The efficacy and safety of Baoji Tablets for treating common cold with summer-heat and dampness syndrome: study protocol for a randomized controlled trial

BACKGROUND: Despite the high incidence and the economic impact of the common cold, there are still no effective therapeutic options available. Although traditional Chinese medicine (TCM) is widely used in China to treat the common cold, there is still a lack of high-quality clinical trials. This article sets forth the protocol for a high-quality trial of a new TCM drug, Baoji Tablets, which is designed to treat the common cold with summer-heat and dampness syndrome (CCSDS). The trial is evaluating both the efficacy and safety of Baoji Tablets. METHODS/DESIGN: This study is designed as a multicenter, phase II, parallel-group, double-blind, double-dummy, randomized and placebo-controlled trial. A total of 288 patients will be recruited from four centers. The new tablets group are administered Baoji Tablets 0.9 g and dummy Baoji Pills 3.7 g. The old pills group are administered dummy Baoji Tablets 0.9 g and Baoji Pills 3.7 g. The placebo control group are administered dummy Baoji Tablets 0.9 g and dummy Baoji Pills 3.7 g. All drugs are taken three times daily for 3 days. The primary outcome is the duration of all symptoms. Secondary outcomes include the duration of primary and secondary symptoms, changes in primary and secondary symptom scores and cumulative symptom score at day 4, as well as an evaluation of treatment efficacy. DISCUSSION: This is the first multicenter, double-blind, double-dummy, randomized and placebo-controlled trial designated to treat CCSDS in an adult population from China. It will establish the basis for a scientific and objective assessment of the efficacy and safety of Baoji Tablets for treating CCSDS, and provide evidence for a phase III clinical trial. TRIAL REGISTRATION: This study is registered with the Chinese Clinical Trial Registry. The registration number is ChiCTR-TRC-13003197

The CDEX-1 1 kg Point-Contact Germanium Detector for Low Mass Dark Matter Searches

The CDEX Collaboration has been established for direct detection of light dark matter particles, using ultra-low energy threshold p-type point-contact germanium detectors, in China JinPing underground Laboratory (CJPL). The first 1 kg point-contact germanium detector with a sub-keV energy threshold has been tested in a passive shielding system located in CJPL. The outputs from both the point-contact p+ electrode and the outside n+ electrode make it possible to scan the lower energy range of less than 1 keV and at the same time to detect the higher energy range up to 3 MeV. The outputs from both p+ and n+ electrode may also provide a more powerful method for signal discrimination for dark matter experiment. Some key parameters, including energy resolution, dead time, decay times of internal X-rays, and system stability, have been tested and measured. The results show that the 1 kg point-contact germanium detector, together with its shielding system and electronics, can run smoothly with good performances. This detector system will be deployed for dark matter search experiments.Comment: 6 pages, 8 figure

JUNO Conceptual Design Report

The Jiangmen Underground Neutrino Observatory (JUNO) is proposed to determine the neutrino mass hierarchy using an underground liquid scintillator detector. It is located 53 km away from both Yangjiang and Taishan Nuclear Power Plants in Guangdong, China. The experimental hall, spanning more than 50 meters, is under a granite mountain of over 700 m overburden. Within six years of running, the detection of reactor antineutrinos can resolve the neutrino mass hierarchy at a confidence level of 3-4$\sigma$, and determine neutrino oscillation parameters $\sin^2\theta_{12}$, $\Delta m^2_{21}$, and $|\Delta m^2_{ee}|$ to an accuracy of better than 1%. The JUNO detector can be also used to study terrestrial and extra-terrestrial neutrinos and new physics beyond the Standard Model. The central detector contains 20,000 tons liquid scintillator with an acrylic sphere of 35 m in diameter. $\sim$17,000 508-mm diameter PMTs with high quantum efficiency provide $\sim$75% optical coverage. The current choice of the liquid scintillator is: linear alkyl benzene (LAB) as the solvent, plus PPO as the scintillation fluor and a wavelength-shifter (Bis-MSB). The number of detected photoelectrons per MeV is larger than 1,100 and the energy resolution is expected to be 3% at 1 MeV. The calibration system is designed to deploy multiple sources to cover the entire energy range of reactor antineutrinos, and to achieve a full-volume position coverage inside the detector. The veto system is used for muon detection, muon induced background study and reduction. It consists of a Water Cherenkov detector and a Top Tracker system. The readout system, the detector control system and the offline system insure efficient and stable data acquisition and processing.Comment: 328 pages, 211 figure

