Curved-Tip Disposable Injector (OUReP Injector) to Insert Photoelectric Dye-Coupled Polyethylene Film (OUReP) as Retinal Prosthesis into Subretinal Space of Rabbit Eyes

The photoelectric dye-coupled thin polyethylene film functions as a novel type of retinal prosthesis in subretinal space of the eye. We previously reported a novel disposable injector to insert the thin film into subretinal space of the rabbit eye by vitreous surgery. The injection system composed of two separate parts, injector and loader. A circular film in 5 mm to 10 mm diameter was pulled into a transparent tube of the loader with a commercial 25-gauge forceps. The loader tube was joined with a sleeve to tube tip of the injector. The film in the loader was pushed with a plunger for the loader into the injector tube tip. The loader with the sleeve was removed from the injector tip, and the tube tip with the film was filled with solution. This study reported a small-bore curved-tip disposable injector with outer diameter of 1.6 mm. A curved-tip polypropylene tube was formed by the process of heating and cooling of the tube inserted with a curved guide wire. The plunger for the curved-tip tube was made of a polyphenylsulfone tip connected with a press-fitting inner polypropylene tube to a nylon rod. Bleb retinal detachment in 4 surgically aphakic eyes of rabbits were induced by infusing solution into subretinal space with a 38-gauge polyimide tip, and a retinal tear was made at the edge of retinal detachment with 25-gauge diathermy. The injector tip with the rolled film in 6 mm diameter was inserted from 2 mm wide scleral incision into vitreous and then into subretinal space. The rolled films were released into subretinal space with the tip end inserted into the retinal tear, and the released films were confirmed to stay under the retina with no additional aid. Dissection one month after surgeries confirmed successful implantation of 4 films into subretinal space of each rabbit eye. The curved-tip injector could release the rolled film into the subretinal space without additional effort, compared with the straight-tip injector, and would help surgeons implant photoelectric dye-coupled thin film retinal prosthesis easily at vitreous surgery

Follow-up with serum IgG4-monitoring in 8 patients with IgG4-related disease diagnosed by a lacrimal gland mass

The diagnostic criteria for IgG4-related disease were previously published and serum IgG4 measurement has been reimbursed by national health insurance in Japan since 2012. Eight patients diagnosed with IgG4-related disease based on lacrimal gland masses were retrospectively reviewed. The 8 patients were 3 men and 5 women ranging in age from 52 to 77 (median, 63) years at the initial visit and their follow-up period ranged from 0.25 to 11 (median, 7) years. Bilateral and unilateral involvement were noted in 4 patients each; 2 on the right side and 2 on the left side in those with unilateral involvement. Serum IgG4 was high in 5 of 8 patients at the initial visit. Five patients with no systemic signs were followed without treatment, whereas oral steroids were administered and tapered in the other 3 patients who exhibited systemic signs. One patient with a history of radiation for MALT lymphoma in bilateral lacrimal glands developed IgG4-related disease in the left lacrimal gland 10 years later and was followed without treatment. Nine years later, her serum IgG4 level increased to 1500 mg/dL and paracardiac lesions, found on positron emission tomography, were confirmed to be MALT lymphoma by needle biopsy, leading to systemic chemotherapy. The other 7 patients had neither local recurrence nor additional systemic signs. Serum IgG4 monitoring may be useful to detect systemic complications in IgG4-related ophthalmic disease and markedly high serum IgG4 levels may indicate new lymphoma at other sites

カフェイン酸フェネチルエステル（CAPE）がラット象牙芽細胞様細胞のVEGF発現と産生に与える影響

Caffeic acid phenethyl ester (CAPE), the main component of propolis, has various biological activities including anti-inflammatory effect and wound healing promotion. Odontoblasts located in the outermost layer of dental pulp play crucial roles such as production of growth factors and formation of hard tissue termed reparative dentin in host defense against dental caries. In this study, we investigated the effects of CAPE on the upregulation of vascular endothelial growth factor (VEGF) and calcification activities of odontoblasts, leading to development of novel therapy for dental pulp inflammation caused by dental caries. CAPE significantly induced mRNA expression and production of VEGF in rat clonal odontoblast-like KN-3 cells cultured in normal medium or osteogenic induction medium. CAPE treatment enhanced nuclear factor-kappa B (NF-κB) transcription factor activation, and furthermore, the specific inhibitor of NF-κB significantly reduced VEGF production. The expression of VEGF receptor- (VEGFR-) 2, not VEGFR-1, was up regulated in KN-3 cells treated with CAPE. In addition, VEGF significantly increased mineralization activity in KN-3 cells. These findings suggest that CAPE might be useful as a novel biological material for the dental pulp conservative therapy

Odontoblasts in dental pulp innate immunity

Odontoblasts located in the outermost layer of dental pulp form a natural barrier between mineralized tissues, dentin, and soft tissues, dental pulp, of the vital tooth, and they first recognize caries-related pathogens and sense external irritations. Therefore, odontoblasts possess a specialized innate immune system to fight oral pathogens invading into dentin. Generally, the rapid initial sensing of microbial pathogens, especially pathogen-associated molecular patterns (PAMPs) shared by microorganisms, are mediated by pattern recognition receptors (PRRs), such as Toll-like receptor and the nucleotide-binding oligomerization domain (NOD). The innate immune responses in odontoblasts initiated by sensing oral pathogens provide host protective events, such as inflammatory reactions, to produce a variety of pro-inflammatory mediators, including chemokines and cytokines. These attract various inflammatory cells and cause antibacterial reactions, such as the production of defensins, to kill microorganisms in the proximal region of the odontoblast layer. This review focuses on innate immunity, especially cellular and molecular mechanisms regarding the sensing of PAMPs from oral pathogens by PRRs, in odontoblasts and provides information for future studies for the development of novel therapeutic strategies, including diagnosis and treatment, to prevent exceeding dental pulp inflammation and preserve the dental pulp tissues

