A Structure-from-Motion Pipeline for Generating Digital Elevation Models for Surface-Runoff Analysis

Digital Elevation Models (DEMs) are used to derive information from the morphology of a land. The topographic attributes obtained from the DEM data allow the construction of watershed delineation useful for predicting the behavior of systems and for studying hydrological processes. Imagery acquired from Unmanned Aerial Vehicles (UAVs) and 3D photogrammetry techniques offer cost-effective advantages over other remote sensing methods such as LIDAR or RADAR. In particular, a high spatial resolution for measuring the terrain microtopography. In this work, we propose a Structure from Motion (SfM) pipeline using UAVs for generating high-resolution, high-quality DEMs for developing a rainfall-runoff model to study flood areas. SfM is a computer vision technique that simultaneously estimates the 3D coordinates of a scene and the pose of a camera that moves around it. The result is a 3D point cloud which we process to obtain a georeference model from the GPS information of the camera and ground control points. The pipeline is based on open source software OpenSfM and OpenDroneMap. Encouraging experimental results on a test land show that the produced DEMs meet the metrological requirements for developing a surface-runoff model. © Published under licence by IOP Publishing Ltd.This work has been partly funded by Universidad Tecnológica de Bolívar project (FI2006T2001). The authors thank Direccion de Investigaciones Universidad Tecnologica de Bolivar for their support

Effect of herbal choline and rumen-protected methionine on lamb performance and blood metabolites

Twenty-four lambs (Pelibuey x East Friesian), weighing 22.7 ± 3.2 kg, were fed a basal diet of corn silage, oat hay, alfalfa hay, and concentrate (60% forage and 40% concentrate). Treatments consisted of oral doses of rumen-protected methionine (RPM) (0 and 1.5 g/day) and herbal choline (biocholine) (0 and 4 g/day) in a completely random block design with factorial arrangement of treatments, where lambs were blocked by sex. The experiment was conducted for 60 days, and measurements of live weight and dry matter intake were obtained. No effects of the treatments were observed on performance variables (lamb growth, consumption and feed conversion). Non-esterified fatty acids (NEFA) were increased by biocholine and unaffected by methionine (Met). Biocholine increased glucose and cholesterol, whereas methionine increased triglycerides, albumin and plasma protein. The dietary supplementation with biocholine and RPM did not improve lambs’ growth; however, biocholine and Met showed a lipotropic effect by mobilizing NEFA and stimulating glucose and cholestrol synthesis.Keywords: feed additives, growing sheep, lipid metabolis

Influence of the Delta Phase in the Microstructure of the Inconel 718 subjected to “Delta-processing” Heat Treatment and Hot Deformed

AbstractInconel 718 (IN718) is a nickel base alloy widely used in the aerospace industry due to its mechanical stability at elevated temperatures. Stable δ phase with acicular morphology weakens the IN718, however, it has been found that a spherical morphology distributed in the grain boundaries acts as an anchor preventing grain growth during hot deformation. The delta processing (DP718) is a saturation of δ phase in the alloy by thermal treatment followed by thermomechanical working to control the grain growth and morphology during deformation. Two specimens (A and B) of IN718 alloy were solubilized for 1h at 1100°C WQ and aging at 900°C for 24hWQ thermal treatment, following bythermomechanical deformation. Sample A was deformed at 0.001 s -1 and sample Bat 0.01 s-1, both deformations were carried out at 960°C and the final microstructures were characterized by optical microscopy and scanning electron microscopy (SEM) in order to evaluate morphology and grainsize distribution

Nature of the spin-glass phase at experimental length scales

We present a massive equilibrium simulation of the three-dimensional Ising spin glass at low temperatures. The Janus special-purpose computer has allowed us to equilibrate, using parallel tempering, L=32 lattices down to T=0.64 Tc. We demonstrate the relevance of equilibrium finite-size simulations to understand experimental non-equilibrium spin glasses in the thermodynamical limit by establishing a time-length dictionary. We conclude that non-equilibrium experiments performed on a time scale of one hour can be matched with equilibrium results on L=110 lattices. A detailed investigation of the probability distribution functions of the spin and link overlap, as well as of their correlation functions, shows that Replica Symmetry Breaking is the appropriate theoretical framework for the physically relevant length scales. Besides, we improve over existing methodologies to ensure equilibration in parallel tempering simulations.Comment: 48 pages, 19 postscript figures, 9 tables. Version accepted for publication in the Journal of Statistical Mechanic

Janus II: a new generation application-driven computer for spin-system simulations

