679 research outputs found

    Electron-phonon interaction in C70

    Full text link
    The matrix elements of the deformation potential of C70_{70} are calculated by means of a simple, yet accurate solution of the electron-phonon coupling problem in fullerenes, based on a parametrization of the ground state electronic density of the system in terms of sp2+xsp^{2+x} hybridized orbitals. The value of the calculated dimensionless total electron-phonon coupling constant is λ≈0.1\lambda\approx0.1, an order of magnitude smaller than in C60_{60}, consistent with the lack of a superconducting phase transition in C70_{70}A3_3 fullerite, and in overall agreement with measurements of the broadening of Raman peaks in C70_{70}K4_4. We also calculate the photoemission cross section of C70−_{70}^-, which is found to display less structure than that associated with C60−_{60}^-, in overall agreement with the experimental findings.Comment: To be published in Phys. Rev.

    Poly(allylamine) magnetomicelles for image guided drug delivery.

    Get PDF
    Polymeric micelles have received considerable interest for their use as drug delivery vehicles for hydrophobic drug solubilisation. Inorganic metallic nanoparticles have already been exploited clinically in diagnostics for their contrast ability, using magnetic resonance imaging. The combination of these two platforms results in a multifunctional drug carrier for image-guided drug delivery. Here we report the synthesis and evaluation of a new class of poly(allylamine) (PAA) polymer grafted with hydrophobic oxadiazole (Ox) pendant group in a 5% molar monomer: pendant ratio. Further, the thiol-containing pendant group facilitated the attachment of hybrid iron oxide-gold nanoparticles (HNPs) via dative covalent bonding. Physicochemical characterisation of both PAA-Ox5 and PAA-Ox5-HNP polymers was carried out using elemental analysis, nuclear magnetic resonance (NMR), fourier transform infrared spectroscopy (FTIR) and photon correlation spectroscopy (PCS). The drug loading potential of these novel aggregates was investigated, through direct conjugation of hydrophilic and encapsulation of hydrophobic drugs, respectively. The model hydrophobic drugs 2,6- diisopropylphenol (propofol) and (2S,6'R)-7-chloro-2',4,6-trimethoxy-6'-methyl-3H,4'H-spiro[1-benzofuran-2,1'- cyclohex[2]ene]-3,4'-dione (griseofulvin), and the chemotherapeutic agents bisnapthalamidopropyldiaminooctane (BNIPDaoct) and 6-Thioguanine (6-TG) were used. The data showed that the addition of HNPs onto the PAA-Ox5 structure resulted in aggregates of 175 nm in diameter. The PAA-Ox5-HNP nano-aggregates were capable of high drug solubilisation capacities (25.79 mgmL-1, 1.68 mgmL-1 and 0.92 mgmL-1) for propofol, griseofulvin and BNIPDaoct, respectively. 6-TG was also successfully conjugated into the polymer structure (2.8 mgmL-1). In vitro assays on human pancreatic adenocarcinoma cells (BxPC-3) showed increased drug uptake and decreased IC50 values using the novel formulations compared with free drug. This study highlights the potential of PAA-Ox5-HNP as a bi-functional imaging and drug delivery platform

    Comparative analysis of the genes UL1 through UL7 of the duck enteritis virus and other herpesviruses of the subfamily Alphaherpesvirinae

    Get PDF
    The nucleotide sequences of eight open reading frames (ORFs) located at the 5' end of the unique long region of the duck enteritis virus (DEV) Clone-03 strain were determined. The genes identified were designated UL1, UL2, UL3, UL4, UL5, UL6 and UL7 homologues of the herpes simplex virus 1 (HSV-1). The DEV UL3.5 located between UL3 and UL4 had no homologue in the HSV-1. The arrangement and transcription orientation of the eight genes were collinear with their homologues in the HSV-1. Phylogenetic trees were constructed based on the alignments of the deduced amino acids of eight proteins with their homologues in 12 alpha-herpesviruses. In the UL1, UL3, UL3.5, UL5 and UL7 proteins trees, the branches were more closely related to the genus Mardivirus. However, the UL2, UL4, and UL6 proteins phylogenetic trees indicated a large distance from Mardivirus, indicating that the DEV evolved differently from other viruses in the subfamily Alphaherpesvirinae and formed a single branch within this subfamily

