140 research outputs found

    Estabilidad de pórticos 2D en régimen elastoplástico

    Get PDF
    AbstractThe evaluation of the maximum level of load that any 2D framed structure can undergo, before plastic collapse or buckling, is addressed in this paper. The analytical approach, based on a beam element with elastic behaviour except on its ends, uses an incremental approach to determine when changes appear due to plastic behaviour. When the combination of axial force and bending moment in any cross-section reaches the plastic function, that section is considered to yield suddenly and relative displacements can appear because of the yielding. The model includes the traditional plastic hinge, which only considers relative rotation due to the effect of the bending moment. The sequential loading and yielding reduces the stiffness and stability of the frame, which is computed and compared with the classic plastic methods of analysis

    Optimization of fourteen microsatellite loci in a Mediterranean demosponge subjected to population decimation, Ircinia fasciculata

    Get PDF
    The recovery potential of decimated populations of sponges will largely hinge on their populations' size retrieval and their connectivity with conspecifics in unaffected locations. Here, we report on the development of microsatellite markers for estimation of the population connectivity and bottleneck and inbreeding signals in a Mediterranean sponge suffering from disease outbreaks, Ircinia fasciculata. From the 220,876 sequences obtained by genomic pyrosequencing, we isolated 14 polymorphic microsatellite loci and assessed the allelic variation of loci in 24 individuals from 2 populations in the Northwestern Mediterranean. The allele number per locus ranged from 3 to 11, observed heterozygosity from 0.68 to 0.73, and expected heterozygosity from 0.667 to 0.68. No significant linkage disequilibrium between pairs of loci was detected. The 14 markers developed here will be valuable tools for conservation strategies across the distributional range of this species allowing the detection of populations with large genetic diversity loss and high levels of inbreeding

    A Modal-Based Partition of Unity Finite Element Method for Elastic Wave Propagation Problems in Layered Media

    Get PDF
    Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG[Abstract] The time-harmonic propagation of elastic waves in layered media is simulated numerically by means of a modal-based Partition of Unity Finite Element Method (PUFEM). Instead of using the standard plane waves or the Bessel solutions of the Helmholtz equation to design the discretization basis, the proposed modal-based PUFEM explicitly uses the tensor-product expressions of the eigenmodes (the so-called Love and interior modes) of a spectral elastic transverse problem, which fulfil the coupling conditions among layers. This modal-based PUFEM approach does not introduce quadrature errors since the coefficients of the discrete matrices are computed in closed-form. A preliminary analysis of the high condition number suffered by the proposed method is also analyzed in terms of the mesh size and the number of eigenmodes involved in the discretization. The numerical methodology is validated through a number of test scenarios, where the reliability of the proposed PUFEM method is discussed by considering different modal basis and source terms. Finally, some indicators are introduced to select a convenient discrete PUFEM basis taking into account the observability of cracks located on a coupling boundary between two adjacent layers.This work has been supported by Xunta de Galicia project “Numerical simulation of high-frequency hydro-acoustic problems in coastal environments - SIMNUMAR” (EM2013/052), co-funded with European Regional Development Funds (ERDF). Moreover, the second and fifth authors have been supported by MICINN projects MTM2014-52876-R, MTM2017-82724-R, PID2019-108584RB-I00, and also by ED431C 2018/33 - M2NICA (Xunta de Galicia & ERDF) and ED431G 2019/01 - CITIC (Xunta de Galicia & ERDF). Additionally, the third author has been supported by Junta de Castilla y León under projects VA024P17 and VA105G18, co-financed by ERDF funds. This work has been funded for open access charge by Universidade da Coruña/CISUGXunta de Galicia; EM2013/052Xunta de Galicia; ED431C 2018/33Xunta de Galicia; ED431G 2019/01Junta de Castilla y León; VA024P17Junta de Castilla y León; VA105G1

    An altered microbiota pattern precedes Type 2 diabetes mellitus development: From the CORDIOPREV study

