275 research outputs found
Effect of ZnS Dispersoid in Structural and Electrical Properties of Plasticized CA-NH4I
AbstractPlasticized solid polymer electrolytes compose of cellulose acetate (CA) host polymer, ammonium iodide (NH4I) salt, propylene carbonate (PC) plasticizer were prepared by solution cast technique. The highest room temperature ionic conductivity (1.17 Ă 10-4 S cm-1) was achieved for sample with composition of CA: 25wt. % NH4I: 40wt. % PC. The addition of zinc sulfide (ZnS) dispersoid ceramic filler to the highest conductivity of plasticized CA-NH4I system enhanced the ionic conductivity up to 6.24 Ă 10-4 S cm-1 at room temperature. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy confirmed the complexation between polymer and salt. The disruption of the crystalline peaks of ZnS and NH4I on the X-ray diffraction (XRD) pattern of CA-NH4I, plasticized CA-NH4I and composited CA-NH4I-PC established the complexation between polymer and salt were takes place and reduce the crystallinity of the samples and hence increasing in ionic conductivity. The transference number suggested that the charge transport is predominantly due to ions
Virtual O(\a_s) corrections to the inclusive decay
We present in detail the calculation of the O(\a_s) virtual corrections to
the matrix element for b \to s \g. Besides the one-loop virtual corrections
of the electromagnetic and color dipole operators and , we include
the important two-loop contribution of the four-Fermi operator . By
applying the Mellin-Barnes representation to certain internal propagators, the
result of the two-loop diagrams is obtained analytically as an expansion in
. These results are then combined with existing O(\a_s)
Bremsstrahlung corrections in order to obtain the inclusive rate for B \to X_s
\g. The new contributions drastically reduce the large renormalization scale
dependence of the leading logarithmic result. Thus a very precise Standard
Model prediction for this inclusive process will become possible once also the
corrections to the Wilson coefficients are available.Comment: 29 pages, uses epsfig.sty, 12 postscript figures include
Nematicidal and allelopathic responses of Lantana camara root extract
The impact of root leachates of Lantana camara L., a tropical weed, against Meloidogyne javanica, the
root-knot nematode, was tested under laboratory and pot conditions. Concentrated and diluted root leachate caused
substantial mortality of M. javanica juveniles. Significant suppression of the nematode was achieved when soil was
treated with a full-strength concentration of the leachate. Whilst this high concentration retarded plant height and
shoot fresh weight, more diluted concentrations actually enhanced plant growth. To establish whether this inhibition
of plant growth from the leachate was the result of depleted nitrogen levels in the soil due to the leachate, soil treated
with such leachates was given urea as an additional nitrogen source. Urea not only enhanced nematode suppression
activity of the root leachates but also increased seedling emergence and growth of mungbean. Application of the L.
camara root leachates in combination with Pseudomonas aeruginosa, a plant growth-promoting rhizobacterium,
significantly reduced nematode population densities in roots and subsequent root-knot infection, and enhanced plant
growth. While a high concentration of root leachate slightly reduced P. aeruginosa colonization in the rhizosphere
and inner root tissues, the nematicidal efficacy of the bacterium was unaffected. The root leachate of L. camara was
found to contain phenolic compounds, including p-hydroxybenzoic acid, vanillic acid, caffeic acid, ferulic acid and a
quercetin glycoside, 7-glucoside. It also contained weak enzymic hydrogen cyanide
Tunneling times with covariant measurements
We consider the time delay of massive, non-relativistic, one-dimensional
particles due to a tunneling potential. In this setting the well-known Hartman
effect asserts that often the sub-ensemble of particles going through the
tunnel seems to cross the tunnel region instantaneously. An obstacle to the
utilization of this effect for getting faster signals is the exponential
damping by the tunnel, so there seems to be a trade-off between speedup and
intensity. In this paper we prove that this trade-off is never in favor of
faster signals: the probability for a signal to reach its destination before
some deadline is always reduced by the tunnel, for arbitrary incoming states,
