The Network of Knowledge approach: improving the science and society dialogue on biodiversity and ecosystem services in Europe

The absence of a good interface between scientific and other knowledge holders and decision-makers in the area of biodiversity and ecosystem services has been recognised for a long time. Despite recent advancements, e.g. with the Intergovernmental Platform on Biodiversity and Ecosystem Services (IPBES), challenges remain, particularly concerning the timely provision of consolidated views from different knowledge domains. To address this challenge, a strong and flexible networking approach is needed across knowledge domains and institutions. Here, we report on a broad consultation process across Europe to develop a Network of Knowledge on biodiversity and ecosystem services (NoK), an approach aiming at (1) organising institutions and knowledge holders in an adaptable and responsive framework and (2) informing decision-makers with timely and accurate biodiversity knowledge. The consultation provided a critical analysis of the needs that should be addressed by a NoK and how it could complement existing European initiatives and institutions at the interface between policy and science. Among other functions, the NoK provides consolidated scientific views on contested topics, identification of research gaps to support relevant policies, and horizon scanning activities to anticipate emerging issues. The NoK includes a capacity building component on interfacing activities and contains mechanisms to ensure its credibility, relevance and legitimacy. Such a network would need to ensure credibility, relevance and legitimacy of its work by maximizing transparency and flexibility of processes, quality of outputs, the link to data and knowledge provision, the motivation of experts for getting involved and sound communication and capacity building

Report from the EPAA workshop: In vitro ADME in safety testing used by EPAA industry sectors

AbstractThere are now numerous in vitro and in silico ADME alternatives to in vivo assays but how do different industries incorporate them into their decision tree approaches for risk assessment, bearing in mind that the chemicals tested are intended for widely varying purposes? The extent of the use of animal tests is mainly driven by regulations or by the lack of a suitable in vitro model. Therefore, what considerations are needed for alternative models and how can they be improved so that they can be used as part of the risk assessment process? To address these issues, the European Partnership for Alternative Approaches to Animal Testing (EPAA) working group on prioritisation, promotion and implementation of the 3Rs research held a workshop in November, 2008 in Duesseldorf, Germany. Participants included different industry sectors such as pharmaceuticals, cosmetics, industrial- and agro-chemicals. This report describes the outcome of the discussions and recommendations (a) to reduce the number of animals used for determining the ADME properties of chemicals and (b) for considerations and actions regarding in vitro and in silico assays. These included: standardisation and promotion of in vitro assays so that they may become accepted by regulators; increased availability of industry in vivo kinetic data for a central database to increase the power of in silico predictions; expansion of the applicability domains of in vitro and in silico tools (which are not necessarily more applicable or even exclusive to one particular sector) and continued collaborations between regulators, academia and industry. A recommended immediate course of action was to establish an expert panel of users, developers and regulators to define the testing scope of models for different chemical classes. It was agreed by all participants that improvement and harmonization of alternative approaches is needed for all sectors and this will most effectively be achieved by stakeholders from different sectors sharing data

Variation in clutch size in relation to nest size in birds

Peer reviewe

Spectral broadening in Brillouin imaging

Brillouin microscopy is an emerging imaging modality that provides fundamental information about mechanical properties of media in a non-contact manner. To date, low numerical aperture (NA) optics have been used, due to noticeable angular broadening of the Brillouin spectrum at higher NAs. In this work, we investigate theoretically and experimentally the dependence of spectral broadening effects in Brillouin imaging on system NA, for both 90 degrees and 180 degrees scattering geometries. Lineshape deformations and broadening are found to be minimised in a backscattering geometry, hence paving the way for high resolution in-vivo mechanical imaging. (C) 2013 AIP Publishing LLC