This paper describes the architecture, the development and the implementation of Janus II, a new generation application-driven number cruncher optimized for Monte Carlo simulations of spin systems (mainly spin glasses). This domain of computational physics is a recognized grand challenge of high-performance computing: the resources necessary to study in detail theoretical models that can make contact with experimental data are by far beyond those available using commodity computer systems. On the other hand, several specific features of the associated algorithms suggest that unconventional computer architectures, which can be implemented with available electronics technologies, may lead to order of magnitude increases in performance, reducing to acceptable values on human scales the time needed to carry out simulation campaigns that would take centuries on commercially available machines. Janus II is one such machine, recently developed and commissioned, that builds upon and improves on the successful JANUS machine, which has been used for physics since 2008 and is still in operation today. This paper describes in detail the motivations behind the project, the computational requirements, the architecture and the implementation of this new machine and compares its expected performances with those of currently available commercial systems.Comment: 28 pages, 6 figure

Slow relaxation dynamics of clogs in a vibrated granular silo

We experimentally explore the vibration-induced unclogging of arches halting the flow in a two-dimensional silo. The endurance of arches is determined by carrying out a survival analysis of their breaking times. By analyzing the dynamics of two morphological variables, we demonstrate that arches evolve toward less regular structures and it seems that there may exist a certain degree of irregularity that the arch reaches before collapsing. Moreover, we put forward that ¿ (the standard deviation of all angles between consecutive beads) describes faithfully the morphological evolution of the arch. Focusing on long-lasting arches, we study ¿ calculating its two-time autocorrelation function and its mean-squared displacement. In particular, the apparent logarithmic increase of the correlation and the decrease of the mean-squared displacement of ¿ when the waiting time is increased reveal a slowing down of the dynamics. This behavior is a clear hallmark of aging phenomena and confirms the lack of ergodicity in the unclogging dynamics. Our findings provide new insights on how an arch tends to destabilize and how the probability that it breaks with a long sustained vibration decreases with time

New measurement of the 242Pu(n,γ) cross section at n-TOF-EAR1 for MOX fuels : Preliminary results in the RRR

The spent fuel of current nuclear reactors contains fissile plutonium isotopes that can be combined with 238U to make mixed oxide (MOX) fuel. In this way the Pu from spent fuel is used in a new reactor cycle, contributing to the long-term sustainability of nuclear energy. The use of MOX fuels in thermal and fast reactors requires accurate capture and fission cross sections. For the particular case of 242Pu, the previous neutron capture cross section measurements were made in the 70's, providing an uncertainty of about 35% in the keV region. In this context, the Nuclear Energy Agency recommends in its "High Priority Request List" and its report WPEC-26 that the capture cross section of 242Pu should be measured with an accuracy of at least 7-12% in the neutron energy range between 500 eV and 500 keV. This work presents a brief description of the measurement performed at n-TOF-EAR1, the data reduction process and the first ToF capture measurement on this isotope in the last 40 years, providing preliminary individual resonance parameters beyond the current energy limits in the evaluations, as well as a preliminary set of average resonance parameters

Time-of-flight and activation experiments on 147Pm and 171Tm for astrophysics

The neutron capture cross section of several key unstable isotopes acting as branching points in the s-process are crucial for stellar nucleosynthesis studies, but they are very challenging to measure due to the difficult production of sufficient sample material, the high activity of the resulting samples, and the actual (n,γ) measurement, for which high neutron fluxes and effective background rejection capabilities are required. As part of a new program to measure some of these important branching points, radioactive targets of 147Pm and 171Tm have been produced by irradiation of stable isotopes at the ILL high flux reactor. Neutron capture on 146Nd and 170Er at the reactor was followed by beta decay and the resulting matrix was purified via radiochemical separation at PSI. The radioactive targets have been used for time-of-flight measurements at the CERN n-TOF facility using the 19 and 185 m beam lines during 2014 and 2015. The capture cascades were detected using a set of four C6D6 scintillators, allowing to observe the associated neutron capture resonances. The results presented in this work are the first ever determination of the resonance capture cross section of 147Pm and 171Tm. Activation experiments on the same 147Pm and 171Tm targets with a high-intensity 30 keV quasi-Maxwellian flux of neutrons will be performed using the SARAF accelerator and the Liquid-Lithium Target (LiLiT) in order to extract the corresponding Maxwellian Average Cross Section (MACS). The status of these experiments and preliminary results will be presented and discussed as well

Measurement of the 240Pu(n,f) cross-section at the CERN n-TOF facility : First results from experimental area II (EAR-2)

The accurate knowledge of the neutron-induced fission cross-sections of actinides and other isotopes involved in the nuclear fuel cycle is essential for the design of advanced nuclear systems, such as Generation-IV nuclear reactors. Such experimental data can also provide the necessary feedback for the adjustment of nuclear model parameters used in the evaluation process, resulting in the further development of nuclear fission models. In the present work, the 240Pu(n,f) cross-section was measured at CERN's n-TOF facility relative to the well-known 235U(n,f) cross section, over a wide range of neutron energies, from meV to almost MeV, using the time-of-flight technique and a set-up based on Micromegas detectors. This measurement was the first experiment to be performed at n-TOF's new experimental area (EAR-2), which offers a significantly higher neutron flux compared to the already existing experimental area (EAR-1). Preliminary results as well as the experimental procedure, including a description of the facility and the data handling and analysis, are presented