Pressure-stabilized divalent ozonide CaO3 and its impact on Earth's oxygen cycles.

High pressure can drastically alter chemical bonding and produce exotic compounds that defy conventional wisdom. Especially significant are compounds pertaining to oxygen cycles inside Earth, which hold key to understanding major geological events that impact the environment essential to life on Earth. Here we report the discovery of pressure-stabilized divalent ozonide CaO3 crystal that exhibits intriguing bonding and oxidation states with profound geological implications. Our computational study identifies a crystalline phase of CaO3 by reaction of CaO and O2 at high pressure and high temperature conditions; ensuing experiments synthesize this rare compound under compression in a diamond anvil cell with laser heating. High-pressure x-ray diffraction data show that CaO3 crystal forms at 35 GPa and persists down to 20 GPa on decompression. Analysis of charge states reveals a formal oxidation state of -2 for ozone anions in CaO3. These findings unravel the ozonide chemistry at high pressure and offer insights for elucidating prominent seismic anomalies and oxygen cycles in Earth's interior. We further predict multiple reactions producing CaO3 by geologically abundant mineral precursors at various depths in Earth's mantle

Efficient and durable uranium extraction from uranium mine tailings seepage water via a photoelectrochemical method

Current photocatalytic uranium (U) extraction methods have intrinsic obstacles, such as the recombination of charge carriers, and the deactivation of catalysts by extracted U. Here we show that, by applying a bias potential on the photocatalyst, the photoelectrochemical (PEC) method can address these limitations. We demonstrate that, owing to efficient spatial charge-carriers separation driven by the applied bias, the PEC method enables efficient and durable U extraction. The effects of multiple operation conditions are investigated. The U extraction proceeds via single-step one-electron reduction, resulting in the formation of pentavalent U, which can facilitate future studies on this often-overlooked U species. In real seepage water the PEC method achieves an extraction capacity of 0.67 gU m(-3).h(-1) without deactivation for 156 h continuous operation, which is 17 times faster than the photocatalytic method. This work provides an alternative tool for U resource recovery and facilitates future studies on U(V) chemistry

In Vivo Bioassay of Recombinant Human Growth Hormone Synthesized in B. mori Pupae

The human growth hormone (hGH) has been expressed in prokaryotic expression system with low bioactivity previously. Then the effective B. mori baculovirus system was employed to express hGH identical to mature hGH successfully in larvae, but the expression level was still limited. In this work, the hGH was expressed in B. mori pupae by baculovirus system. Quantification of recombinant hGH protein (BmrhGH) showed that the expression of BmrhGH reached the level of approximately 890 μg/mL pupae supernatant solution, which was five times more than the level using larvae. Furthermore, Animals were gavaged with BmrhGH at the dose of 4.5 mg/rat.day, and the body weight gain (BWG) of treated group had a significant difference (P < .01) compared with the control group. The other two parameters of liver weight and epiphyseal width were also found to be different between the two groups (P < .05). The results suggested that BmrhGH might be used as a protein drug by oral administration

Tolerancija imobiliziranih stanica kvasca prema ionskim tekućinama na bazi imidazola