    Get PDF
    Introduction. A distinctive gut microbiome have been linked to type 2 diabetes mellitus (T2DM). We aimed to evaluate whether gut microbiota composition, in addition to clinical biomarkers, could improve the prediction of new incident cases of diabetes in patients with coronary heart disease. Methods All the patients from the CORDIOPREV (Clinical Trials.gov.Identifier: NCT00924937) study without T2DM at baseline were included (n = 462). Overall, 107 patients developed it after a median of 60 months. The gut microbiota composition was determined by 16S rRNA gene sequencing and predictive models were created using hold-out method. Results. A gut microbiota profile associated with T2DM development was determined through a microbiome-based predictive model. The addition of microbiome data to clinical parameters (variables included in FINDRISC risk score and the diabetes risk score of the American Diabetes Association, HDL, triglycerides and HbA1c) improved the prediction increasing the area under the curve from 0.632 to 0.946. Furthermore, a microbiome-based risk score including the ten most discriminant genera, was associated with the probability of develop T2DM. Conclusión. These results suggest that a microbiota profile is associated to the T2DM development. An integrate predictive model of microbiome and clinical data that can improve the prediction of T2DM is also proposed, if is validated in independent populations to prevent this disease

    Compilation of parameterized seismogenic sources in Iberia for the SHARE European-scale seismic source model.

    Get PDF
    Abstract: SHARE (Seismic Hazard Harmonization in Europe) is an EC-funded project (FP7) that aims to evaluate European seismic hazards using an integrated, standardized approach. In the context of SHARE, we are compiling a fully-parameterized active fault database for Iberia and the nearby offshore region. The principal goal of this initiative is for fault sources in the Iberian region to be represented in SHARE and incorporated into the source model that will be used to produce seismic hazard maps at the European scale. The SHARE project relies heavily on input from many regional experts throughout the Euro-Mediterranean region. At the SHARE regional meeting for Iberia, the 2010 Working Group on Iberian Seismogenic Sources (WGISS) was established; these researchers are contributing to this large effort by providing their data to the Iberian regional integrators in a standardized format. The development of the SHARE Iberian active fault database is occurring in parallel with IBERFAULT, another ongoing effort to compile a database of active faults in the Iberian region. The SHARE Iberian active fault database synthesizes a wide range of geological and geophysical observations on active seismogenic sources, and incorporates existing compilations (e.g., Cabral, 1995; Silva et al., 2008), original data contributed directly from researchers, data compiled from the literature, parameters estimated using empirical and analytical relationships, and, where necessary, parameters derived using expert judgment. The Iberian seismogenic source model derived for SHARE will be the first regional-scale source model for Iberia that includes fault data and follows an internationally standardized approach (Basili et al., 2008; 2009). This model can be used in both seismic hazard and risk analyses and will be appropriate for use in Iberian- and European-scale assessments

    Effectiveness and safety of first-generation protease inhibitors in clinical practice: Hepatitis C virus patients with advanced fibrosis

    Get PDF
    AIM: To evaluates the effectiveness and safety of the first generation, NS3/4A protease inhibitors (PIs) in clinical practice against chronic C virus, especially in patients with advanced fibrosis. METHODS: Prospective study and non-experimental analysis of a multicentre cohort of 38 Spanish hospitals that includes patients with chronic hepatitis C genotype 1, treatment-nai¨ve (TN) or treatment-experienced (TE), who underwent triple therapy with the first generation NS3/4A protease inhibitors, boceprevir (BOC) and telaprevir (TVR), in combination with pegylated interferon and ribavirin. The patients were treatment in routine practice settings. Data on the study population and on adverse clinical and virologic effects were compiled during the treatment period and during follow up. RESULTS: One thousand and fifty seven patients were included, 405 (38%) were treated with BOC and 652 (62%) with TVR. Of this total, 30% (n = 319) were TN and the remaining were TE: 28% (n = 298) relapsers, 12% (n = 123) partial responders (PR), 25% (n = 260) null-responders (NR) and for 5% (n = 57) with prior response unknown. The rate of sustained virologic response (SVR) by intention-to-treatment (ITT) was greater in those treated with TVR (65%) than in those treated with BOC (52%) (P < 0.0001), whereas by modified intention-to-treatment (mITT) no were found significant differences. By degree of fibrosis, 56% of patients were F4 and the highest SVR rates were recorded in the non-F4 patients, both TN and TE. In the analysis by groups, the TN patients treated with TVR by ITT showed a higher SVR (P = 0.005). However, by mITT there were no significant differences between BOC and TVR. In the multivariate analysis by mITT, the significant SVR factors were relapsers, IL28B CC and non-F4; the type of treatment (BOC or TVR) was not significant. The lowest SVR values were presented by the F4-NR patients, treated with BOC (46%) or with TVR (45%). 28% of the patients interrupted the treatment, mainly by non-viral response (51%): this outcome was more frequent in the TE than in the TN patients (57% vs 40%, P = 0.01). With respect to severe haematological disorders, neutropaenia was more likely to affect the patients treated with BOC (33% vs 20%, P = 0.0001), and thrombocytopaenia and anaemia, the F4 patients (P = 0.000, P = 0.025, respectively). CONCLUSION: In a real clinical practice setting with a high proportion of patients with advanced fibrosis, effectiveness of first-generation PIs was high except for NR patients, with similar SVR rates being achieved by BOC and TVR

