135 research outputs found
Extracting the Pair Distribution Function of Liquids and Liquid-Vapor Surfaces by Grazing Incidence X-ray Diffraction Mode
We show that the structure factor of water can be obtained from X-ray
synchrotron experiments at grazing angle of incidence (in reflection mode) by
using a liquid surface diffractometer. The corrections used to obtain
self-consistently are described. Applying these corrections to scans at
different incident beam angles (above the critical angle) collapses the
measured intensities into a single master curve, without fitting parameters,
which within a scale factor yields . Performing the measurements below
the critical angle for total reflectivity yields the structure factor of the
top most layers of the water/vapor interface. Our results indicate water
restructuring at the vapor/water interface. We also introduce a new approach to
extract , the pair distribution function (PDF), by expressing the PDF as
a linear sum of Error functions whose parameters are refined by applying a
non-linear least square fit method. This approach enables a straightforward
determination of the inherent uncertainties in the PDF. Implications of our
results to previously measured and theoretical predictions of the PDF are also
discussed
Three-dimensional X-ray diffraction imaging of process-induced dislocation loops in silicon
In the semiconductor industry, wafer handling introduces micro-cracks at the wafer edge and the causal relationship of these cracks to wafer breakage is a difficult task. By way of understanding the wafer breakage process, a series of nano-indents were introduced both into 20 20 mm (100) wafer pieces and into whole wafers as a means of introducing controlled strain. Visualization of the three-dimensional structure of crystal defects has been demonstrated. The silicon samples were then treated by various thermal anneal processes to initiate the formation of dislocation loops around the indents. This article reports the three-dimensional X-ray diffraction imaging and visualization of the structure of these dislocations. A series of X-ray section topographs of both the indents and the dislocation loops were taken at the ANKA Synchrotron, Karlsruhe, Germany. The topographs were recorded on a CCD system combined with a high-resolution scintillator crystal and were measured by repeated cycles of exposure and sample translation along a direction perpendicular to the beam. The resulting images were then rendered into three dimensions utilizing opensource three-dimensional medical tomography algorithms that show the dislocation loops formed. Furthermore this technique allows for the production of a video (avi) file showing the rotation of the rendered topographs around any defined axis. The software also has the capability of splitting the image along a segmentation line and viewing the internal structure of the strain fields
Rethinking Equality in the Global Society
The future of affirmative action, especially in the area of American higher education, has been called into question by the 1996 decision of the U.S. Court of Appeals for the Fifth Circuit in Hopwood v. State of Texas, requiring race-blind admission to state universities in Texas, and the passage of Proposition 209 in California. The seemingly endless American debate on this issue almost entirely has ignored the fact that other countries faced with comparable problems of remedying the effects of past discrimination have developed programs and acquired experience from which Americans might learn. Further, the legal debate has not been adequately informed by the social science disciplines. This conference was intended to expand discussion at a critical moment by introducing these missing perspectives
The internal structure of poly(methyl methacrylate) latexes in nonpolar solvents
Hypothesis: Poly(methyl methacrylate) (PMMA) latexes in nonpolar solvents are an excellent model system to understand phenomena in low dielectric media, and understanding their internal structure is critical to characterizing their performance in both fundamental studies of colloidal interactions and in potential industrial applications. Both the PMMA cores and the poly(12-hydroxystearic acid) (PHSA) shells of the latexes are known to be penetrable by solvent and small molecules, but the relevance of this for the properties of these particles is unknown.
Experiments: These particles can be prepared in a broad range of sizes, and two PMMA latexes dispersed in n-dodecane (76 and 685 nm in diameter) were studied using techniques appropriate to their size. Small-angle scattering (using both neutrons and X-rays) was used to study the small latexes, and analytical centrifugation was used to study the large latexes. These studies enabled the calculation of the core densities and the amount of solvent in the stabilizer shells for both latexes. Both have consequences on interpreting measurements using these latexes.
Findings: The PHSA shells are highly solvated (∼85% solvent by volume), as expected for effective steric stabilizers. However, the PHSA chains do contribute to the intensity of neutron scattering measurements on concentrated dispersions and cannot be ignored. The PMMA cores have a slightly lower density than PMMA homopolymer, which shows that only a small free volume is required to allow small molecules to penetrate into the cores. Interestingly, the observations are essentially the same, regardless of the size of the particle; these are general features of these polymer latexes. Despite the latexes being used as a model physical system, the internal chemical structure is complex and must be fully considered when characterizing them
Glass transitions in native silk fibres studied by dynamic mechanical thermal analysis
Silks are a family of semi-crystalline structural materials, spun naturally by insects, spiders and even crustaceans. Compared to the characteristic β-sheet crystalline structure in silks, the non-crystalline structure and its composition deserves more attention as it is equally critical to the filaments' high toughness and strength. Here we further unravel the structure-property relationship in silks using Dynamic Mechanical Thermal Analysis (DMTA). This technique allows us to examine the most important structural relaxation event of the disordered structure the disordered structure, the glass transition (GT), in native silk fibres of the lepidopteran Bombyx mori and Antheraea pernyi and the spider Nephila edulis. The measured glass transition temperature Tg, loss tangent tan δ and dynamic storage modulus are quantitatively modelled based on Group Interaction Modelling (GIM). The "variability" issue in native silks can be conveniently explained by the different degrees of structural disorder as revealed by DMTA. The new insights will facilitate a more comprehensive understanding of the structure-property relations for a wide range of biopolymers
Amelogenin Nanoparticles in Suspension: Deviations from Spherical Shape and pH-Dependent Aggregation
It is well-known that amelogenin self-assembles to form nanoparticles, usually referred to as amelogenin nanospheres, despite the fact that not much is known about their actual shape in solution. In the current paper, we combine SAXS and DLS to study the three-dimensional shape of the recombinant amelogenins rP172 and rM179. Our results show for the first time that amelogenins build oblate nanoparticles in suspension using experimental approaches that do not require the proteins to be in contact with a support material surface. The SAXS studies give evidence for the existence of isolated amelogenin nano-oblates with aspect ratios in the range of 0.45-0.5 at pH values higher than pH 7.2 and show an aggregation of these nano-oblates at lower pH values. The role of the observed oblate shape in the formation of chain-like structures at physiological conditions is discussed as a key factor in the biomineralization of dental enamel
The Salmonella enterica ZinT structure, zinc affinity and interaction with the high-affinity uptake protein ZnuA provide insight into the management of periplasmic zinc
2017 publication guidelines for structural modelling of small-angle scattering data from biomolecules in solution: an update
- …