Oligomerization mechanism of tea catechins during tea roasting

Roasting of green tea causes oligomerization of tea catechins, which decreases the astringency. The aim of this study was to elucidate the oligomerization mechanism. The 13C NMR spectrum of the oligomer fraction showed signals arising from catechin and sugar residues. Heating of epigallocatechin-3-O-gallate with 13C-labeled glucose (150 °C for 2 h) suggested that condensation of sugars with catechin A-rings caused the oligomerization. The dimeric product obtained by heating for a shorter period (30 min)suggested cross-linking occurred between sugars and catechin A-rings. Furthermore, heating of phloroglucinol, a catechin A-ring mimic, with glucose, methylglyoxal, and dihydroxyacetone, confirmed that the basic mechanism included reaction of the catechin A-ring methine carbons with carbonyl carbons of glucose and their pyrolysis products

Characterization of a modular enzyme of exo-1,5-α-l-arabinofuranosidase and arabinan binding module from Streptomyces avermitilis NBRC14893

A gene encoding an α-l-arabinofuranosidase, designated SaAraf43A, was cloned from Streptomyces avermitilis. The deduced amino acid sequence implies a modular structure consisting of an N-terminal glycoside hydrolase family 43 module and a C-terminal family 42 carbohydrate-binding module (CBM42). The recombinant enzyme showed optimal activity at pH 6.0 and 45°C and was stable over the pH range of 5.0–6.5 at 30°C. The enzyme hydrolyzed p-nitrophenol (PNP)-α-l-arabinofuranoside but did not hydrolyze PNP-α-l-arabinopyranoside, PNP-β-d-xylopyranoside, or PNP-β-d-galactopyranoside. Debranched 1,5-arabinan was hydrolyzed by the enzyme but arabinoxylan, arabinogalactan, gum arabic, and arabinan were not. Among the synthetic regioisomers of arabinofuranobiosides, only methyl 5-O-α-l-arabinofuranosyl-α-l-arabinofuranoside was hydrolyzed by the enzyme, while methyl 2-O-α-l-arabinofuranosyl-α-l-arabinofuranoside and methyl 3-O-α-l-arabinofuranosyl-α-l-arabinofuranoside were not. These data suggested that the enzyme only cleaves α-1,5-linked arabinofuranosyl linkages. The analysis of the hydrolysis product of arabinofuranopentaose suggested that the enzyme releases arabinose in exo-acting manner. These results indicate that the enzyme is definitely an exo-1,5-α-l-arabinofuranosidase. The C-terminal CBM42 did not show any affinity for arabinogalactan and debranched arabinan, although it bound arabinan and arabinoxylan, suggesting that the CBM42 bound to branched arabinofuranosyl residues. Removal of the module decreased the activity of the enzyme with regard to debranched arabinan. The CBM42 plays a role in enhancing the debranched arabinan hydrolytic action of the catalytic module in spite of its preference for binding arabinofuranosyl side chains

A Report on Overseas Teaching Practicum by Graduate Students in Elementary/Secondary Schools in the United States (Ⅶ)

The present reports is on the 7th overseas teaching practicum in the United States by 15 graduate students of Hiroshima University, Japan, partly organized by Hiroshima University Global Partnership School Center since 2007. The group was comprised of 13 elementary school and 2 secondary school education major graduate students. They planned and conducted lessons in English in three local public schools in North Carolina. The expected outcomes of this project were: 1) to self-develop practical instructional competence by teaching pupils with diverse backgrounds in the U.S.; 2) to enhance the abilities in developing teaching materials through hands-on teaching experiences in English; and 3) to acquire the abilities to design, implement and evaluate programs for promoting global partnership. In addition, the teaching experience was followed by cross-cultural study visits to Raleigh, NC and Washington, D.C. It helped to boost our group motivation that the local media, newspaper and TV, and the city Board of Education covered our visit. It is hoped that this project will enhance the students’ teaching competence in designing quality materials/lessons and classroom communication skills in English

NO2 sensing properties of macroporous In2O3-based powders fabricated by utilizing ultrasonic spray pyrolysis employing polymethylmethacrylate microspheres as a template

Macroporous (mp-) In2O3-based microspheres as a NO2 sensing material were prepared by the pyrolysis of atomized In(NO3)3 aqueous solutions containing polymethylmethacrylate (PMMA) microspheres (150 nm in diameter) as a template. Well-developed spherical macropores (less than 100 nm in diameter) reflecting the morphology of the PMMA microsphere templates could be formed in the In2O3-based microspheres. The introduction of macropores into In2O3-based microspheres was very effective in improving the NO2 response of their thick films fabricated on an alumina substrate equipped with interdigitated Pt electrodes (gap size: ca. 200 μm) by screen-printing. In addition, the addition of a little amount of SnO2 to the mp-In2O3 microspheres not only lowered the resistance in air but also improved the NO2 response. NO2 sensing properties of non-stacked microspheres of the mp-In2O3 mixed with SnO2 were also investigated by utilizing nano-gap Au electrodes (gap size: ca. 200 nm). The non-stacked microspheres showed fast response and recovery speeds to NO2, because of better diffusion capability of NO2

The Physics of the B Factories

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C