Assessing the Extent to Which Staff Training Needs are Analyzed at Kenya Polytechnic University College, Nairobi

Training is concerned with adopting the individual in the job, in the shortest possible time, consistent with good quality. Systematic training can bring effective quality, reduction in wastage (scrap), a greater job-knowledge with a sense of purpose and achievement. Training should improve workers’ competences, equip them for higher level work, increase the quality of output or performance and enhance morale. A training need can be defined as the gap between the requirements for skills and knowledge inherent in the job and those possessed by the current job holder. Kenya Polytechnic has recently been upgraded to a status of University College. Thus, need to assess the training needs of its personnel. To ensure that resources do not go to waste, there is need to conduct a thorough analysis of training needs. Staff training is the key to any productive workforce in any organization. The staff needs to be self-propelled in updating themselves and rekindling their work morale and sharpening of their working skills. Technology is forever changing and work methodologies as the world continually becomes a global village. In this study, the extent of training needs analysis (TNA) conducted at Kenya Polytechnic University College which is undergoing transformation was established with the aim of find out why TNA was carried out. To achieve this, the study employed descriptive survey design where 73 questionnaires for data collection were administered. A pilot study was conducted to enhance validity of the instrument. The data was coded and entered in a statistical package for analysis. Simple descriptive statistics, frequencies and percentages were used in the analysis. The results showed that there was need to carry out TNA at KPUC in view of transforming it into University College. This was because most of the staff had not attended any TNA before, thus needed the training to enable them cope with the new rank of the college and its quality assurance demands, training needs were identified and this included need to revise the content, method of teaching, timing and duration of the training, From this study, it was concluded that there was need to carry out TNA at KPUC in few of transforming it into University College because most of the staff had not attended any TNA before thus needed the training to enable them cope with the new rank of the college and its quality assurance demands. Training needs were identified and this included need to revise the content, method, timing and duration of the training. KEY WORDS: Training needs analysis, training needs and work moral

Test-beam Performance Results of the FASTPIX Sub-Nanosecond CMOS Pixel Sensor Demonstrator

Within the ATTRACT FASTPIX project, a monolithic pixel sensor demonstrator chip has been developed in a modified 180 nm CMOS imaging process technology, targeting sub-nanosecond timing precision for single ionising particles. It features a small collection electrode design on a 25 micrometers-thick epitaxial layer and contains 32 mini matrices of 68 hexagonal pixels each, with pixel pitches ranging from 8.66 to 20 micrometers. Four pixels are transmitting an analog output signal and 64 are transmitting binary hit information. Various design variations are explored, aiming at accelerating the charge collection and making the timing of the charge collection more uniform over the pixel area. Signal treatment of the analog waveforms, as well as reconstruction of digital position, time and charge information, is carried out off-chip. This contribution introduces the design of the sensor and readout system and presents performance results for various pixel designs achieved in recent test beam measurements with external tracking and timing reference detectors. A time resolution below 150 ps is obtained at full efficiency for all pixel pitches.Comment: 14 pages, 15 figures, submitted to NIMA (special issue for ULITIMA 2023 conference

Kosteneffiziente Technologien zur geometrischen Datenaufnahme im digitalen Reverse Engineering

Zusammenfassung Der vorliegende Beitrag schlägt eine Auswahlmethode vor, die geeignete Verfahren zur kosteneffizienten Rekonstruktion geometrischer Daten von Baugruppen und Bauteilen aufzeigt. Dabei werden verschiedene objektbezogene Einflussfaktoren wie beispielsweise die Bauteilkomplexität, vorhandene Standardfeatures (z.B. genormte Gewindebohrungen) oder besondere Oberflächengeometrien berücksichtigt. Darüber hinaus werden verschiedene Techniken anhand der Kriterien zeitlicher Aufwand, technologischer Aufwands und erzielbarer Maßgenauigkeit quantitativ verglichen. Dadurch kann der Anwender einen erforderlichen Kompromiss zwischen kostenmäßigem Aufwand und erzielbarer Maßgenauigkeit abschätzen