Ionic liquids (ILs) are considered as another ’green solvent’, after the supercritical carbon dioxide. They are a promising reaction medium for biocatalysis process. The tolerance of active cells in hydrophobic imidazolium-based ILs (1-R-3-methylimidazolium hexafluorophosphate, [RMim][PF6]) has been studied in this work. Calcium-alginate-entrapped baker’s yeast has been chosen as the model of living cells. The results show that this kind of ILs possess a certain degree of biocompatibility. The tolerance of yeast cells to the ILs decreases with the increase of the R chain length of these ILs. The experiment indicated that 1-butyl-3-methylimidazolium hexafluorophosphate ([BMim][PF6]) possessed excellent biocompatibility compared to the other imidazolium-based ILs. The moisture content in the ILs was the key factor that affected the tolerance. The activity retention of yeast cells pretreated with [BMim][PF6] saturated with water and aqueous [BMim][PF6] biphasic system was about 70 %, but it was only 50 % with the anhydrous [BMim][PF6]. Although the yeast cells were pretreated with [BMim][PF6] for 24 h, the activity retention was up to 45 %. The yeast cells had around 50 % activity after being pretreated 4 times with [BMim][PF6]. This shows that the water immiscible ILs possess good biocompatibility, and they are suitable for application as the reaction medium catalyzed by living cells.Ionske tekućine, a i superkritični ugljikov dioksid, smatraju se ekološki prihvatljivim otapalima. Mogu se upotrijebiti kao reagens u biokatalitičkim reakcijama. U ovom je radu ispitana tolerancija aktivnih stanica kvasca prema hidrofobnim ionskim tekućinama na bazi imidazola (1-R-3-metilimidazolijev heksafluorofosfat, [RMim][PF6]). Kao model živih stanica upotrijebljene su stanice pekarskog kvasca imobilizirane u kalcijevom alginatu. Rezultati su pokazali da ispitane ionske tekućine imaju određeni stupanj biokompatibilnosti. Tolerancija stanica kvasca prema ispitanim tekućinama smanjivala se s porastom duljine alkilnog lanca (R). Utvrđeno je da 1-butil-3-metilimidazolijev heksafluorofosfat ([BMim][PF6]), u usporedbi s drugim ionskim tekućinama na bazi imidazola, ima odličnu biokompatibilnost. Pri tome važnu ulogu ima udio vode u ionskoj tekućini. Stanice kvasca obrađene s [BMim][PF6] zasićenim vodom ili s vodenim dvofaznim sustavom [BMim][PF6] zadržale su i do 70 % svoje aktivnosti, a one tretirane s bezvodnim [BMim][PF6] imale su samo 50 %-tnu aktivnost. Stanice su kvasca čak i nakon 24-satne obrade s [BMim][PF6] zadržale do 45 % aktivnosti. Nakon 4 tretmana s [BMim][PF6] stanice su i dalje zadržale aktivnost od otprilike 50 %. To potvrđuje da ionske tekućine koje se miješaju s vodom imaju dobru biokompatibilnost i da se mogu primijeniti kao reagens u reakcijama kataliziranima s pomoću živih stanica kvasca

Graphene-Based Nanocomposites for Energy Storage

Since the first report of using micromechanical cleavage method to produce graphene sheets in 2004, graphene/graphene-based nanocomposites have attracted wide attention both for fundamental aspects as well as applications in advanced energy storage and conversion systems. In comparison to other materials, graphene-based nanostructured materials have unique 2D structure, high electronic mobility, exceptional electronic and thermal conductivities, excellent optical transmittance, good mechanical strength, and ultrahigh surface area. Therefore, they are considered as attractive materials for hydrogen (H2) storage and high-performance electrochemical energy storage devices, such as supercapacitors, rechargeable lithium (Li)-ion batteries, Li–sulfur batteries, Li–air batteries, sodium (Na)-ion batteries, Na–air batteries, zinc (Zn)–air batteries, and vanadium redox flow batteries (VRFB), etc., as they can improve the efficiency, capacity, gravimetric energy/power densities, and cycle life of these energy storage devices. In this article, recent progress reported on the synthesis and fabrication of graphene nanocomposite materials for applications in these aforementioned various energy storage systems is reviewed. Importantly, the prospects and future challenges in both scalable manufacturing and more energy storage-related applications are discussed