87 research outputs found
PLY WISE FAILURE ANALYSIS OF MONO LEAF SPRING USING HYBRID C-GFRP COMPOSITES
Composite materials are a better alternative for Leaf spring material in automobiles since they have higher stiffness, high impact energy absorption, lesser stresses and also higher strength to weight ratio. The objective is to study the ply wise failure criteria in the composite leaf springs. Leaf springs are modeled and analyzed using ACP PrePost and studied for failure criteria based on four failure theories which are: maximum stress failure theory, maximum strain failure theory, Tsai-Hill failure theory and Tsai-Wu failure theory. Failure load based on these theories is calculated by conducting a parametric study. To improve the maximum failure load, hybrid composites are designed and analyzed by replacing the top, bottom and center layers of the composite laminate. The four different cross-sections which are analyzed are Eglass/epoxy, HC1, HC2 and HC3. The study shows that replacing the top, bottom and center layers does improve the maximum failure load. Although this introduces higher stresses in the component, the stresses in the Eglass/epoxy material at the same positions from the center of the laminate are reduced. HC3 shows 30.7% increment in failure load by considering only vertical loads and 20.8% increment in failure load by considering vertical, side loads and twist moment simultaneously. There is an agreeable error of 1.44 – 1.65% in the results obtained for deformation and 0.88 – 1.33% for failure load between simulation and theoretical calculations. Mechanical properties of the Eglass/epoxy material are evaluated by conducting tensile test and three-point bending test. Mono leaf spring similar to the dimensions of Maruthi 800 vehicle is made using hand layup method. The load vs deformation results of leaf spring show a good agreement between the experimental and the simulation values
Recommended from our members
Impact of Red Gram (Cajanus cajan L) Production Technologies Advised by the KVK Jammikunta in Karimnagar District of Telangana State, India
The study conducted at KVK Jammikunta of Telangana State along with its 15 adopted villages was selected for the study. A sample of 60 Red gram growing farmers who are adopting the KVK technologies and 30 Red gram farmers who are not covered under KVK production technologies were selected from the adopted villages. Present paper highlights the impact of Red gram production technologies in terms of adoption quotient, productivity and profitability in Karimnagar district of Telangana State. High impact in terms of adoption quotient, productivity and profitability of red gram production technologies is observed among the KVK Jammikunta adopted farmers compared to the non adopted farmers
Recommended from our members
Impact of Paddy (Oryza sativa L) Production Technologies Advised by the KVK Jammikunta in Karimnagar District of Telangana State, India
The present paper highlights the impact of paddy production technologies in terms of adoption quotient, productivity and profitability in Karimnagar district of Telangana State (Formerly Andhra Pradesh). High impact in terms of adoption quotient, productivity and profitability of paddy production technologies is observed among the KVK Jammikunta adopted farmers compared to the non adopted farmers
EFFECT OF INTEGRATED CROP MANAGEMENT PRACTICES ON YIELD AND ECONOMICS OF WATERMELON (Citrullus lanatus L.) IN KHAMMAM DISTRICT OF TELANGANA
The present investigation was conducted in different villages under Krishi Vigyan Kendra, Wyra, Khammam operational areas during 2016-17 to 2018-19. Total 30 front line demonstrations were laid out on farmers’ fields in the district. The result of present study revealed that average highest yield 41.5 t/ha was noted in demonstration plot over control (28.5 t/ha) and 43.31 percent of average yield increase was recorded over control plot. Fruit cracking percentage was high in control plot (20.26%) over demonstration plot i.e 10.06 percent. The extension gap ranged from 12.5 t/ha to 13.5 t/ha and technology gap ranged between 5 to 11.5 t/ha respectively, with the technology index of 17 percent during the demonstration years. Besides this, the demonstrated plots gave higher gross returns, net returns with higher benefit cost ratio when compared to farmer’s practice. In present study efforts were also made to study the impact of FLD on horizontal spread which has increased by 105 %, if appropriate package and practices were followed. Further, the study was undertaken to do a formative and summative (outcome and impact) evaluation of the frontline demonstration on integrated crop management in watermelon
