1,113 research outputs found
Saturated Critical Heat Flux in a Multi-Microchannel Heat Sink Fed by a Split Flow System
An extensive experimental campaign has been carried out for the measurement of saturated critical heat flux in a multi-microchannel copper heat sink. The heat sink was formed by 29 parallel channels that were 199 μm wide and 756 μm deep. In order to increase the critical heat flux and reduce the two-phase pressure drop, a split flow system was implemented with one central inlet at the middle of the channels and two outlets at either end. The base critical heat flux was measured using three HFC Refrigerants (R134a, R236fa and R245fa) for mass fluxes ranging from 250 to 1500 kg/m2 s, inlet subcoolings from −25 to −5 K and saturation temperatures from 20 to 50 °C. The parametric effects of mass velocity, saturation temperature and inlet subcooling were investigated. The analysis showed that significantly higher CHF was obtainable with the split flow system (one inlet–two outlets) compared to the single inlet–single outlet system, providing also a much lower pressure drop. Notably several existing predictive methods matched the experimental data quite well and quantitatively predicted the benefit of higher CHF of the split flow
Recommended from our members
Development of interconnected silicon micro-evaporators for the on-detector electronics cooling of the future ITS detector in the ALICE experiment at LHC
This paper was presented at the 4th Micro and Nano Flows Conference (MNF2014), which was held at University College, London, UK. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute, ASME Press, LCN London Centre for Nanotechnology, UCL University College London, UCL Engineering, the International NanoScience Community, www.nanopaprika.eu.The design of the future High Energy Physics (HEP) particle detectors for the upgrade of the LHC (Large Hadron Collider) experiments at CERN (European Organization for Nuclear Research) is pushing technological frontiers to the limit trying to reach unprecedented accuracy in particles identification and particle production dynamics in ultra-relativistic hadron collisions. The thermal management of the on-detector electronics and the development of low mass integrated cooling systems have become a crucial task in the design of silicon tracking detectors for HEP applications. In this paper, we present a novel concept of low mass interconnected silicon microchannel devices for the future Inner Tracking System of the ALICE (A Large Ion Collider Experiment) detector at LHC. This innovative design achieves the requirements of the detector while minimizing the total material budget
Studies of multiplicity in relativistic heavy-ion collisions
In this talk I'll review the present status of charged particle multiplicity
measurements from heavy-ion collisions. The characteristic features of
multiplicity distributions obtained in Au+Au collisions will be discussed in
terms of collision centrality and energy and compared to those of p+p
collisions. Multiplicity measurements of d+Au collisions at 200 GeV
nucleon-nucleon center-of-mass energy will also be discussed. The results will
be compared to various theoretical models and simple scaling properties of the
data will be identified.Comment: "Focus on Multiplicity" Internationsl Workshop on Particle
Multiplicity in Relativistic Heavy Ion Collisions, Bari, Italy, June 17-19,
2003, 16 pages, 15 figure
Recommended from our members
Remarkable performance recovery in highly defective perovskite solar cells by photo-oxidation
Exposure to environmental factors is generally expected to cause degradation in perovskite films and solar cells. Herein, we show that films with certain defect profiles can display the opposite effect, healing upon exposure to oxygen under illumination. We tune the iodine content of methylammonium lead triiodide perovskite from understoichiometric to overstoichiometric and expose them to oxygen and light prior to the addition of the top layers of the device, thereby examining the defect dependence of their photooxidative response in the absence of storage-related chemical processes. The contrast between the photovoltaic properties of the cells with different defects is stark. Understoichiometric samples indeed degrade, demonstrating performance at 33% of their untreated counterparts, while stoichiometric samples maintain their performance levels. Surprisingly, overstoichiometric samples, which show low current density and strong reverse hysteresis when untreated, heal to maximum performance levels (the same as untreated, stoichiometric samples) upon the photooxidative treatment. A similar, albeit smaller-scale, effect is observed for triple cation and methylammonium-free compositions, demonstrating the general application of this treatment to state-of-the-art compositions. We examine the reasons behind this response by a suite of characterization techniques, finding that the performance changes coincide with microstructural decay at the crystal surface, reorientation of the bulk crystal structure for the understoichiometric cells, and a decrease in the iodine-to-lead ratio of all films. These results indicate that defect engineering is a powerful tool to manipulate the stability of perovskite solar cells
Multiplicity Studies and Effective Energy in ALICE at the LHC
In this work we explore the possibility to perform ``effective energy''
studies in very high energy collisions at the CERN Large Hadron Collider (LHC).
