting Guideline In BEhavioural Interventions (SCRIBE) 2016 statement

We developed a reporting guideline to provide authors with guidance about what should be reported when writing a paper for publication in a scientific journal using a particular type of research design: the single-case experimental design. This report describes the methods used to develop the Single-Case Reporting guideline In BEhavioural interventions (SCRIBE) 2016. As a result of 2 online surveys and a 2-day meeting of experts, the SCRIBE 2016 checklist was developed, which is a set of 26 items that authors need to address when writing about single-case research. This article complements the more detailed SCRIBE 2016 Explanation and Elaboration article (Tate et al., 2016) that provides a rationale for each of the items and examples of adequate reporting from the literature. Both these resources will assist authors to prepare reports of single-case research with clarity, completeness, accuracy, and transparency. They will also provide journal reviewers and editors with a practical checklist against which such reports may be critically evaluated. We recommend that the SCRIBE 2016 is used by authors preparing manuscripts describing single-case research for publication, as well as journal reviewers and editors who are evaluating such manuscripts.Funding for the SCRIBE project was provided by the Lifetime Care and Support Authority of New South Wales, Australia. The funding body was not involved in the conduct, interpretation or writing of this work. We acknowledge the contribution of the responders to the Delphi surveys, as well as administrative assistance provided by Kali Godbee and Donna Wakim at the SCRIBE consensus meeting. Lyndsey Nickels was funded by an Australian Research Council Future Fellowship (FT120100102) and Australian Research Council Centre of Excellence in Cognition and Its Disorders (CE110001021). For further discussion on this topic, please visit the Archives of Scientific Psychology online public forum at http://arcblog.apa.org. (Lifetime Care and Support Authority of New South Wales, Australia; FT120100102 - Australian Research Council Future Fellowship; CE110001021 - Australian Research Council Centre of Excellence in Cognition and Its Disorders)Published versio

Infective Endocarditis: Predictive Factors for Diagnosis and Mortality in Surgically Treated Patients

Background: Diagnosis of infective endocarditis (IE) often is challenging, and mortality is high in such patients. Our goal was to characterize common diagnostic tools to enable a rapid and accurate diagnosis and to correlate these tools with mortality outcomes. Methods: Because of the possibility of including perioperative diagnostics, only surgically treated patients with suspected left-sided IE were included in this retrospective, monocentric study. A clinical committee confirmed the diagnosis of IE. Results: 201 consecutive patients (age 64 ± 13 years, 74% male) were finally diagnosed with IE, and 14 patients turned out IE-negative. Preoperative tests with the highest sensitivity for IE were positive blood cultures (89.0%) and transesophageal echocardiography (87.5%). In receiver operating characteristics, vegetation size revealed high predictive power for IE (AUC 0.800, p < 0.001) with an optimal cut-off value of 11.5 mm. Systemic embolism was associated with mortality, and N-terminal prohormone of B-type natriuretic peptide (NT-proBNP) had predictive power for mortality. Conclusion: If diagnostic standard tools remain inconclusive, we suggest employing novel cut-off values to increase diagnostic accuracy and accelerate diagnosis. Patients with embolism or elevated NT-proBNP deserve a closer follow-up