Marker-assisted introgression of a major broad spectrum blast resistance gene Pi54 into a popular rice variety Warangal Samba (WGL-14)
Warangal Samba (WGL-14) is a widely known medium slender-grain rice variety that matures within 135-140 days. This variety has been extensively cultivated in Telangana, India, due to its high yield potential of 7-7.5 t/ha and its favourable cooking qualities. However, it is highly susceptible to rice blast disease caused by the fungus Magnaporthe oryzae. This research sought to improve the blast resistance of WGL-14 by incorporating the Pi54 gene, a widely recognized blast resistance gene, using (MABB) along with selection based on phenotypic traits. NLR-145, a high-yielding rice variety containing the Pi54 gene, was used as the donor parent and crossed with WGL-14 to produce F1 plants. The Pi54MAS marker, which is specific to the Pi54 gene, was employed for foreground selection in F1, BC1F1, BC2F1 and BC3F1 generations, while background selection involved 80 parentals polymorphic SSR markers and phenotypic traits observed in each backcross generation. At BC3F5 generation, 28 lines were selected for their strong resistance to blast, high yields, plant type, grain characteristics and other traits comparable to the recurrent parent. These 28 lines were tested in yield trials during the wet seasons from 2018 to 2020 at the Regional Agricultural Research Station (RARS) in Warangal. At Advanced Varietal Trials (AVT), 3 lines namely WGL-1467, WGL-1472 and WGL-1473 were identified as having strong blast resistance and superior agronomic traits, closely resembling the original WGL-14
Mortality and pulmonary complications in patients undergoing surgery with perioperative SARS-CoV-2 infection: an international cohort study
Background: The impact of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) on postoperative recovery needs to be understood to inform clinical decision making during and after the COVID-19 pandemic. This study reports 30-day mortality and pulmonary complication rates in patients with perioperative SARS-CoV-2 infection. Methods: This international, multicentre, cohort study at 235 hospitals in 24 countries included all patients undergoing surgery who had SARS-CoV-2 infection confirmed within 7 days before or 30 days after surgery. The primary outcome measure was 30-day postoperative mortality and was assessed in all enrolled patients. The main secondary outcome measure was pulmonary complications, defined as pneumonia, acute respiratory distress syndrome, or unexpected postoperative ventilation. Findings: This analysis includes 1128 patients who had surgery between Jan 1 and March 31, 2020, of whom 835 (74·0%) had emergency surgery and 280 (24·8%) had elective surgery. SARS-CoV-2 infection was confirmed preoperatively in 294 (26·1%) patients. 30-day mortality was 23·8% (268 of 1128). Pulmonary complications occurred in 577 (51·2%) of 1128 patients; 30-day mortality in these patients was 38·0% (219 of 577), accounting for 81·7% (219 of 268) of all deaths. In adjusted analyses, 30-day mortality was associated with male sex (odds ratio 1·75 [95% CI 1·28–2·40], p\textless0·0001), age 70 years or older versus younger than 70 years (2·30 [1·65–3·22], p\textless0·0001), American Society of Anesthesiologists grades 3–5 versus grades 1–2 (2·35 [1·57–3·53], p\textless0·0001), malignant versus benign or obstetric diagnosis (1·55 [1·01–2·39], p=0·046), emergency versus elective surgery (1·67 [1·06–2·63], p=0·026), and major versus minor surgery (1·52 [1·01–2·31], p=0·047). Interpretation: Postoperative pulmonary complications occur in half of patients with perioperative SARS-CoV-2 infection and are associated with high mortality. Thresholds for surgery during the COVID-19 pandemic should be higher than during normal practice, particularly in men aged 70 years and older. Consideration should be given for postponing non-urgent procedures and promoting non-operative treatment to delay or avoid the need for surgery. Funding: National Institute for Health Research (NIHR), Association of Coloproctology of Great Britain and Ireland, Bowel and Cancer Research, Bowel Disease Research Foundation, Association of Upper Gastrointestinal Surgeons, British Association of Surgical Oncology, British Gynaecological Cancer Society, European Society of Coloproctology, NIHR Academy, Sarcoma UK, Vascular Society for Great Britain and Ireland, and Yorkshire Cancer Research
Studies on genetic variability and character association in Pigeonpea (Cajanus cajan (L.) Mill sp.)
- …