Transient Monte Carlo Simulations for the Optimisation and Characterisation of Monolithic Silicon Sensors

An ever-increasing demand for high-performance silicon sensors requires complex sensor designs that are challenging to simulate and model. The combination of electrostatic finite element simulations with a transient Monte Carlo approach provides simultaneous access to precise sensor modelling and high statistics. The high simulation statistics enable the inclusion of Landau fluctuations and production of secondary particles, which offers a realistic simulation scenario. The transient simulation approach is an important tool to achieve an accurate time-resolved description of the sensor, which is crucial in the face of novel detector prototypes with increasingly precise timing capabilities. The simulated time resolution as a function of operating parameters as well as the full transient pulse can be monitored and assessed, which offers a new perspective on the optimisation and characterisation of silicon sensors. In this paper, a combination of electrostatic finite-element simulations using 3D TCAD and transient Monte Carlo simulations with the Allpix Squared framework are presented for a monolithic CMOS pixel sensor with a small collection diode, that is characterised by a highly inhomogeneous, complex electric field. The results are compared to transient 3D TCAD simulations that offer a precise simulation of the transient behaviour but long computation times. Additionally, the simulations are benchmarked against test-beam data and good agreement is found for the performance parameters over a wide range of different operation conditions

Developing a Monolithic Silicon Sensor in a 65 nm CMOS Imaging Technology for Future Lepton Collider Vertex Detectors

Monolithic CMOS sensors in a 65 nm imaging technology are being investigated by the CERN EP Strategic R&D Programme on Technologies for Future Experiments for an application in particle physics. The appeal of monolithic detectors lies in the fact that both sensor volume and readout electronics are integrated in the same silicon wafer, providing a reduction in production effort, costs and scattering material. The Tangerine Project WP1 at DESY participates in the Strategic R&D Programme and is focused on the development of a monolithic active pixel sensor with a time and spatial resolution compatible with the requirements for a future lepton collider vertex detector. By fulfilling these requirements, the Tangerine detector is suitable as well to be used as telescope planes for the DESY-II Test Beam facility. The project comprises all aspects of sensor development, from the electronics engineering and the sensor design using simulations, to laboratory and test beam investigations of prototypes. Generic TCAD Device and Monte-Carlo simulations are used to establish an understanding of the technology and provide important insight into performance parameters of the sensor. Testing prototypes in laboratory and test beam facilities allows for the characterization of their response to different conditions. By combining results from all these studies it is possible to optimize the sensor layout. This contribution presents results from generic TCAD and Monte-Carlo simulations, and measurements performed with test chips of the first sensor submission.Comment: 7 pages, 8 figures, submitted to IEEE Xplore as conference record for 2022 IEEE NSS/MIC/RTS

Antimicrobial resistance among migrants in Europe: a systematic review and meta-analysis

