Layer-by-layer biofabrication of coronary covered stents with clickable elastin-like recombinamers

Producción CientíficaCoronary artery disease is the leading cause of death around the world. Endovascular stenting is the preferred treatment option to restore blood flow in the coronary arteries due to the lower perioperative morbidity when compared with more invasive treatment options. However, stent failure is still a major clinical problem, and further technological solutions are required to improve the performance of current stents. Here, we developed coronary stents covered with elastin-like recombinamers (ELRs) by exploiting a layer-by-layer technique combined with catalyst-free click chemistry. The resulting ELR-covered stents were intact after an in vitro simulated implantation procedure by balloon dilatation, which evidenced the elastic performance of the membrane. Additionally, the stents were mechanically stable under high flow conditions, which is in agreement with the covalent and stable nature of the click chemistry crosslinking strategy exploited during the ELR-membrane manufacturing and the successful embedding of the stent. Minimal platelet adhesion was detected after blood exposure in a Chandler loop as shown by scanning electron microscopy. The seeding of human endothelial progenitor cells (EPCs) on the ELR-membranes resulted in a confluent endothelial layer. These results prove the potential of this strategy to develop an advanced generation of coronary stents, with a stable and bioactive elastin-like membrane to exclude the atherosclerotic plaque from the blood stream or to seal coronary perforations and aneurysms, while providing a luminal surface with minimal platelet adhesion and favouring endothelialization.German federal and state governments (project StUpPD_330-18)Ministerio de Economía, Industria y Competitividad (projects PCIN-2015-010 / MAT2016-78903-R)Junta de Castilla y León (project VA317P18

Development of a mechanism and an accurate and simple mathematical model for the description of drug release: Application to a relevant example of acetazolamide-controlled release from a bio-inspired elastin-based hydrogel

Producción CientíficaTransversality between mathematical modeling, pharmacology, and materials science is essential in order to achieve controlled-release systems with advanced properties. In this regard, the area of biomaterials provides a platform for the development of depots that are able to achieve controlled release of a drug, whereas pharmacology strives to find new therapeutic molecules and mathematical models have a connecting function, providing a rational understanding by modeling the parameters that influence the release observed. Herein we present a mechanism which, based on reasonable assumptions, explains the experimental data obtained very well. In addition, we have developed a simple and accurate “lumped” kinetics model to correctly fit the experimentally observed drug release behavior. This lumped model allows us to have simple analytic solutions for the mass and rate of drug release as a function of time without limitations of time or mass of drug released, which represents an important step-forward in the area of in vitro drug delivery when compared to the current state of the art in mathematical modeling. As an example, we applied the mechanism and model to the release data for acetazolamide from a recombinant polymer. Both materials were selected because of a need to develop a suitable ophthalmic formulation for the treatment of glaucoma. The in vitro release model proposed herein provides a valuable predictive tool for ensuring product performance and batch-to-batch reproducibility, thus paving the way for the development of further pharmaceutical devices.Este trabajo forma parte de los Proyectos de Investigación financiados por la Comisión Europea a través del Fondo Social Europeo (FSE) y de la Consejería de Educación mediante el Fondo Europeo de Desarrollo Regional (ERDF), el MINECO (Proyectos MAT2013-41723-R, MAT2013-42473-R, PRI−PIBAR-2011-1403 y MAT2012-38043), la Junta de Castilla y León (Proyectos VA155A12, VA152A12, and VA244U13), el CIBER-BBN y el Instituto de Salud Carlos III mediante el Centro de Medicina Regenerativa y Terapia Celular de Castilla y León

Recent Contributions of Elastin-Like Recombinamers to Biomedicine and Nanotechnology

