Maize grown for bioenergy on peat emits twice as much carbon as when grown on mineral soil

The area of land dedicated to growing maize for bioenergy in the United Kingdom is rapidly expanding. To understand how maize production influences soil carbon (C) dynamics, and whether this is influenced by soil type, we measured net ecosystem exchange (NEE) using the eddy covariance technique over the 2021 growing season. We combined the NEE data with C imports and exports to calculate the net ecosystem productivity (NEP) of two maize crops grown for bioenergy in the United Kingdom, one site on mineral soil and the other on lowland agricultural peat. Maize was similarly productive at both sites—gross primary productivity was 1107 g C m−2 at the site with mineral soil and 1407 g C m−2 at the peat site. However, total ecosystem respiration was considerably higher from the peat site (1198 g C m−2) compared with the mineral soil site (678 g C m−2). After accounting for the removal of C in harvested biomass, both sites were net C sources, but C losses were over two times greater from the peat site (NEP = 290 g C m−2) than the mineral site (NEP = 136 g C m−2). While annual crops may be needed to produce bioenergy in the short term, growing maize for bioenergy in the United Kingdom does not appear to be a viable option for C sequestration over the long term, as it leads to high carbon losses from agroecosystems, especially those on organic soils. Instead, growing perennial bioenergy crops on mineral soils with a low organic C content is a more appropriate option

Temporal, spatial, and structural patterns of adult trembling aspen and white spruce mortality in Quebec's boreal forest

Temporal, spatial, and structural patterns of adult trembling aspen (Populus tremuloides Michx.) and white spruce (Picea glauca (Moench) Voss) mortality were studied in intact 150-year-old stands in the southwestern boreal forest of Quebec. For both species, mortality decreases (number of dead trees/total number of trees) with distance from the lake edge until 100-150 m, from which point it slightly increases. Strong peaks in mortality were found for 40- to 60-year-old aspen mainly between 1974 and 1992. Such mortality in relatively young aspen is likely related to competition for light from the dominant canopy trees. Also, the recruitment of this young aspen cohort is presumably the result of a stand breakup that occurred when the initial aspen-dominated stand was between 90 and 110 years old. For spruce, strong peaks in mortality were found in 110- to 150-year-old trees and they occurred mainly after 1980. No clear explanation could be found for these peaks, but we suggest that they may be related to senescence or weakening of the trees following the last spruce budworm outbreak. Suppressed and codominant aspen had a much higher mortality ratio than spruce in the same height class, while more surprisingly, no difference in mortality rate was found between dominant trees of the two species. Most spruce trees were found as standing dead, which leads us to reject the hypothesis that windthrow is an important cause of mortality for spruce in our forests

Overriding water table control on managed peatland greenhouse gas emissions

Global peatlands store more carbon than is naturally present in the atmosphere1,2. However, many peatlands are under pressure from drainage-based agriculture, plantation development and fire, with the equivalent of around 3% of all anthropogenic greenhouse gases emitted from drained peatland3–5. Efforts to curb such emissions are intensifying through the conservation of undrained peatlands and rewetting of drained systems6. Here we report CO2 eddy covariance data from 16 locations and CH4 data from 41 locations in the British Isles, and combine them with published data from sites across all major peatland biomes. We find that the mean annual effective water-table depth (WTDe; that is, the average depth of the aerated peat layer) overrides all other ecosystem- and management-related controls on greenhouse gas fluxes. We estimate that every 10 cm of reduction in WTDe could reduce the net warming impact of CO2 and CH4 emissions (100-year Global Warming Potentials) by at least 3 t CO2e ha-1 yr-1, until WTDe is < 30 cm. Raising water levels further would continue to have a net cooling effect until WTDe is < 10 cm. Our results suggest that greenhouse gas emissions from peatlands drained for agriculture could be greatly reduced without necessarily halting their productive use. Halving WTDe in all drained agricultural peatlands, for example, could reduce emissions by the equivalent of over 1% of global anthropogenic emissions