BACKGROUND: Rates of antimicrobial resistance (AMR) are rising globally and there is concern that increased migration is contributing to the burden of antibiotic resistance in Europe. However, the effect of migration on the burden of AMR in Europe has not yet been comprehensively examined. Therefore, we did a systematic review and meta-analysis to identify and synthesise data for AMR carriage or infection in migrants to Europe to examine differences in patterns of AMR across migrant groups and in different settings. METHODS: For this systematic review and meta-analysis, we searched MEDLINE, Embase, PubMed, and Scopus with no language restrictions from Jan 1, 2000, to Jan 18, 2017, for primary data from observational studies reporting antibacterial resistance in common bacterial pathogens among migrants to 21 European Union-15 and European Economic Area countries. To be eligible for inclusion, studies had to report data on carriage or infection with laboratory-confirmed antibiotic-resistant organisms in migrant populations. We extracted data from eligible studies and assessed quality using piloted, standardised forms. We did not examine drug resistance in tuberculosis and excluded articles solely reporting on this parameter. We also excluded articles in which migrant status was determined by ethnicity, country of birth of participants' parents, or was not defined, and articles in which data were not disaggregated by migrant status. Outcomes were carriage of or infection with antibiotic-resistant organisms. We used random-effects models to calculate the pooled prevalence of each outcome. The study protocol is registered with PROSPERO, number CRD42016043681. FINDINGS: We identified 2274 articles, of which 23 observational studies reporting on antibiotic resistance in 2319 migrants were included. The pooled prevalence of any AMR carriage or AMR infection in migrants was 25·4% (95% CI 19·1-31·8; I2 =98%), including meticillin-resistant Staphylococcus aureus (7·8%, 4·8-10·7; I2 =92%) and antibiotic-resistant Gram-negative bacteria (27·2%, 17·6-36·8; I2 =94%). The pooled prevalence of any AMR carriage or infection was higher in refugees and asylum seekers (33·0%, 18·3-47·6; I2 =98%) than in other migrant groups (6·6%, 1·8-11·3; I2 =92%). The pooled prevalence of antibiotic-resistant organisms was slightly higher in high-migrant community settings (33·1%, 11·1-55·1; I2 =96%) than in migrants in hospitals (24·3%, 16·1-32·6; I2 =98%). We did not find evidence of high rates of transmission of AMR from migrant to host populations. INTERPRETATION: Migrants are exposed to conditions favouring the emergence of drug resistance during transit and in host countries in Europe. Increased antibiotic resistance among refugees and asylum seekers and in high-migrant community settings (such as refugee camps and detention facilities) highlights the need for improved living conditions, access to health care, and initiatives to facilitate detection of and appropriate high-quality treatment for antibiotic-resistant infections during transit and in host countries. Protocols for the prevention and control of infection and for antibiotic surveillance need to be integrated in all aspects of health care, which should be accessible for all migrant groups, and should target determinants of AMR before, during, and after migration. FUNDING: UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College Healthcare Charity, the Wellcome Trust, and UK National Institute for Health Research Health Protection Research Unit in Healthcare-associated Infections and Antimictobial Resistance at Imperial College London

Digital Pixel Test Structures implemented in a 65 nm CMOS process

The ALICE ITS3 (Inner Tracking System 3) upgrade project and the CERN EP R&D on monolithic pixel sensors are investigating the feasibility of the Tower Partners Semiconductor Co. 65 nm process for use in the next generation of vertex detectors. The ITS3 aims to employ wafer-scale Monolithic Active Pixel Sensors thinned down to 20 to 40 um and bent to form truly cylindrical half barrels. Among the first critical steps towards the realisation of this detector is to validate the sensor technology through extensive characterisation both in the laboratory and with in-beam measurements. The Digital Pixel Test Structure (DPTS) is one of the prototypes produced in the first sensor submission in this technology and has undergone a systematic measurement campaign whose details are presented in this article. The results confirm the goals of detection efficiency and non-ionising and ionising radiation hardness up to the expected levels for ALICE ITS3 and also demonstrate operation at +20 C and a detection efficiency of 99% for a DPTS irradiated with a dose of $10^{15}$ 1 MeV n$_{\mathrm{eq}}/$cm$^2$. Furthermore, spatial, timing and energy resolutions were measured at various settings and irradiation levels.Comment: Updated threshold calibration method. Implemented colorblind friendly color palette in all figures. Updated reference

A review of the changing culture and social context relating to forensic facial depiction of the dead

The recognition of a decedent by a family member is commonplace in forensic investigation and is often employed as identity confirmation. However, it is recognised that misidentification from facial recognition is also common and faces of the dead may be extremely difficult to recognise due to decomposition or external damage, and even immediate post-mortem changes may be significant enough to confuse an observer. The depiction of faces of the dead can be a useful tool for promoting recognition leading to identification and post-mortem facial depiction is described as the interpretation of human remains in order to suggest the living appearance of an individual. This paper provides an historical context relating to the changing view of society to the presentation and publication of post-mortem facial depictions and discusses the current ethical, practical and academic challenges associated with these images