334 research outputs found
Human System Modeling for Optimum Labor Utilization and Man-Machine Configuration
Manufacturing organization with increased in the organizational complexity, is facing difficulty in measuring its performance. Various factors could affect manufacturing performance such as equipment performance, material planning and human resources. In this paper, focus was given primarily on the human resource which was considered as an important factor of the simulation model development to achieve optimum utilization and ensure efficient operator allocation to the machines. Static modeling was performed to capture all the critical factors contributing to the work such as the operator activity sequence, the time value for each activity and also the machine process time for each batch of product. A dynamic model was then developed to enable quantitative analysis in the optimization of human system performance. This paper illustrates the application of different modeling approaches to demonstrate advantages gained in the process of evaluating human system performance
The application of expert system:a review of research and applications
The development of Artificial Intelligent (AI) technology system can be a wide scope; for an instant, there are rule-based expert system, frame-based expert system, fuzzy logic, neural network, genetic algorithm, etc. The remarkable achievement applications of AI has been reported in different disciplines including field of medicals, militaries, chemistry, engineering, manufacturing, management, and others. Its' discoveries and contributions through of AI study since the early 1970s were be significant step to enhance better performance of human work activities and probably replaced by these technologies. Today, there a lot of intelligent machine is available in everywhere such as airport gate scanner, movie theater counter ticket, vending machine, ATM machine, washing machine, etc. Expert system has been used widely in many areas and industries. This paper is described the current research and development of expert system.</p
Preliminary investigations of the endoparasite component communities of stray cats from Kuala Lumpur
Investigations into the endoparasite fauna
of
stray
cats
from
Kuala
Lumpur
were
carried
out
to
determine
the
present
population
and diversity. Post-mortem examinations of selected organ from 85 cats revealed that 87.1% cats harbored endoparasites, with an average of 36.65 worms per infected cat. Endoparasite recovered consists of five nematode species (Toxocara catti, Toxocara malayensis, Ancylostoma ceylanicum, Ancylostoma braziiiensie and Strongyloides sp.), two cestode species (Dipylidium caninum and Taenia taeniaformis) and one trematode species (Platynosomum fastosum). Toxocara sp. was shown to have the highest prevalence and mean intensity values. Present observations provided additional insights to the environment, behavior and diet of the local strays. Ancylostoma ceylanicum, Ancylostoma broziliensie, Toxocara catti and Dipylidium caninum are known to be of medical significance
Conceptual Design for Multi Terrain Mobile Robot
This paper presents the conceptual design of the multi terrain mobile robot with total design approach. Twenty conceptual designs were generated for selection purpose.
To determine the final design of multi terrain mobile robot, the matrix evaluation method was used. The weight of the concept was obtained through weighted analysis. The final design of the multi terrain mobile robot is the mobile robot with six independent motorized wheels. The mobile robot has a steering wheel in the front and the rear, and two wheels arranged on a bogie on each side. Each wheel can operate separately on different type of terrain. Twenty conceptual designs were generated for selection. To determine the final design of multi terrain mobile robot,the matrix evaluation method was used. The weight of the concept was obtained
through weight analysis
A knowledge-based architecture framework of design for assemble system (DAEx)
Malaysian manufacturing sector has played an important role to boost up the economy at the domestic market. Today, the Malaysian manufacturing sector has facing the challenges that the manufacturing industry need to stay competitive to compete at the global market. Manufacturing cost of the company will directly effect on the company profit as well as product cost. Manufacturing cost may include material cost, labor cost and overhead. Various type of techniques and methods have been used to lower the manufacturing cost. With the advancement of computer, computer software has been used to solve the manufacturing sector problem. In this research, expert system has been proposed to develop a diagnosis system to solve the problem of design of assemble. The effective assembly design of a product will able to reduce the total assembly time as well as reduce the manufacturing cost. An architecture framework of the developed Design for Assemble Expert system (DAEx) is described. The DFA expert system is developed using expert system shell to support the vehicle seat manufacturing process. The main aim is to reduce the assembly time and cost of vehicle seat manufacturing process.</p
Conceptual design of cantilever support for long haul bus passenger seat
