Alignment of the CMS tracker with LHC and cosmic ray data

The central component of the CMS detector is the largest silicon tracker ever built. The precise alignment of this complex device is a formidable challenge, and only achievable with a significant extension of the technologies routinely used for tracking detectors in the past. This article describes the full-scale alignment procedure as it is used during LHC operations. Among the specific features of the method are the simultaneous determination of up to 200 000 alignment parameters with tracks, the measurement of individual sensor curvature parameters, the control of systematic misalignment effects, and the implementation of the whole procedure in a multiprocessor environment for high execution speed. Overall, the achieved statistical accuracy on the module alignment is found to be significantly better than 10 mu m

Koulutusluokitus : Koulutuskoodimuutokset vuonna 1989, Liite 3

A measurement of inclusive ZZ production cross section and constraints on anomalous triple gauge couplings in proton-proton collisions at $\sqrt{s}$ = 8 TeV are presented. A data sample, corresponding to an integrated luminosity of 19.6 inverse-femtobarns was collected with the CMS experiment at the LHC. The measurements are performed in the leptonic decay modes $ZZ \to lll'l'$, where $l = e, \mu$ and $l' = e, \mu, \tau$. The measured total cross section, $\sigma (pp \to ZZ) = 7.7 \pm 0.5 (stat.)^{+0.5}_{-0.4} (syst.) \pm 0.4 (theo.) \pm 0.2 (lum.) pb$ for both Z bosons produced in the mass range $m_Z$ within 60 and 120 GeV, is consistent with standard model predictions. Differential cross sections are measured and well described by the theoretical predictions. The invariant mass distribution of the four-lepton system is used to set limits on anomalous ZZZ and ZZ$\gamma$ couplings at the 95% confidence level: $f_4^Z$ in (-0.004,+0.004), $f_5^Z$ in (-0.005,+0.005), $f_4^\gamma$ in (-0.004,+0.004), and $f_5^\gamma$ in (-0.005,+0.005)

Search for a standard model-like Higgs boson in the mu(+)mu(-) and e(+)e(-) decay channels at the LHC

A search is presented for a standard model-like Higgs boson decaying to the mu(+)mu(-) or e(+)e(-) final states based on proton-proton collisions recorded by the CMS experiment at the CERN LHC. The data correspond to integrated luminosities of 5.0 fb(-1) at a centre-of-mass energy of 7 TeV and 19.7 fb(-1) at 8 TeV for the mu(+)mu(-) search, and of 19.7 fb(-1) at 8 TeV for the e(+)e(-) search. Upper limits on the production cross section times branching fraction at the 95% confidence level are reported for Higgs boson masses in the range from 120 to 150 GeV. For a Higgs boson with a mass of 125 GeV decaying to mu(+)mu(-), the observed (expected) upper limit on the production rate is found to be 7.4 (6.5(-1.9)(+2.8)) times the standard model value. This corresponds to an upper limit on the branching fraction of 0.0016. Similarly, for e(+)e(-), an upper limit of 0.0019 is placed on the branching fraction, which is approximate to 3.7 x 10(5) times the standard model value. These results, together with recent evidence of the 125 GeV boson coupling to tau-leptons with a larger branching fraction consistent with the standard model, confirm that the leptonic couplings of the new boson are not flavour-universal

LHCb detector performance

The LHCb detector is a forward spectrometer at the Large Hadron Collider (LHC) at CERN. The experiment is designed for precision measurements of CP violation and rare decays of beauty and charm hadrons. In this paper the performance of the various LHCb sub-detectors and the trigger system are described, using data taken from 2010 to 2012. It is shown that the design criteria of the experiment have been met. The excellent performance of the detector has allowed the LHCb collaboration to publish a wide range of physics results, demonstrating LHCb's unique role, both as a heavy flavour experiment and as a general purpose detector in the forward region

Identification of beauty and charm quark jets at LHCb

Identification of jets originating from beauty and charm quarks is important for measuring Standard Model processes and for searching for new physics. The performance of algorithms developed to select b- and c-quark jets is measured using data recorded by LHCb from proton-proton collisions at root s = 7TeV in 2011 and at root s = 8TeV in 2012. The efficiency for identifying a b (c) jet is about 65%(25%) with a probability for misidentifying a light-parton jet of 0.3% for jets with transverse momentum pT > 20GeV and pseudorapidity 2 : 2 < eta < 4.2. The dependence of the performance on the pT and eta of the jet is also measured

