3,433 research outputs found
Design, Implementation and First Measurements with the Medipix Neutron Camera in CMS
The Medipix detector is the first device dedicated to measuring mixed-field
radiation in the CMS cavern and able to distinguish between different particle
types. Medipix2-MXR chips bump bonded to silicon sensors with various neutron
conversion layers developed by the IEAP CTU in Prague were successfully
installed for the 2008 LHC start-up in the CMS experimental and services
caverns to measure the flux of various particle types, in particular neutrons.
They have operated almost continuously during the 2010 run period, and the
results shown here are from the proton run between the beginning of July and
the end of October 2010. Clear signals are seen and different particle types
have been observed during regular LHC luminosity running, and an agreement in
the measured flux rate is found with the simulations. These initial results are
promising, and indicate that these devices have the potential for further and
future LHC and high energy physics applications as radiation monitoring devices
for mixed field environments, including neutron flux monitoring. Further
extensions are foreseen in the near future to increase the performance of the
detector and its coverage for monitoring in CMS.Comment: 15 pages, 16 figures, submitted to JINS
Comparison of measurement and simulation of ATLAS cavern radiation background
Sixteen Medipix2 pixel detector based (MPX) devices were operated at various positions within the ATLAS detector and cavern continuously from early 2008 up to 2013. In addition to photons, each MPX detector is capable to detect charged particles, and neutrons as it is covered with a mask of converter materials dividing its area into regions sensitive to thermal or fast neutrons. The MPX detector network was effectively used for real-time measurements of the spectral characteristics and composition of complex radiation fields in ATLAS. This article reports comparison of the results of measurements performed with MPX detectors during the LHC operation period in 2010 and 2011 with Monte Carlo simulations results from the FLUGG and GCALOR codes. For the purpose of this comparison, the MPX detectors were operated in tracking mode with low threshold (8-10 keV) allowing one to distinguish among particle categories based on the recognition of track patterns left by the particles in the MPX sensitive layer. The comparison of measurements with simulations shows that the agreement between measured and simulated data is satisfactory in most cases within a factor of two
BrachyView, A novel inbody imaging system for HDR prostate brachytherapy: Design and Monte Carlo feasibility study
Purpose: High dose rate (HDR) brachytherapy is a form of radiation therapy for treating prostate cancer whereby a high activity radiation source is moved between predefined positions inside applicators inserted within the treatment volume. Accurate positioning of the source is essential in delivering the desired dose to the target area while avoiding radiation injury to the surrounding tissue. In this paper, HDR BrachyView, a novel inbody dosimetric imaging system for real time monitoring and verification of the radioactive seed position in HDR prostate brachytherapy treatment is introduced. The current prototype consists of a 15 × 60 mm2 silicon pixel detector with a multipinhole tungsten collimator placed 6.5 mm above the detector. Seven identical pinholes allow full imaging coverage of the entire treatment volume. The combined pinhole and pixel sensor arrangement is geometrically designed to be able to resolve the three-dimensional location of the source. The probe may be rotated to keep the whole prostate within the transverse plane. The purpose of this paper is to demonstrate the efficacy of the design through computer simulation, and to estimate the accuracy in resolving the source position (in detector plane and in 3D space) as part of the feasibility study for the BrachyView project. Methods: Monte Carlo simulations were performed using the GEANT4 radiation transport model, with a 192Ir source placed in different locations within a prostate phantom. A geometrically accurate model of the detector and collimator were constructed. Simulations were conducted with a single pinhole to evaluate the pinhole design and the signal to background ratio obtained. Second, a pair of adjacent pinholes were simulated to evaluate the error in calculated source location. Results: Simulation results show that accurate determination of the true source position is easily obtainable within the typical one second source dwell time. The maximum error in the estimated projection position was found to be 0.95 mm in the imaging (detector) plane, resulting in a maximum source positioning estimation error of 1.48 mm. Conclusions: HDR BrachyView is a feasible design for real-time source tracking in HDR prostate brachytherapy. It is capable of resolving the source position within a subsecond dwell time. In combination with anatomical information obtained from transrectal ultrasound imaging, HDR BrachyView adds a significant quality assurance capability to HDR brachytherapy treatment systems. © 2013 American Association of Physicists in Medicine
Photophysical Heavy-Atom Effect in Iodinated Metallocorroles: Spin-Orbit Coupling and Density of States
This work was supported by COST Actions CM1202 and CM1405 Actions, the Czech Science
Foundation (GAČR) grant 17-011375, and the Swiss NSF via the NCCR:MUST, contracts n°
200021_137717 and IZK0Z2_150425
Enhanced triplet superconductivity in next generation ultraclean UTe2
The spin-triplet superconductor UTe exhibits a myriad of exotic physical
phenomena, including the possession of three distinct superconducting phases at
ambient pressure for magnetic field 40 T aligned in certain
orientations. However, contradictory reports between studies performed on
UTe specimens of varying quality have severely impeded theoretical efforts
to understand the microscopic properties of this material. Here, we report high
magnetic field measurements on a new generation of ultraclean UTe
specimens, which possess enhanced superconducting critical temperatures and
fields compared to previous sample generations. Remarkably, for applied
close to the hard magnetic direction, we find that the angular extent of
magnetic field-reinforced superconductivity is significantly increased in these
high purity crystals. This suggests that, in proximity to a field-induced
metamagnetic transition, the enhanced role of magnetic fluctuations - that are
strongly suppressed by disorder - is likely responsible for tuning UTe
between two distinct spin-triplet superconducting phases. Our results reveal a
strong sensitivity to crystalline disorder of the field-reinforced
superconducting state of UTe
Competing charge transfer pathways at the photosystem II-electrode interface.
