Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

Measurement of the cross-section for b-jets produced in association with a Z boson at root s=7 TeV with the ATLAS detector ATLAS Collaboration

A measurement is presented of the inclusive cross-section for b-jet production in association with a Z boson in pp collisions at a centre-of-mass energy of root s = 7 TeV. The analysis uses the data sample collected by the ATLAS experiment in 2010, corresponding to an integrated luminosity of approximately 36 pb(-1). The event selection requires a Z boson decaying into high P-T electrons or muons, and at least one b-jet, identified by its displaced vertex, with transverse momentum p(T) > 25 GeV and rapidity vertical bar y vertical bar < 2.1. After subtraction of background processes, the yield is extracted from the vertex mass distribution of the candidate b-jets. The ratio of this cross-section to the inclusive Z cross-section (the average number of b-jets per Z event) is also measured. Both results are found to be in good agreement with perturbative QCD predictions at next-to-leading order

Search for light top squark pair production in final states with leptons and b -jets with the ATLAS detector in s=7\sqrt{s}=7 TeV proton-proton collisions

The results of a search for pair production of light top squarks are presented, using 4.7 fb^-1 of sqrt(s) = 7 TeV proton-proton collisions collected with the ATLAS detector at the Large Hadron Collider. This search targets top squarks with masses similar to, or lighter than, the top quark mass. Final states containing exclusively one or two leptons (e, mu), large missing transverse momentum, light-jets and b-jets are used to reconstruct the top squark pair system. Global mass scale variables are used to separate the signal from a large ttbar background. No excess over the Standard Model expectations is found. The results are interpreted in the framework of the Minimal Supersymmetric Standard Model, assuming the top squark decays exclusively to a chargino and a b-quark. Light top squarks with masses between 123-167 GeV are excluded for neutralino masses around 55 GeV

Search for the standard model Higgs boson in the diphoton decay channel with 4.9fb -1 of pp collision data at √s=7TeV with atlas

A search for the standard model Higgs boson is performed in the diphoton decay channel. The data used correspond to an integrated luminosity of 4.9  fb-1 collected with the ATLAS detector at the Large Hadron Collider in proton-proton collisions at a center-of-mass energy of √s=7  TeV. In the diphoton mass range 110–150 GeV, the largest excess with respect to the background-only hypothesis is observed at 126.5 GeV, with a local significance of 2.8 standard deviations. Taking the look-elsewhere effect into account in the range 110–150 GeV, this significance becomes 1.5 standard deviations. The standard model Higgs boson is excluded at 95% confidence level in the mass ranges of 113–115 GeV and 134.5–136 GeV

Search for the standard model Higgs boson in the diphoton decay channel with 4.9fb -1 of pp collision data at √s=7TeV with atlas

A search for the standard model Higgs boson is performed in the diphoton decay channel. The data used correspond to an integrated luminosity of 4.9  fb-1 collected with the ATLAS detector at the Large Hadron Collider in proton-proton collisions at a center-of-mass energy of √s=7  TeV. In the diphoton mass range 110–150 GeV, the largest excess with respect to the background-only hypothesis is observed at 126.5 GeV, with a local significance of 2.8 standard deviations. Taking the look-elsewhere effect into account in the range 110–150 GeV, this significance becomes 1.5 standard deviations. The standard model Higgs boson is excluded at 95% confidence level in the mass ranges of 113–115 GeV and 134.5–136 GeV

GeoKern: Een software platform voor de produktie van milieu-indicatoren. Een case studie op het Laboratorium voor Bodem en Grondwater Onderzoek ruimtelijke informatie voorziening

Het RIVM heeft de opdracht om jaarlijks een MilieuBalans en om elke vier jaar een MilieuVerkenning te publiceren. Deze rapporten hebben een geformaliseerde inhoud en de publikatie vereist kwaliteitsgeborgde berekening en tijdige aanlevering van milieu-indicatoren. Om de kwaliteit van de rapporten te kunnen blijven garanderen wordt een informatie infrastructuur ontwikkeld die de integratie van databases, modellen, en administratieve procedures bij de milieu laboratoria bewerkstelligt. Het onderzoek, beschreven in dit rapport betreft een uitbreiding op de operationele GIS-infrastructuur van RIVM-LBG, het Laboratorium voor Bodem en Grondwateronderzoek. Er wordt een overzicht gegeven van het bestaande software platform 'GeoBase', waarmee LBG beschikt over de functionaliteit van een geodata warehouse. Het vormt vervolgens het uitgangspunt voor het ontwerp en de implementatie van 'GeoKern', een platform ter onder- steuning van de produktie van milieu-indicatoren. GeoKern maakt het mogelijk om de voortgang in de produktie te volgen en om de geautomatiseerde produktie te besturen. Het systeemconcept is gebaseerd op een produktiemodel, dat bestaat uit een aantal produktiestappen, die onderling verbonden zijn door produktie inputs en outputs. Zodra de fysieke files en executeerbare programma's aan het model bekend gemaakt zijn, kan het produktiesysteem in gang gezet worden. De functionaliteit van GeoKern wordt gedemonsteerd aan de hand van DEMNAT-2, een ecohydrologisch model om de gevolgen van ingrepen in de waterhuishouding op grondwaterafhankelijke vegetatie te kunnen voorspellen. Voor DEMNAT-2 is geautomatiseerde produktie werkelijkheid geworden.RIVM, the National Institute of Public Health and Environmental Protection in the Netherlands is committed to publishing a State of the Environment report annually and an Environmental Outlook every four years. The publication of these formally structured reports is dependent on the quality controlled calculation and timely provision of environmental indicators. To guarantee the quality of the reports an information infrastructure has been developed integrating databases, models and administrative procedures in the environmental departments of the institute. The present research focuses on extending the GIS infrastructure operational at RIVM-LBG, the Laboratory of Soil and Groundwater Research. The existing software platform 'GeoBase', which provides the facilities of a geodata warehouse, is reviewed and taken as a starting-point for the design and implementation of 'GeoKern', a platform to support the production of environmental indicators. GeoKern enables the monitoring of production progress and the control of automated production. The system concept is based on a production model consisting of production steps interconnected by production inputs and outputs. Once the physical files and executable programs are added, the production system can be set into motion. GeoKern's functionality is demonstrated by means of DEMNAT-2, an ecohydrological model to predict the impact of water management scenarios on groundwater-dependent vegetation types. Furthermore, for DEMNAT-2 automated production is a reality.RIV