Abstract: The emergence of the new scientific field known as nanomedicine is being catalyzed by multiple improvements in nanoscience techniques and significant progress in materials science, especially as regards the testing of novel and sophisticated biomaterials. This conjuncture has furthered the development of promising instruments in terms of detection, bioanalysis, therapy, diagnostics and imaging. Some of the most innovative new biomaterials are protein-inspired biomimetic materials in which modern biotechnology and genetic-engineering techniques complement the huge amount of information afforded by natural protein evolution to create advanced and tailor-made multifunctional molecules. Amongst these protein-based biomaterials, Elastin-like Recombinamers (ELRs) have demonstrated their enormous potential in the fields of biomedicine and nanoscience in the last few years. This broad applicability derives from their unmatched properties, particularly their recombinant and tailor-made nature, the intrinsic characteristics derived from their elastin-based origin (mainly their mechanical properties and ability to self-assemble as a result of their stimuli-responsive behavior), their proven biocompatibility and biodegradability, as well as their versatility as regards incorporating advanced chemical or recombinant modifications into the original structure that open up an almost unlimited number of multifunctional possibilities in this developing field. This article provides an updated review of the recent challenges overcome by using these recombinant biomaterials in the fields of nano- and biomedicine, ranging from nanoscale applications in surface modifications and self-assembled nanostructures to drug delivery and regenerative medicine.Este trabajo forma parte de Proyectos de Investigación financiados por la Comisión Europea a través del Fondo Europeo de Desarrollo Regional (ERDF), por el del MINECO (MAT2010-15982, MAT2010-15310, PRI-PIBAR-2011-1403 and MAT2012-38043), la Junta de Castilla y León (VA049A11, VA152A12 y VA155A12) y el Instituto de Salud Carlos III bajo el Centro en Red de Medicina Regenerativa y Terapia Celular de Castilla y León

Nanotechnological Approaches to Therapeutic Delivery Using Elastin-Like Recombinamers

Producción CientíficaThis Review discusses the use of elastin-like polymers and their recombinant version, elastin-like recombinamers, in drug-delivery systems. These macromolecules exhibit a number of interesting properties that are rarely found together in any other family of materials, especially extremely high biocompatibility, high bioactivity and functionality, complex yet fully controlled composition, and stimuli responsiveness. Appropriate design of these molecules opens up a broad range of different possibilities for their use in new therapeutic platforms. The first of these described herein is the use of ELRs in single-molecule devices as therapeutic entities in their own right. Subsequently, we describe how the self-assembly properties of these materials can be exploited to create nanocarriers and, eventually, microcarriers that are able to temporally and spatially control and direct the release of their drug load. Intracellular drug-delivery devices and nanocarriers for treating cancer are among the uses described in that section. Finally, the use of ELRs as base materials for implantable drug depots, in the form of hydrogels, is discussed.Ministerio de Industria, Economía y Competitividad (proyectos PRI-PIBAR-2011–1403, MAT2012–38043, MAT2013–42473-R y MAT2013–41723-R)Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA152A12, VA155A12 y VA313U14)CIBER-BBN, y la Junta de Castilla y León y el Instituto de Salud Carlos III mediante el "Centro en Red de Medicina Regenerativa y Terapia Celular de Castilla y León

Amphiphilic Elastin-Like Block Co-Recombinamers Containing 2 Leucine Zippers: Cooperative Interplay between Both Domains 3 Results in Injectable and Stable Hydrogels

Many biological processes are regulated by reversible binding events, with these interactions between macromolecules representing the core of dynamic chemistry. As such, any attempt to gain a better understanding of such interactions, which would pave the way to the extrapolation of natural designs to create new advanced systems, is clearly of interest. This work focuses on the development of a leucine zipper-elastin-like recombinamer (ZELR) in order to elucidate the behavior of such domains when coexisting along the same molecule and to engineer reversible, injectable and stable hydrogels. The unique propensity of the Z-moiety selected to dimerize, together with the thermosensitive behavior of the ELR, which has been constructed as a thermosensitive amphiphilic tetrablock, has been engineered into a single recombinant molecule. In this molecular design, the Z-moieties are unable to form a network, while the ELR is below its Tt, thus, guaranteeing the liquid-like state of the system. However, this situation changes rapidly as the temperature increases above Tt, where a stable hydrogel is formed, as demostrated by rheological tests. The inability of the ELR molecule (without Z-domains) to form such a stable hydrogel above Tt clearly points to a positive cooperative effect between these two domains (Z and EL), and no conformational changes in the former are involved, as demonstrated by circular dichroism analysis. AFM shows that Z-motifs seem to induce the aggregation of micelles, which supports the enhanced stability displayed by ZELRs when compared to ELR at the macroscale level. To the best of our knowledge, this is the first time that such an interplay between these two domains has been reported. Furthermore, the cytocompatibility of the resulting hydrogels opens the door to their use in biomedical applications.Este trabajo forma parte de Proyectos de Investigación financiados por la Comisión Europea a través del Fondo Social Europeo (FSE) y el Fondo Europeo de Desarrollo Regional (ERDF), por el del MINECO (MAT2013-41723R, MAT2013-42473-R, MAT2012-38043 y PRI-PIBAR-2011-1403), la Junta de Castilla y León (VA049A11, VA152A12 y VA155A12) y el Instituto de Salud Carlos III bajo el Centro en Red de Medicina Regenerativa y Terapia Celular de Castilla y León