The integration of the water-oxidation enzyme photosystem II (PSII) into electrodes allows the electrons extracted from water oxidation to be harnessed for enzyme characterization and to drive novel endergonic reactions. However, PSII continues to underperform in integrated photoelectrochemical systems despite extensive optimization efforts. Here we carried out protein-film photoelectrochemistry using spinach and Thermosynechococcus elongatus PSII, and we identified a competing charge transfer pathway at the enzyme-electrode interface that short-circuits the known water-oxidation pathway. This undesirable pathway occurs as a result of photo-induced O2 reduction occurring at the chlorophyll pigments and is promoted by the embedment of PSII in an electron-conducting fullerene matrix, a common strategy for enzyme immobilization. Anaerobicity helps to recover the PSII photoresponse and unmasks the onset potentials relating to the QA/QB charge transfer process. These findings impart a fuller understanding of the charge transfer pathways within PSII and at photosystem-electrode interfaces, which will lead to more rational design of pigment-containing photoelectrodes in general.This work was supported by the U.K. Engineering and Physical Sciences Research Council (EP/H00338X/2 to E. Reisner), the U.K. Biology and Biotechnological Sciences Research Council (BB/K010220/1 to E. Reisner), a Marie Curie International Incoming Fellowship (PIIF-GA-2012-328085 RPSII to J.J.Z.). N.P. was supported by the Winton Fund for the Physics of Sustainability. E. Romero. and R.v.G. were supported by the VU University Amsterdam, the Laserlab-Europe Consortium, the TOP grant (700.58.305) from the Foundation of Chemical Sciences part of NWO, the Advanced Investigator grant (267333, PHOTPROT) from the European Research Council, and the EU FP7 project PAPETS (GA 323901). R.v.G. gratefully acknowledges his `Academy Professor' grant from the Royal Netherlands Academy of Arts and Sciences (KNAW). We would also like to thank Miss Katharina Brinkert and Prof A. William Rutherford for a sample of T. elongatus PSII, and H. v. Roon for preparation of the spinach PSII samples
Challenges in QCD matter physics - The Compressed Baryonic Matter experiment at FAIR
Substantial experimental and theoretical efforts worldwide are devoted to
explore the phase diagram of strongly interacting matter. At LHC and top RHIC
energies, QCD matter is studied at very high temperatures and nearly vanishing
net-baryon densities. There is evidence that a Quark-Gluon-Plasma (QGP) was
created at experiments at RHIC and LHC. The transition from the QGP back to the
hadron gas is found to be a smooth cross over. For larger net-baryon densities
and lower temperatures, it is expected that the QCD phase diagram exhibits a
rich structure, such as a first-order phase transition between hadronic and
partonic matter which terminates in a critical point, or exotic phases like
quarkyonic matter. The discovery of these landmarks would be a breakthrough in
our understanding of the strong interaction and is therefore in the focus of
various high-energy heavy-ion research programs. The Compressed Baryonic Matter
(CBM) experiment at FAIR will play a unique role in the exploration of the QCD
phase diagram in the region of high net-baryon densities, because it is
designed to run at unprecedented interaction rates. High-rate operation is the
key prerequisite for high-precision measurements of multi-differential
observables and of rare diagnostic probes which are sensitive to the dense
phase of the nuclear fireball. The goal of the CBM experiment at SIS100
(sqrt(s_NN) = 2.7 - 4.9 GeV) is to discover fundamental properties of QCD
matter: the phase structure at large baryon-chemical potentials (mu_B > 500
MeV), effects of chiral symmetry, and the equation-of-state at high density as
it is expected to occur in the core of neutron stars. In this article, we
review the motivation for and the physics programme of CBM, including
activities before the start of data taking in 2022, in the context of the
worldwide efforts to explore high-density QCD matter.Comment: 15 pages, 11 figures. Published in European Physical Journal
Search for direct stau production in events with two hadronic tau-leptons in root s=13 TeV pp collisions with the ATLAS detector
A search for the direct production of the supersymmetric partners ofτ-leptons (staus) in final stateswith two hadronically decayingτ-leptons is presented. The analysis uses a dataset of pp collisions corresponding to an integrated luminosity of139fb−1, recorded with the ATLAS detector at the LargeHadron Collider at a center-of-mass energy of 13 TeV. No significant deviation from the expected StandardModel background is observed. Limits are derived in scenarios of direct production of stau pairs with eachstau decaying into the stable lightest neutralino and oneτ-lepton in simplified models where the two staumass eigenstates are degenerate. Stau masses from 120 GeV to 390 GeV are excluded at 95% confidencelevel for a massless lightest neutralino
- …