In particular, we focus on the possibility to measure in collisions the
average charged multiplicity as a function of the effective energy with the
ALICE experiment, using its capability to measure the energy of the leading
baryons with the Zero Degree Calorimeters. Analyses of this kind have been done
at lower centre--of--mass energies and have shown that, once the appropriate
kinematic variables are chosen, particle production is characterized by
universal properties: no matter the nature of the interacting particles, the
final states have identical features. Assuming that this universality picture
can be extended to {\it ion--ion} collisions, as suggested by recent results
from RHIC experiments, a novel approach based on the scaling hypothesis for
limiting fragmentation has been used to derive the expected charged event
multiplicity in interactions at LHC. This leads to scenarios where the
multiplicity is significantly lower compared to most of the predictions from
the models currently used to describe high energy collisions. A mean
charged multiplicity of about 1000-2000 per rapidity unit (at ) is
expected for the most central collisions at .Comment: 12 pages, 19 figures. In memory of A. Smirnitski
Study of CP violation in Dalitz-plot analyses of B0 --> K+K-KS, B+ --> K+K-K+, and B+ --> KSKSK+
We perform amplitude analyses of the decays , , and , and measure CP-violating
parameters and partial branching fractions. The results are based on a data
sample of approximately decays, collected with the
BABAR detector at the PEP-II asymmetric-energy factory at the SLAC National
Accelerator Laboratory. For , we find a direct CP asymmetry
in of , which differs
from zero by . For , we measure the
CP-violating phase .
For , we measure an overall direct CP asymmetry of
. We also perform an angular-moment analysis of
the three channels, and determine that the state can be described
well by the sum of the resonances , , and
.Comment: 35 pages, 68 postscript figures. v3 - minor modifications to agree
with published versio
Search for the standard model Higgs boson decaying to a bb pair in events with one charged lepton and large missing transverse energy using the full CDF data set
We present a search for the standard model Higgs boson produced in
association with a W boson in sqrt(s) = 1.96 TeV p-pbar collision data
collected with the CDF II detector at the Tevatron corresponding to an
integrated luminosity of 9.45 fb-1. In events consistent with the decay of the
Higgs boson to a bottom-quark pair and the W boson to an electron or muon and a
neutrino, we set 95% credibility level upper limits on the WH production cross
section times the H->bb branching ratio as a function of Higgs boson mass. At a
Higgs boson mass of 125 GeV/c2 we observe (expect) a limit of 4.9 (2.8) times
the standard model value.Comment: Submitted to Phys. Rev. Lett (v2 contains clarifications suggested by
PRL
Search for the standard model Higgs boson decaying to a pair in events with no charged leptons and large missing transverse energy using the full CDF data set
We report on a search for the standard model Higgs boson produced in
association with a vector boson in the full data set of proton-antiproton
collisions at TeV recorded by the CDF II detector at the
Tevatron, corresponding to an integrated luminosity of 9.45 fb. We
consider events having no identified charged lepton, a transverse energy
imbalance, and two or three jets, of which at least one is consistent with
originating from the decay of a quark. We place 95% credibility level upper
limits on the production cross section times standard model branching fraction
for several mass hypotheses between 90 and . For a Higgs
boson mass of , the observed (expected) limit is 6.7
(3.6) times the standard model prediction.Comment: Accepted by Phys. Rev. Let
- …