Observation of the decay (B)over-bar(s)(0) -> psi(2S)K+pi(-)

The decay (B) over bar (0)(s) -> psi(2S)K+pi(-) is observed using a data set corresponding to an integrated luminosity of 3.0 fb(-1) collected by the LHCb experiment in pp collisions at centre-of-mass energies of 7 and 8 TeV. The branching fraction relative to the B-0 -> psi(2S)K+pi(-) decay mode is measured to be B((B) over bar (0)(s) -> psi(2S)K+pi(-))/B(B-0 -> psi(2S)K+pi(-)) = 5.38 +/- 0.36 (stat) +/- 0.22 (syst) +/- 0.31 (f(s)/f(d)) %, where f(s)/f(d) indicates the uncertainty due to the ratio of probabilities for a b quark to hadronise into a B-s(0) or B-0 meson. Using an amplitude analysis, the fraction of decays proceeding via an intermediate K*(892)(0) meson is measured to be 0.645 +/- 0.049 (stat) +/- 0.049 (syst) and its longitudinal polarisation fraction is 0.524 +/- 0.056 (stat) +/- 0.029 (syst). The relative branching fraction for this component is determined to be B((B) over bar (0)(s) -> psi(2S)K*(892)(0))/B(B-0 -> psi(2S)K*(892)(0)) = 5.58 +/- 0.57 (stat) +/- 0.40 (syst) +/- 0.32 (f(s)/f(d)) %. In addition, the mass splitting between the B-s(0) and B-0 mesons is measured as M(B-s(0)) - M(B-0) = 87.45 +/- 0.44 (stat) +/- 0.09 (syst) MeV/c(2). (C) 2015 CERN for the benefit of the LHCb Collaboration. Published by Elsevier B.V. This is an open access article under the CC BY licens

B flavour tagging using charm decays at the LHCb experiment

An algorithm is described for tagging the flavour content at production of neutral B mesons in the LHCb experiment. The algorithm exploits the correlation of the flavour of a B meson with the charge of a reconstructed secondary charm hadron from the decay of the other b hadron produced in the proton-proton collision. Charm hadron candidates are identified in a number of fully or partially reconstructed Cabibbo-favoured decay modes. The algorithm is calibrated on the self-tagged decay modes B+ -> J/psi K+ and B-0 -> J/psi K*(0) using 3.0fb(-1) of data collected by the LHCb experiment at pp centre-of-mass energies of 7TeV and 8TeV. Its tagging power on these samples of B -> J/psi X decays is (0.30 +/- 0.01 +/- 0.01) %

Study of the rare B-s(0) and B-0 decays into the pi(+) pi(-) mu(+) mu(-) final state

A search for the rare decays B-s(0) -> pi(+) pi-mu(+) mu-and B-0 -> pi(+) pi-mu(+) mu-is performed in a data set corresponding to an integrated luminosity of 3.0 fb(-1) collected by the LHCb detector in proton-proton collisions at centre-of-mass energies of 7 and 8 TeV. Decay candidates with pion pairs that have invariant mass in the range 0.5-1.3GeV/c(2) and with muon pairs that do not originate from a resonance are considered. The first observation of the decay B-s(0) -> pi(+) pi-mu(+) mu- and the first evidence of the decay B-0 -> pi(+) pi-mu(+) mu-are obtained and the branching fractions, restricted to the dipion-mass range considered, are measured to be B(B-s(0) -> pi(+) pi-mu(+) mu(-)) =(8.6 +/- 1.5(stat) +/- 0.7(syst) +/- 0.7 (norm)) x 10(-8) and B(B-0 -> pi(+) pi-mu(+) mu(-)) =(2.11 +/- 0.51(stat) +/- 0.15(syst) +/- 0.16(norm)) x10(-8), where the third uncertainty is due to the branching fraction of the decay B-0. -> J/Psi(mu(+) mu(-)) K*(892)(0)(-> K+ pi(-)), used as a normalisation. (C) 2015 The Authors. Published by Elsevier B.V