    Anisotropic flow of charged hadrons, pions and (anti-)protons measured at high transverse momentum in Pb-Pb collisions at sNN=2.76\sqrt{s_{\rm NN}}=2.76 TeV

    Get PDF
    The elliptic, v2v_2, triangular, v3v_3, and quadrangular, v4v_4, azimuthal anisotropic flow coefficients are measured for unidentified charged particles, pions and (anti-)protons in Pb-Pb collisions at sNN=2.76\sqrt{s_{\rm NN}} = 2.76 TeV with the ALICE detector at the Large Hadron Collider. Results obtained with the event plane and four-particle cumulant methods are reported for the pseudo-rapidity range η<0.8|\eta|<0.8 at different collision centralities and as a function of transverse momentum, pTp_{\rm T}, out to pT=20p_{\rm T}=20 GeV/cc. The observed non-zero elliptic and triangular flow depends only weakly on transverse momentum for pT>8p_{\rm T}>8 GeV/cc. The small pTp_{\rm T} dependence of the difference between elliptic flow results obtained from the event plane and four-particle cumulant methods suggests a common origin of flow fluctuations up to pT=8p_{\rm T}=8 GeV/cc. The magnitude of the (anti-)proton elliptic and triangular flow is larger than that of pions out to at least pT=8p_{\rm T}=8 GeV/cc indicating that the particle type dependence persists out to high pTp_{\rm T}.Comment: 16 pages, 5 captioned figures, authors from page 11, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/186

    Centrality dependence of charged particle production at large transverse momentum in Pb-Pb collisions at sNN=2.76\sqrt{s_{\rm{NN}}} = 2.76 TeV

    Get PDF
    The inclusive transverse momentum (pTp_{\rm T}) distributions of primary charged particles are measured in the pseudo-rapidity range η<0.8|\eta|<0.8 as a function of event centrality in Pb-Pb collisions at sNN=2.76\sqrt{s_{\rm{NN}}}=2.76 TeV with ALICE at the LHC. The data are presented in the pTp_{\rm T} range 0.15<pT<500.15<p_{\rm T}<50 GeV/cc for nine centrality intervals from 70-80% to 0-5%. The Pb-Pb spectra are presented in terms of the nuclear modification factor RAAR_{\rm{AA}} using a pp reference spectrum measured at the same collision energy. We observe that the suppression of high-pTp_{\rm T} particles strongly depends on event centrality. In central collisions (0-5%) the yield is most suppressed with RAA0.13R_{\rm{AA}}\approx0.13 at pT=6p_{\rm T}=6-7 GeV/cc. Above pT=7p_{\rm T}=7 GeV/cc, there is a significant rise in the nuclear modification factor, which reaches RAA0.4R_{\rm{AA}} \approx0.4 for pT>30p_{\rm T}>30 GeV/cc. In peripheral collisions (70-80%), the suppression is weaker with RAA0.7R_{\rm{AA}} \approx 0.7 almost independently of pTp_{\rm T}. The measured nuclear modification factors are compared to other measurements and model calculations.Comment: 17 pages, 4 captioned figures, 2 tables, authors from page 12, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/284
    corecore