Roadmap on Li-ion battery manufacturing research

Growth in the Li-ion battery market continues to accelerate, driven primarily by the increasing need for economic energy storage for electric vehicles. Electrode manufacture by slurry casting is the first main step in cell production but much of the manufacturing optimisation is based on trial and error, know-how and individual expertise. Advancing manufacturing science that underpins Li-ion battery electrode production is critical to adding to the electrode manufacturing value chain. Overcoming the current barriers in electrode manufacturing requires advances in materials, manufacturing technology, in-line process metrology and data analytics, and can enable improvements in cell performance, quality, safety and process sustainability. In this roadmap we explore the research opportunities to improve each stage of the electrode manufacturing process, from materials synthesis through to electrode calendering. We highlight the role of new process technology, such as dry processing, and advanced electrode design supported through electrode level, physics-based modelling. Progress in data driven models of electrode manufacturing processes is also considered. We conclude there is a growing need for innovations in process metrology to aid fundamental understanding and to enable feedback control, an opportunity for electrode design to reduce trial and error, and an urgent imperative to improve the sustainability of manufacture

Defra Lowland Peat 2: Managing agricultural systems on lowland peat for decreased greenhouse gas emissions whilst maintaining agricultural productivity. Report to Defra for Project SP1218

DescriptionThis report describes the results of the Defra "Lowland Peat 2" project, which ran from 2019 to 2023. This Project assessed the opportunities and challenges of managing lowland agricultural peat for reduced greenhouse gas emissions, providing evidence to support Departmental Net Zero ambitions, as well as help inform policy linked to the England Peat Action Plan (2021). Key findings include a detailed review of the opportunities and challenges for paludiculture (wetland-based agriculture) as a potential emissions mitigation measure; additional review scoping the societal impacts of lowland peat drainage, with a focus on the impacts of long-term subsidence; analyses from what is believed to be the largest network of flux towers on agricultural peatlands globally, suggesting that raising water levels could help to mitigate peat GHG emissions, and if correctly optimised may not lead to yield declines.The report also explores the role of "regenerative" farming measures in reducing peat GHGs.ObjectiveThe project assessed the opportunities and challenges of managing lowland agricultural peat for reduced greenhouse gas emissions. Primarily work in this area looks to support priorities of net zero, climate adaptation and mitigation, national food security, water security, and protection of biodiversity and habitats.. Following the earlier Lowland Peat 1 project (2014-2017) which generated fundamental data on GHG emissions from a range of contrasting lowland peat sites across England and Wales, the project focused primarily on developing and testing options to mitigate these emissions, whilst maintaining the agricultural productivity of lowland peatlands. The project coincided with a number of major peatland-related policy initiatives across the UK, including the Committee on Climate Change's 6th Carbon Budget and Net Zero Strategy, the England Peat Action Plan, and the Defra Lowland Agricultural Peat Task Force. Interim results from the project have fed into many of these initiatives, as well as to an update of emission factors for cropland and grassland on peat in the UK?s National Atmospheric Emissions Inventory

A First Search for coincident Gravitational Waves and High Energy Neutrinos using LIGO, Virgo and ANTARES data from 2007

We present the results of the first search for gravitational wave bursts associated with high energy neutrinos. Together, these messengers could reveal new, hidden sources that are not observed by conventional photon astronomy, particularly at high energy. Our search uses neutrinos detected by the underwater neutrino telescope ANTARES in its 5 line configuration during the period January - September 2007, which coincided with the fifth and first science runs of LIGO and Virgo, respectively. The LIGO-Virgo data were analysed for candidate gravitational-wave signals coincident in time and direction with the neutrino events. No significant coincident events were observed. We place limits on the density of joint high energy neutrino - gravitational wave emission events in the local universe, and compare them with densities of merger and core-collapse events.Comment: 19 pages, 8 figures, science summary page at http://www.ligo.org/science/Publication-S5LV_ANTARES/index.php. Public access area to figures, tables at https://dcc.ligo.org/cgi-bin/DocDB/ShowDocument?docid=p120000