Regional Brain and Spinal Cord Volume Loss in Spinocerebellar Ataxia Type 3

Background: Given that new therapeutic options for spinocerebellar ataxias are on the horizon, there is a need for markers that reflect disease-related alterations, in particular, in the preataxic stage, in which clinical scales are lacking sensitivity. Objective: The objective of this study was to quantify regional brain volumes and upper cervical spinal cord areas in spinocerebellar ataxia type 3 in vivo across the entire time course of the disease. Methods: We applied a brain segmentation approach that included a lobular subsegmentation of the cerebellum to magnetic resonance images of 210 ataxic and 48 preataxic spinocerebellar ataxia type 3 mutation carriers and 63 healthy controls. In addition, cervical cord cross-sectional areas were determined at 2 levels. Results: The metrics of cervical spinal cord segments C3 and C2, medulla oblongata, pons, and pallidum, and the cerebellar anterior lobe were reduced in preataxic mutation carriers compared with controls. Those of cervical spinal cord segments C2 and C3, medulla oblongata, pons, midbrain, cerebellar lobules crus II and X, cerebellar white matter, and pallidum were reduced in ataxic compared with nonataxic carriers. Of all metrics studied, pontine volume showed the steepest decline across the disease course. It covaried with ataxia severity, CAG repeat length, and age. The multivariate model derived from this analysis explained 46.33% of the variance of pontine volume. Conclusion: Regional brain and spinal cord tissue loss in spinocerebellar ataxia type 3 starts before ataxia onset. Pontine volume appears to be the most promising imaging biomarker candidate for interventional trials that aim at slowing the progression of spinocerebellar ataxia type 3. © 2021 The Authors. Movement Disorders published by Wiley Periodicals LLC on behalf of International Parkinson and Movement Disorder Society

Antimicrobial resistance among migrants in Europe: a systematic review and meta-analysis

BACKGROUND: Rates of antimicrobial resistance (AMR) are rising globally and there is concern that increased migration is contributing to the burden of antibiotic resistance in Europe. However, the effect of migration on the burden of AMR in Europe has not yet been comprehensively examined. Therefore, we did a systematic review and meta-analysis to identify and synthesise data for AMR carriage or infection in migrants to Europe to examine differences in patterns of AMR across migrant groups and in different settings. METHODS: For this systematic review and meta-analysis, we searched MEDLINE, Embase, PubMed, and Scopus with no language restrictions from Jan 1, 2000, to Jan 18, 2017, for primary data from observational studies reporting antibacterial resistance in common bacterial pathogens among migrants to 21 European Union-15 and European Economic Area countries. To be eligible for inclusion, studies had to report data on carriage or infection with laboratory-confirmed antibiotic-resistant organisms in migrant populations. We extracted data from eligible studies and assessed quality using piloted, standardised forms. We did not examine drug resistance in tuberculosis and excluded articles solely reporting on this parameter. We also excluded articles in which migrant status was determined by ethnicity, country of birth of participants' parents, or was not defined, and articles in which data were not disaggregated by migrant status. Outcomes were carriage of or infection with antibiotic-resistant organisms. We used random-effects models to calculate the pooled prevalence of each outcome. The study protocol is registered with PROSPERO, number CRD42016043681. FINDINGS: We identified 2274 articles, of which 23 observational studies reporting on antibiotic resistance in 2319 migrants were included. The pooled prevalence of any AMR carriage or AMR infection in migrants was 25·4% (95% CI 19·1-31·8; I2 =98%), including meticillin-resistant Staphylococcus aureus (7·8%, 4·8-10·7; I2 =92%) and antibiotic-resistant Gram-negative bacteria (27·2%, 17·6-36·8; I2 =94%). The pooled prevalence of any AMR carriage or infection was higher in refugees and asylum seekers (33·0%, 18·3-47·6; I2 =98%) than in other migrant groups (6·6%, 1·8-11·3; I2 =92%). The pooled prevalence of antibiotic-resistant organisms was slightly higher in high-migrant community settings (33·1%, 11·1-55·1; I2 =96%) than in migrants in hospitals (24·3%, 16·1-32·6; I2 =98%). We did not find evidence of high rates of transmission of AMR from migrant to host populations. INTERPRETATION: Migrants are exposed to conditions favouring the emergence of drug resistance during transit and in host countries in Europe. Increased antibiotic resistance among refugees and asylum seekers and in high-migrant community settings (such as refugee camps and detention facilities) highlights the need for improved living conditions, access to health care, and initiatives to facilitate detection of and appropriate high-quality treatment for antibiotic-resistant infections during transit and in host countries. Protocols for the prevention and control of infection and for antibiotic surveillance need to be integrated in all aspects of health care, which should be accessible for all migrant groups, and should target determinants of AMR before, during, and after migration. FUNDING: UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College Healthcare Charity, the Wellcome Trust, and UK National Institute for Health Research Health Protection Research Unit in Healthcare-associated Infections and Antimictobial Resistance at Imperial College London