Macroporous click-elastin-like hydrogels for tissue engineering applications

Producción CientíficaElastin is a key extracellular matrix (ECM) protein that imparts functional elasticity to tissues and therefore an attractive candidate for bioengineering materials. Genetically engineered elastin-like recombinamers (ELRs) maintain inherent properties of the natural elastin (e.g. elastic behavior, bioactivity, low thrombogenicity, inverse temperature transition) while featuring precisely controlled composition, the possibility for biofunctionalization and non-animal origin. Recently the chemical modification of ELRs to enable their crosslinking via a catalyst-free click chemistry reaction, has further widened their applicability for tissue engineering. Despite these outstanding properties, the generation of macroporous click-ELR scaffolds with controlled, interconnected porosity has remained elusive so far. This significantly limits the potential of these materials as the porosity has a crucial role on cell infiltration, proliferation and ECM formation. In this study we propose a strategy to overcome this issue by adapting the salt leaching/gas foaming technique to click-ELRs. As result, macroporous hydrogels with tuned pore size and mechanical properties in the range of many native tissues were reproducibly obtained as demonstrated by rheological measurements and quantitative analysis of fluorescence, scanning electron and two-photon microscopy images. Additionally, the appropriate size and interconnectivity of the pores enabled smooth muscle cells to migrate into the click-ELR scaffolds and deposit extracellular matrix. The macroporous structure together with the elastic performance and bioactive character of ELRs, the specificity and non-toxic character of the catalyst-free click-chemistry reaction, make these scaffolds promising candidates for applications in tissue regeneration. This work expands the potential use of ELRs and click chemistry systems in general in different biomedical fields.Ministerio de Economía, Industria y Competitividad (Projects MAT2013-42473-R, MAT2015-68901-R, MAT2016- 78903-R)Junta de Castilla y León (programa de apoyo a proyectos de investigación - Ref. VA313U14, VA015U16 y PCIN-2015-010)gobierno federal y estatal de Alemania en el marco del Programa de Posición Rotacional i³tm (2014-R4-01) y del Programa START de la Facultad de Medicina de la Universidad de Aachen (proyecto nº 691713),el centro de imágenes del Centro Interdisciplinario de Investigación Clínica (IZKF) de la Facultad de Medicina de la Universidad de Aache

A Self-Organized ECM-Mimetic Model Based on an Amphiphilic Multiblock Silk-Elastin-Like co-Recombinamer with a Concomitant Dual Physical Gelation Process

Although significant progress has been made in the area of injectable hydrogels for biomedical applications and model cell niches, further improvements are still needed, especially in terms of mechanical performance, stability, and biomimicry of the native fibrillar architecture found in the extracellular matrix (ECM). This work focuses on the design and production of a silk-elastin-based injectable multiblock corecombinamer that spontaneously forms a stable physical nanofibrillar hydrogel under physiological conditions. That differs from previously reported silk-elastin-like polymers on a major content and predominance of the elastin-like part, as well as a more complex structure and behavior of such a part of the molecule, which is aimed to obtain well-defined hydrogels. Rheological and DSC experiments showed that this system displays a coordinated and concomitant dual gelation mechanism. In a first stage, a rapid, thermally driven gelation of the corecombinamer solution takes place once the system reaches body temperature due to the thermal responsiveness of the elastin-like (EL) parts and the amphiphilic multiblock design of the corecombinamer. A bridged micellar structure is the dominant microscopic feature of this stage, as demonstrated by AFM and TEM. Completion of the initial stage triggers the second, which is comprised of a stabilization, reinforcement, and microstructuring of the gel. FTIR analysis shows that these events involve the formation of β-sheets around the silk motifs. The emergence of such β-sheet structures leads to the spontaneous self-organization of the gel into the final fibrous structure. Despite the absence of biological cues, here we set the basis of the minimal structure that is able to display such a set of physical properties and undergo microscopic transformation from a solution to a fibrous hydrogel. The results point to the potential of this system as a basis for the development of injectable fibrillar biomaterial platforms toward a fully functional, biomimetic, artificial extracellular matrix, and cell niches.Este trabajo forma parte de Proyectos de Investigación financiados por la Comisión Europea a través del Fondo Europeo de Desarrollo Regional (ERDF), por el del MINECO (MAT2013-41723-R, MAT2013- 42473-R, PRI-PIBAR-2011-1403 y MAT2012-38043), la Junta de Castilla y León (VA049A11, VA152A12 y VA155A12) y el Instituto de Salud Carlos III bajo el Centro en Red de Medicina Regenerativa y Terapia Celular de Castilla y León