arbitrary positive and compactly supported tunnel potentials, and arbitrary
detectors. More specifically, we show this for several different ways to define
``the same incoming state'' and ''the same detector'' when comparing the
settings with and without tunnel potential. The arrival time measurements are
expressed in the time-covariant approach, but we also allow the detection to be
a localization measurement at a later time.Comment: 12 pages, 2 figure
MULTI-RESPONSE OPTIMIZATION OF PLASTIC INJECTION MOULDING PROCESS USING GREY RELATIONAL ANALYSIS BASED IN TAGUCHI METHOD
This project investigates the multi-response optimization using grey relational analysis based in Taguchi method of plastic injection mould. Four input process parameters selected are mould temperature, melting temperature, injection time and cooling time. The responses investigated were part weight, shrinkage, warpage, ultimate tensile strength, tensile modulus and percentage of elongation. It is found that the optimum setting parameter generated from multi-response optimization is at run number 4 that are mould temperature at 56oC, melting temperature at 250oC, injection time at 0.7s and cooling time at 15.4s. Result of run number 4 for multi-response optimization for part weight, warpage, shrinkage, tensile ultimate strength, tensile modulus and percentage of elongation are 6.9807g, 0.087mm, 1.73%, 24.732MPa, 981.76MPa and 31.37%, respectively. Multi-response optimization results show that all response results are not higher or lower than experimental results. This is because multi-response optimization normalized all response value. Thus, by implemented multi-response optimization process, the materials characteristics value of plastic part can be predicted
Rescattering and chiral dynamics in B\to \rho\pi decay
We examine the role of B^0(\bar B^0) \to \sigma \pi^0 \to \pi^+\pi^- \pi^0
decay in the Dalitz plot analysis of B^0 (\bar B^0) \to \rho\pi \to
\pi^+\pi^-\pi^0 decays, employed to extract the CKM parameter \alpha. The
\sigma \pi channel is significant because it can break the relationship between
the penguin contributions in B\to\rho^0\pi^0, B\to\rho^+\pi^-, and
B\to\rho^-\pi^+ decays consequent to an assumption of isospin symmetry. Its
presence thus mimics the effect of isospin violation. The \sigma\pi^0 state is
of definite CP, however; we demonstrate that the B\to\rho\pi analysis can be
generalized to include this channel without difficulty. The \sigma or
f_0(400-1200) ``meson'' is a broad I=J=0 enhancement driven by strong \pi\pi
rescattering; a suitable scalar form factor is constrained by the chiral
dynamics of low-energy hadron-hadron interactions - it is rather different from
the relativistic Breit-Wigner form adopted in earlier B\to\sigma\pi and
D\to\sigma\pi analyses. We show that the use of this scalar form factor leads
to an improved theoretical understanding of the measured ratio Br(\bar B^0 \to
\rho^\mp \pi^\pm) / Br(B^-\to \rho^0 \pi^-).Comment: 26 pages, 8 figs, published version. typos fixed, minor change
Global trends of hand and wrist trauma: A systematic analysis of fracture and digit amputation using the Global Burden of Disease 2017 Study
Background: As global rates of mortality decrease, rates of non-fatal injury have increased, particularly in low Socio-demographic Index (SDI) nations. We hypothesised this global pattern of non-fatal injury would be demonstrated in regard to bony hand and wrist trauma over the 27-year study period. Methods: The Global Burden of Diseases, Injuries, and Risk Factors Study 2017 was used to estimate prevalence, age-standardised incidence and years lived with disability for hand trauma in 195 countries from 1990 to 2017. Individual injuries included hand and wrist fractures, thumb amputations and non-thumb digit amputations. Results: The global incidence of hand trauma has only modestly decreased since 1990. In 2017, t
Feasibility studies for the measurement of time-like proton electromagnetic form factors from pÂŻ pâ ÎŒ+ÎŒ- at P ÂŻ ANDA at FAIR