This paper describes the conceptual design of cantilever support for long haul bus passenger seat. The advantages of cantilever bus seat structure is light weight, the luggage can be put under the seat and it is easy for floor cleanup. The total design technique was used to develop the cantilever support. Market survey was conducted to study on current available cantilever supported vehicle seat. After that, product requirement of cantilever design is defined. Next, brainstorming technique was used to generate the preliminary concept of cantilever design. Six conceptual designs were generated for selection. The matrix evaluation method was used to determine the final design of cantilever design. The weight of the concept was obtained through weighted analysis. Lastly, the final concept will be fabricated as prototype for further validation purpose
Ectoparasites of murids in peninsular Malaysia and their associated diseases
A considerable number of rat-borne ectoparasite studies have been conducted since the early 1930s in the Malayan Peninsula (now known as peninsular Malaysia). The majority of studies were field surveys and collections of specimens across the region, and were conducted primarily to catalogue the ectoparasite host distribution and discover novel species. This has generated a signification amount of information, particularly on the diversity and host distribution; other aspects such as morphology, host distribution and medical significance have also been investigated. Amongst the four main groups (mites, fleas, ticks, lice), rat-borne mites have received the most attention with a particular emphasis on chiggers, due to their medical importance. More recent studies have examined the distribution of ectoparasites in rats from different habitat type simplicating a high prevalence of zoonotic species infesting rat populations. Despite being capable of transmitting dangerous pathogens to human, the health risks of rat-borne ectoparasites appear to be small with no serious outbreaks of diseases recorded. Although an extensive number of works have been published, there remain gaps in knowledge that need to be addressed, such as, the distribution of under studied ectoparasite groups (listrophorids and myobiids), determining factors influencing infestation, and understanding changes to the population distribution over time
Pharmacotherapeutic management of paediatric heart failure and ACE-I use patterns: A European survey
Objective To characterise heart failure (HF) maintenance
pharmacotherapy for children across Europe and
investigate how angiotensin-converting enzyme inhibitors
(ACE-I) are used in this setting.
Methods A Europe-wide web-based survey was
conducted between January and May 2015 among
European paediatricians dedicated to cardiology.
Results Out of 200-eligible, 100 physicians representing
100 hospitals in 27 European countries participated. All
participants reported prescribing ACE-I to treat dilated
cardiomyopathy-related HF and 97% in the context of
congenital heart defects; 87% for single ventricle physiology.
Twenty-six per cent avoid ACE-I i
Search for displaced vertices arising from decays of new heavy particles in 7 TeV pp collisions at ATLAS
We present the results of a search for new, heavy particles that decay at a
significant distance from their production point into a final state containing
charged hadrons in association with a high-momentum muon. The search is
conducted in a pp-collision data sample with a center-of-mass energy of 7 TeV
and an integrated luminosity of 33 pb^-1 collected in 2010 by the ATLAS
detector operating at the Large Hadron Collider. Production of such particles
is expected in various scenarios of physics beyond the standard model. We
observe no signal and place limits on the production cross-section of
supersymmetric particles in an R-parity-violating scenario as a function of the
neutralino lifetime. Limits are presented for different squark and neutralino
masses, enabling extension of the limits to a variety of other models.Comment: 8 pages plus author list (20 pages total), 8 figures, 1 table, final
version to appear in Physics Letters
Measurement of the polarisation of W bosons produced with large transverse momentum in pp collisions at sqrt(s) = 7 TeV with the ATLAS experiment
This paper describes an analysis of the angular distribution of W->enu and
W->munu decays, using data from pp collisions at sqrt(s) = 7 TeV recorded with
the ATLAS detector at the LHC in 2010, corresponding to an integrated
luminosity of about 35 pb^-1. Using the decay lepton transverse momentum and
the missing transverse energy, the W decay angular distribution projected onto
the transverse plane is obtained and analysed in terms of helicity fractions
f0, fL and fR over two ranges of W transverse momentum (ptw): 35 < ptw < 50 GeV
and ptw > 50 GeV. Good agreement is found with theoretical predictions. For ptw
> 50 GeV, the values of f0 and fL-fR, averaged over charge and lepton flavour,
are measured to be : f0 = 0.127 +/- 0.030 +/- 0.108 and fL-fR = 0.252 +/- 0.017
+/- 0.030, where the first uncertainties are statistical, and the second
include all systematic effects.Comment: 19 pages plus author list (34 pages total), 9 figures, 11 tables,
revised author list, matches European Journal of Physics C versio
- âŠ