Confocal polarization imaging in high-numerical-aperture space

In this work we describe theoretical and experimental physical aspects of high-resolution imaging polarimetry and its application to polarization-multiplexed encoding. We theoretically demonstrate that it is possible to resolve the orientation of two fixed dipole-like emitters placed significantly below the resolution limit if their emission is uncorrelated. Furthermore, we experimentally demonstrate this phenomenon by illuminating closely spaced asymmetric nanopits with unpolarized light and subsequently determining their individual orientation and position from the measured spatial distributions of the azimuth angle of the polarization and degree of polarization, respectively. Reduction of the optical resolution of the imaging system is also shown to only weakly affect resolution obtainable via polarization measurements. (C) 2014 Optical Society of Americ

Polarization-multiplexed encoding at nanometer scales

Optical data storage was developed using binary encoding primarily due to signal to noise ratio considerations. We report on a multiplexing method that allows a seven fold storage increase, per storage layer, per side, and propose one that can yield theoretically a 20+ fold increase. Multiplexing is achieved by encoding information in polarization via appropriately oriented nanostructures that emit strongly polarized light when excited by unpolarized light. The storage increase is possible due to the significantly reduced crosstalk that results form using unpolarized light. (C) 2014 Optical Society of Americ

Stokes vector based polarization resolved second harmonic microscopy of starch granules

We report on the measurement and analysis of the polarization state of second harmonic signals generated by starch granules, using a four-channel photon counting based Stokes-polarimeter. Various polarization parameters, such as the degree of polarization (DOP), the degree of linear polarization (DOLP), the degree of circular polarization (DOCP), and anisotropy are extracted from the 2D second harmonic Stokes images of starch granules. The concentric shell structure of a starch granule forms a natural photonic crystal structure. By integration over all the solid angle, it will allow very similar SHG quantum efficiency regardless of the angle or the states of incident polarization. Given type I phase matching and the concentric shell structure of a starch granule, one can easily infer the polarization states of the input beam from the resulting SH micrograph. (C) 2013 Optical Society of Americ

X-ray microprobe studies of Hungarian background and urban aerosols

In order to determine the polluting atmospheric sources in urban and background areas source apportionment of the air particulate matter is necessary. Hitherto these studies were mostly based on bulk composition measurements of the aerosol. Source profiles, i.e. the concentrations of several elements for air particulate matter originating from one source, can be deduced from the receptor data using a number of multivariate techniques among which the chemical mass balance. The application is limited by the large number of observations that must be made for each of the variables. Often an elaborated sample preparation is necessary for fractionating the sample into several sub samples, according to the density, particle diameter or other relevant properties. Often this may results in poorly resolved source profiles. The aim of the present work is to find the relative abundance of the particle types originating from two different background monitoring stations in the middle of the Great Hungarian Plain. In urban areas most pollutants originate from traffic and municipal waste incineration. Since heavy metals play an important role in these samples the highly sensitive x-ray microscope (XRM) of the National Synchrotron Light Source (NSLS) of the Brookhaven National Laboratory was used. A feasibility study on individual aerosol particles sampled at the above background stations and in the urban area of Budapest is discussed

X-ray microprobe studies of Hungarian background and urban aerosols

In order to determine the polluting atmospheric sources in urban and background areas source apportionment of the air particulate matter is necessary. Hitherto these studies were mostly based on bulk composition measurements of the aerosol. Source profiles, i.e. the concentrations of several elements for air particulate matter originating from one source, can be deduced from the receptor data using a number of multivariate techniques among which the chemical mass balance. The application is limited by the large number of observations that must be made for each of the variables. Often an elaborated sample preparation is necessary for fractionating the sample into several sub samples, according to the density, particle diameter or other relevant properties. Often this may results in poorly resolved source profiles. The aim of the present work is to find the relative abundance of the particle types originating from two different background monitoring stations in the middle of the Great Hungarian Plain. In urban areas most pollutants originate from traffic and municipal waste incineration. Since heavy metals play an important role in these samples the highly sensitive x-ray microscope (XRM) of the National Synchrotron Light Source (NSLS) of the Brookhaven National Laboratory was used. A feasibility study on individual aerosol particles sampled at the above background stations and in the urban area of Budapest is discussed