Supernova Interaction with a Circumstellar Medium

The explosion of a core collapse supernova drives a powerful shock front into the wind from the progenitor star. A layer of shocked circumstellar gas and ejecta develops that is subject to hydrodynamic instabilities. The hot gas can be observed directly by its X-ray emission, some of which is absorbed and re-radiated at lower frequencies by the ejecta and the circumstellar gas. Synchrotron radiation from relativistic electrons accelerated at the shock fronts provides information on the mass loss density if free-free absorption dominates at early times or the size of the emitting region if synchrotron self-absorption dominates. Analysis of the interaction leads to information on the density and structure of the ejecta and the circumstellar medium, and the abundances in these media. The emphasis here is on the physical processes related to the interaction.Comment: 22 pages, 7 figures, to appear as a Chapter in "Supernovae and Gamma-Ray Bursts," edited by K. W. Weiler (Springer-Verlag

Roadmap on Li-ion battery manufacturing research

Growth in the Li-ion battery market continues to accelerate, driven by increasing need for economic energy storage in the electric vehicle market. Electrode manufacture is the first main step in production and in an industry dominated by slurry casting, much of the manufacturing process is based on trial and error, know-how and individual expertise. Advancing manufacturing science that underpins Li-ion battery electrode production is critical to adding value to the electrode manufacturing value chain. Overcome the current barriers in the electrode manufacturing requires advances in material innovation, manufacturing technology, in-line process metrology and data analytics to improve cell performance, quality, safety and process sustainability. In this roadmap we present where fundamental research can impact advances in each stage of the electrode manufacturing process from materials synthesis to electrode calendering. We also highlight the role of new process technology such as dry processing and advanced electrode design supported through electrode level, physics-based modelling. To compliment this, the progresses in data driven models of full manufacturing processes is reviewed. For all the processes we describe, there is a growing need process metrology, not only to aid fundamental understanding but also to enable true feedback control of the manufacturing process. It is our hope this roadmap will contribute to this rapidly growing space and provide guidance and inspiration to academia and industry

Evaluation of sesamum gum as an excipient in matrix tablets

In developing countries modern medicines are often beyond the affordability of the majority of the population. This is due to the reliance on expensive imported raw materials despite the abundance of natural resources which could provide an equivalent or even an improved function. The aim of this study was to investigate the potential of sesamum gum (SG) extracted from the leaves of Sesamum radiatum (readily cultivated in sub-Saharan Africa) as a matrix former. Directly compressed matrix tablets were prepared from the extract and compared with similar matrices of HPMC (K4M) using theophylline as a model water soluble drug. The compaction, swelling, erosion and drug release from the matrices were studied in deionized water, 0.1 N HCl (pH 1.2) and phosphate buffer (pH 6.8) using USP apparatus II. The data from the swelling, erosion and drug release studies were also fitted into the respective mathematical models. Results showed that the matrices underwent a combination of swelling and erosion, with the swelling action being controlled by the rate of hydration in the medium. SG also controlled the release of theophylline similar to the HPMC and therefore may have use as an alternative excipient in regions where Sesamum radiatum can be easily cultivated

All-sky search for long-duration gravitational wave transients with initial LIGO

We present the results of a search for long-duration gravitational wave transients in two sets of data collected by the LIGO Hanford and LIGO Livingston detectors between November 5, 2005 and September 30, 2007, and July 7, 2009 and October 20, 2010, with a total observational time of 283.0 days and 132.9 days, respectively. The search targets gravitational wave transients of duration 10-500 s in a frequency band of 40-1000 Hz, with minimal assumptions about the signal waveform, polarization, source direction, or time of occurrence. All candidate triggers were consistent with the expected background; as a result we set 90% confidence upper limits on the rate of long-duration gravitational wave transients for different types of gravitational wave signals. For signals from black hole accretion disk instabilities, we set upper limits on the source rate density between 3.4×10-5 and 9.4×10-4 Mpc-3 yr-1 at 90% confidence. These are the first results from an all-sky search for unmodeled long-duration transient gravitational waves. © 2016 American Physical Society