    Fitting the integrated Spectral Energy Distributions of Galaxies

    Full text link
    Fitting the spectral energy distributions (SEDs) of galaxies is an almost universally used technique that has matured significantly in the last decade. Model predictions and fitting procedures have improved significantly over this time, attempting to keep up with the vastly increased volume and quality of available data. We review here the field of SED fitting, describing the modelling of ultraviolet to infrared galaxy SEDs, the creation of multiwavelength data sets, and the methods used to fit model SEDs to observed galaxy data sets. We touch upon the achievements and challenges in the major ingredients of SED fitting, with a special emphasis on describing the interplay between the quality of the available data, the quality of the available models, and the best fitting technique to use in order to obtain a realistic measurement as well as realistic uncertainties. We conclude that SED fitting can be used effectively to derive a range of physical properties of galaxies, such as redshift, stellar masses, star formation rates, dust masses, and metallicities, with care taken not to over-interpret the available data. Yet there still exist many issues such as estimating the age of the oldest stars in a galaxy, finer details ofdust properties and dust-star geometry, and the influences of poorly understood, luminous stellar types and phases. The challenge for the coming years will be to improve both the models and the observational data sets to resolve these uncertainties. The present review will be made available on an interactive, moderated web page (sedfitting.org), where the community can access and change the text. The intention is to expand the text and keep it up to date over the coming years.Comment: 54 pages, 26 figures, Accepted for publication in Astrophysics & Space Scienc

    Characterization of Loading Responses and Failure Loci of a Boron Steel Spot Weld

    Get PDF
    Boron steel, classed as an ultra high-strength steel (UHSS), has been utilized in anti-intrusion systems in automobiles, providing high strength and weight-saving potential through gage reduction. UHSS spot welds exhibit unique hardness distributions, with a hard nugget and outlying base material, but with a soft heat-affected zone in-between these regions. This soft zone reduces the strength of the weld and makes it susceptible to failure. Due to the interaction of various weld zones that occurs during loading, there is a need to characterize the loading response of the weld for accurate failure predictions. The loading response of certain weld zones, as well as failure loci, was obtained through physical simulation of the welding process. The results showed a significant difference in mechanical behavior through the weld length. An important result is that instrumented indentation was shown to be a valid, quantitative method for verifying the accuracy with which weld microstructure has been recreated with regard to the target weld microstructure

    Search for a W' boson decaying to a bottom quark and a top quark in pp collisions at sqrt(s) = 7 TeV

    Get PDF
    Results are presented from a search for a W' boson using a dataset corresponding to 5.0 inverse femtobarns of integrated luminosity collected during 2011 by the CMS experiment at the LHC in pp collisions at sqrt(s)=7 TeV. The W' boson is modeled as a heavy W boson, but different scenarios for the couplings to fermions are considered, involving both left-handed and right-handed chiral projections of the fermions, as well as an arbitrary mixture of the two. The search is performed in the decay channel W' to t b, leading to a final state signature with a single lepton (e, mu), missing transverse energy, and jets, at least one of which is tagged as a b-jet. A W' boson that couples to fermions with the same coupling constant as the W, but to the right-handed rather than left-handed chiral projections, is excluded for masses below 1.85 TeV at the 95% confidence level. For the first time using LHC data, constraints on the W' gauge coupling for a set of left- and right-handed coupling combinations have been placed. These results represent a significant improvement over previously published limits.Comment: Submitted to Physics Letters B. Replaced with version publishe

    Search for the standard model Higgs boson decaying into two photons in pp collisions at sqrt(s)=7 TeV

