Discrete-time quadrature feedback cooling of a radio-frequency mechanical resonator

We have employed a feedback cooling scheme, which combines high-frequency mixing with digital signal processing. The frequency and damping rate of a 2 MHz micromechanical resonator embedded in a dc SQUID are adjusted with the feedback, and active cooling to a temperature of 14.3 mK is demonstrated. This technique can be applied to GHz resonators and allows for flexible control strategies.Comment: To appear in Appl. Phys. Let

Tunable backaction of a dc SQUID on an integrated micromechanical resonator

We have measured the backaction of a dc superconducting quantum interference device (SQUID) position detector on an integrated 1 MHz flexural resonator. The frequency and quality factor of the micromechanical resonator can be tuned with bias current and applied magnetic flux. The backaction is caused by the Lorentz force due to the change in circulating current when the resonator displaces. The experimental features are reproduced by numerical calculations using the resistively and capacitively shunted junction (RCSJ) model.Comment: Submitted to Phys. Rev. Let

Dissipative dynamics of a qubit coupled to a nonlinear oscillator

We consider the dissipative dynamics of a qubit coupled to a nonlinear oscillator (NO) embedded in an Ohmic environment. By treating the nonlinearity up to first order and applying Van Vleck perturbation theory up to second order in the qubit-NO coupling, we derive an analytical expression for the eigenstates and eigenfunctions of the coupled qubit-NO system beyond the rotating wave approximation. In the regime of weak coupling to the thermal bath, analytical expressions for the time evolution of the qubit's populations are derived: they describe a multiplicity of damped oscillations superposed to a complex relaxation part toward thermal equilibrium. The long time dynamics is characterized by a single relaxation rate, which is maximal when the qubit is tuned to one of the resonances with the nonlinear oscillator.Comment: 24 pages, 7 figures, 1 table; in the text between Eq. (8) and (9) there were misprints in the published version until 3rd Dec 2009: in the second order correction for the nonlinear oscillator and in the corresponding relative error. The correct expressions are given here. The results of the paper are not changed, as we consider the nonlinearity up to first order perturbation theor

The dissipative quantum Duffing oscillator: a comparison of Floquet-based approaches

We study the dissipative quantum Duffing oscillator in the deep quantum regime with two different approaches: The first is based on the exact Floquet states of the linear oscillator and the nonlinearity is treated perturbatively. It well describes the nonlinear oscillator dynamics away from resonance. The second, in contrast, is applicable at and in the vicinity of a N-photon resonance and it exploits quasi-degenerate perturbation theory for the nonlinear oscillator in Floquet space. It is perturbative both in driving and nonlinearity. A combination of both approaches yields the possibility to cover the whole range of driving frequencies. As an example we discuss the dissipative dynamics of the Duffing oscillator near and at the one-photon resonance.Comment: 38 pages, 4 figure

Coupling carbon nanotube mechanics to a superconducting circuit

The quantum behaviour of mechanical resonators is a new and emerging field driven by recent experiments reaching the quantum ground state. The high frequency, small mass, and large quality-factor of carbon nanotube resonators make them attractive for quantum nanomechanical applications. A common element in experiments achieving the resonator ground state is a second quantum system, such as coherent photons or superconducting device, coupled to the resonators motion. For nanotubes, however, this is a challenge due to their small size. Here, we couple a carbon nanoelectromechanical (NEMS) device to a superconducting circuit. Suspended carbon nanotubes act as both superconducting junctions and moving elements in a Superconducting Quantum Interference Device (SQUID). We observe a strong modulation of the flux through the SQUID from displacements of the nanotube. Incorporating this SQUID into superconducting resonators and qubits should enable the detection and manipulation of nanotube mechanical quantum states at the single-phonon level

Hybrid Mechanical Systems

We discuss hybrid systems in which a mechanical oscillator is coupled to another (microscopic) quantum system, such as trapped atoms or ions, solid-state spin qubits, or superconducting devices. We summarize and compare different coupling schemes and describe first experimental implementations. Hybrid mechanical systems enable new approaches to quantum control of mechanical objects, precision sensing, and quantum information processing.Comment: To cite this review, please refer to the published book chapter (see Journal-ref and DOI). This v2 corresponds to the published versio

Nanomechanical motion measured with precision beyond the standard quantum limit

Nanomechanical oscillators are at the heart of ultrasensitive detectors of force, mass and motion. As these detectors progress to even better sensitivity, they will encounter measurement limits imposed by the laws of quantum mechanics. For example, if the imprecision of a measurement of an oscillator's position is pushed below the standard quantum limit (SQL), quantum mechanics demands that the motion of the oscillator be perturbed by an amount larger than the SQL. Minimizing this quantum backaction noise and nonfundamental, or technical, noise requires an information efficient measurement. Here we integrate a microwave cavity optomechanical system and a nearly noiseless amplifier into an interferometer to achieve an imprecision below the SQL. As the microwave interferometer is naturally operated at cryogenic temperatures, the thermal motion of the oscillator is minimized, yielding an excellent force detector with a sensitivity of 0.51 aN/rt(Hz). In addition, the demonstrated efficient measurement is a critical step towards entangling mechanical oscillators with other quantum systems.Comment: 5 pages, 4 figure

Mechanical systems in the quantum regime

Mechanical systems are ideal candidates for studying quantumbehavior of macroscopic objects. To this end, a mechanical resonator has to be cooled to its ground state and its position has to be measured with great accuracy. Currently, various routes to reach these goals are being explored. In this review, we discuss different techniques for sensitive position detection and we give an overview of the cooling techniques that are being employed. The latter include sideband cooling and active feedback cooling. The basic concepts that are important when measuring on mechanical systems with high accuracy and/or at very low temperatures, such as thermal and quantum noise, linear response theory, and backaction, are explained. From this, the quantum limit on linear position detection is obtained and the sensitivities that have been achieved in recent opto and nanoelectromechanical experiments are compared to this limit. The mechanical resonators that are used in the experiments range from meter-sized gravitational wave detectors to nanomechanical systems that can only be read out using mesoscopic devices such as single-electron transistors or superconducting quantum interference devices. A special class of nanomechanical systems are bottom-up fabricated carbon-based devices, which have very high frequencies and yet a large zero-point motion, making them ideal for reaching the quantum regime. The mechanics of some of the different mechanical systems at the nanoscale is studied. We conclude this review with an outlook of how state-of-the-art mechanical resonators can be improved to study quantum {\it mechanics}.Comment: To appear in Phys. Re