This paper reports on Monte Carlo simulation results for future measurements of the moduli of time-like proton electromagnetic form factors, | GE| and | GM| , using the pÂŻ pâ ÎŒ+ÎŒ- reaction at P ÂŻ ANDA (FAIR). The electromagnetic form factors are fundamental quantities parameterizing the electric and magnetic structure of hadrons. This work estimates the statistical and total accuracy with which the form factors can be measured at P ÂŻ ANDA , using an analysis of simulated data within the PandaRoot software framework. The most crucial background channel is pÂŻ pâ Ï+Ï-, due to the very similar behavior of muons and pions in the detector. The suppression factors are evaluated for this and all other relevant background channels at different values of antiproton beam momentum. The signal/background separation is based on a multivariate analysis, using the Boosted Decision Trees method. An expected background subtraction is included in this study, based on realistic angular distributions of the background contribution. Systematic uncertainties are considered and the relative total uncertainties of the form factor measurements are presented
Mapping geographical inequalities in childhood diarrhoeal morbidity and mortality in low-income and middle-income countries, 2000â17 : analysis for the Global Burden of Disease Study 2017
Background
Across low-income and middle-income countries (LMICs), one in ten deaths in children younger than 5 years is attributable to diarrhoea. The substantial between-country variation in both diarrhoea incidence and mortality is attributable to interventions that protect children, prevent infection, and treat disease. Identifying subnational regions with the highest burden and mapping associated risk factors can aid in reducing preventable childhood diarrhoea.
Methods
We used Bayesian model-based geostatistics and a geolocated dataset comprising 15â072â746 children younger than 5 years from 466 surveys in 94 LMICs, in combination with findings of the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017, to estimate posterior distributions of diarrhoea prevalence, incidence, and mortality from 2000 to 2017. From these data, we estimated the burden of diarrhoea at varying subnational levels (termed units) by spatially aggregating draws, and we investigated the drivers of subnational patterns by creating aggregated risk factor estimates.
Findings
The greatest declines in diarrhoeal mortality were seen in south and southeast Asia and South America, where 54·0% (95% uncertainty interval [UI] 38·1â65·8), 17·4% (7·7â28·4), and 59·5% (34·2â86·9) of units, respectively, recorded decreases in deaths from diarrhoea greater than 10%. Although children in much of Africa remain at high risk of death due to diarrhoea, regions with the most deaths were outside Africa, with the highest mortality units located in Pakistan. Indonesia showed the greatest within-country geographical inequality; some regions had mortality rates nearly four times the average country rate. Reductions in mortality were correlated to improvements in water, sanitation, and hygiene (WASH) or reductions in child growth failure (CGF). Similarly, most high-risk areas had poor WASH, high CGF, or low oral rehydration therapy coverage.
Interpretation
By co-analysing geospatial trends in diarrhoeal burden and its key risk factors, we could assess candidate drivers of subnational death reduction. Further, by doing a counterfactual analysis of the remaining disease burden using key risk factors, we identified potential intervention strategies for vulnerable populations. In view of the demands for limited resources in LMICs, accurately quantifying the burden of diarrhoea and its drivers is important for precision public health
Measurement of the View the tt production cross-section using eÎŒ events with b-tagged jets in pp collisions at âs = 13 TeV with the ATLAS detector
This paper describes a measurement of the inclusive top quark pair production cross-section (ÏttÂŻ) with a data sample of 3.2 fbâ1 of protonâproton collisions at a centre-of-mass energy of âs = 13 TeV, collected in 2015 by the ATLAS detector at the LHC. This measurement uses events with an opposite-charge electronâmuon pair in the final state. Jets containing b-quarks are tagged using an algorithm based on track impact parameters and reconstructed secondary vertices. The numbers of events with exactly one and exactly two b-tagged jets are counted and used to determine simultaneously ÏttÂŻ and the efficiency to reconstruct and b-tag a jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section is measured to be:
ÏttÂŻ = 818 ± 8 (stat) ± 27 (syst) ± 19 (lumi) ± 12 (beam) pb,
where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, the integrated luminosity and the LHC beam energy, giving a total relative uncertainty of 4.4%. The result is consistent with theoretical QCD calculations at next-to-next-to-leading order. A fiducial measurement corresponding to the experimental acceptance of the leptons is also presented
- âŠ