    Get PDF
    A search for a Higgs boson decaying into two photons is described. The analysis is performed using a dataset recorded by the CMS experiment at the LHC from pp collisions at a centre-of-mass energy of 7 TeV, which corresponds to an integrated luminosity of 4.8 inverse femtobarns. Limits are set on the cross section of the standard model Higgs boson decaying to two photons. The expected exclusion limit at 95% confidence level is between 1.4 and 2.4 times the standard model cross section in the mass range between 110 and 150 GeV. The analysis of the data excludes, at 95% confidence level, the standard model Higgs boson decaying into two photons in the mass range 128 to 132 GeV. The largest excess of events above the expected standard model background is observed for a Higgs boson mass hypothesis of 124 GeV with a local significance of 3.1 sigma. The global significance of observing an excess with a local significance greater than 3.1 sigma anywhere in the search range 110-150 GeV is estimated to be 1.8 sigma. More data are required to ascertain the origin of this excess.Comment: Submitted to Physics Letters

    Measurement of the Lambda(b) cross section and the anti-Lambda(b) to Lambda(b) ratio with Lambda(b) to J/Psi Lambda decays in pp collisions at sqrt(s) = 7 TeV

    Get PDF
    The Lambda(b) differential production cross section and the cross section ratio anti-Lambda(b)/Lambda(b) are measured as functions of transverse momentum pt(Lambda(b)) and rapidity abs(y(Lambda(b))) in pp collisions at sqrt(s) = 7 TeV using data collected by the CMS experiment at the LHC. The measurements are based on Lambda(b) decays reconstructed in the exclusive final state J/Psi Lambda, with the subsequent decays J/Psi to an opposite-sign muon pair and Lambda to proton pion, using a data sample corresponding to an integrated luminosity of 1.9 inverse femtobarns. The product of the cross section times the branching ratio for Lambda(b) to J/Psi Lambda versus pt(Lambda(b)) falls faster than that of b mesons. The measured value of the cross section times the branching ratio for pt(Lambda(b)) > 10 GeV and abs(y(Lambda(b))) < 2.0 is 1.06 +/- 0.06 +/- 0.12 nb, and the integrated cross section ratio for anti-Lambda(b)/Lambda(b) is 1.02 +/- 0.07 +/- 0.09, where the uncertainties are statistical and systematic, respectively.Comment: Submitted to Physics Letters

    Search for new physics in events with opposite-sign leptons, jets, and missing transverse energy in pp collisions at sqrt(s) = 7 TeV

    Get PDF
    A search is presented for physics beyond the standard model (BSM) in final states with a pair of opposite-sign isolated leptons accompanied by jets and missing transverse energy. The search uses LHC data recorded at a center-of-mass energy sqrt(s) = 7 TeV with the CMS detector, corresponding to an integrated luminosity of approximately 5 inverse femtobarns. Two complementary search strategies are employed. The first probes models with a specific dilepton production mechanism that leads to a characteristic kinematic edge in the dilepton mass distribution. The second strategy probes models of dilepton production with heavy, colored objects that decay to final states including invisible particles, leading to very large hadronic activity and missing transverse energy. No evidence for an event yield in excess of the standard model expectations is found. Upper limits on the BSM contributions to the signal regions are deduced from the results, which are used to exclude a region of the parameter space of the constrained minimal supersymmetric extension of the standard model. Additional information related to detector efficiencies and response is provided to allow testing specific models of BSM physics not considered in this paper.Comment: Replaced with published version. Added journal reference and DO

    Measurement of isolated photon production in pp and PbPb collisions at sqrt(sNN) = 2.76 TeV

    Get PDF
    Isolated photon production is measured in proton-proton and lead-lead collisions at nucleon-nucleon centre-of-mass energies of 2.76 TeV in the pseudorapidity range |eta|<1.44 and transverse energies ET between 20 and 80 GeV with the CMS detector at the LHC. The measured ET spectra are found to be in good agreement with next-to-leading-order perturbative QCD predictions. The ratio of PbPb to pp isolated photon ET-differential yields, scaled by the number of incoherent nucleon-nucleon collisions, is consistent with unity for all PbPb reaction centralities.Comment: Submitted to Physics Letters
    • 

    corecore