Optimasi Portofolio Resiko Menggunakan Model Markowitz MVO Dikaitkan dengan Keterbatasan Manusia dalam Memprediksi Masa Depan dalam Perspektif Al-Qur`an

Risk portfolio on modern finance has become increasingly technical, requiring the use of sophisticated mathematical tools in both research and practice. Since companies cannot insure themselves completely against risk, as human incompetence in predicting the future precisely that written in Al-Quran surah Luqman verse 34, they have to manage it to yield an optimal portfolio. The objective here is to minimize the variance among all portfolios, or alternatively, to maximize expected return among all portfolios that has at least a certain expected return. Furthermore, this study focuses on optimizing risk portfolio so called Markowitz MVO (Mean-Variance Optimization). Some theoretical frameworks for analysis are arithmetic mean, geometric mean, variance, covariance, linear programming, and quadratic programming. Moreover, finding a minimum variance portfolio produces a convex quadratic programming, that is minimizing the objective function ðð¥with constraintsð ð 𥠥 ðandð´ð¥ = ð. The outcome of this research is the solution of optimal risk portofolio in some investments that could be finished smoothly using MATLAB R2007b software together with its graphic analysis

Differential cross section measurements for the production of a W boson in association with jets in proton–proton collisions at √s = 7 TeV

Measurements are reported of differential cross sections for the production of a W boson, which decays into a muon and a neutrino, in association with jets, as a function of several variables, including the transverse momenta (pT) and pseudorapidities of the four leading jets, the scalar sum of jet transverse momenta (HT), and the difference in azimuthal angle between the directions of each jet and the muon. The data sample of pp collisions at a centre-of-mass energy of 7 TeV was collected with the CMS detector at the LHC and corresponds to an integrated luminosity of 5.0 fb[superscript −1]. The measured cross sections are compared to predictions from Monte Carlo generators, MadGraph + pythia and sherpa, and to next-to-leading-order calculations from BlackHat + sherpa. The differential cross sections are found to be in agreement with the predictions, apart from the pT distributions of the leading jets at high pT values, the distributions of the HT at high-HT and low jet multiplicity, and the distribution of the difference in azimuthal angle between the leading jet and the muon at low values.United States. Dept. of EnergyNational Science Foundation (U.S.)Alfred P. Sloan Foundatio

Juxtaposing BTE and ATE – on the role of the European insurance industry in funding civil litigation

One of the ways in which legal services are financed, and indeed shaped, is through private insurance arrangement. Two contrasting types of legal expenses insurance contracts (LEI) seem to dominate in Europe: before the event (BTE) and after the event (ATE) legal expenses insurance. Notwithstanding institutional differences between different legal systems, BTE and ATE insurance arrangements may be instrumental if government policy is geared towards strengthening a market-oriented system of financing access to justice for individuals and business. At the same time, emphasizing the role of a private industry as a keeper of the gates to justice raises issues of accountability and transparency, not readily reconcilable with demands of competition. Moreover, multiple actors (clients, lawyers, courts, insurers) are involved, causing behavioural dynamics which are not easily predicted or influenced. Against this background, this paper looks into BTE and ATE arrangements by analysing the particularities of BTE and ATE arrangements currently available in some European jurisdictions and by painting a picture of their respective markets and legal contexts. This allows for some reflection on the performance of BTE and ATE providers as both financiers and keepers. Two issues emerge from the analysis that are worthy of some further reflection. Firstly, there is the problematic long-term sustainability of some ATE products. Secondly, the challenges faced by policymakers that would like to nudge consumers into voluntarily taking out BTE LEI