18 research outputs found
Standalone direct pumping photovoltaic system or energy storage in batteries for supplying irrigation networks. Cost analysis
[EN] Solar photovoltaic systems have become one of the most popular topics in the water management industry.
Moreover, irrigation networks are water- and energy-hungry, and utilitymanagers are likely to adaptwater consumption
(and consequently energy demand) to the hours inwhich there is energy availability. In countries such
as Spain (with high irradiance values), solar energy is an available green alternative characterised by zero electricity
costs and significantly lower environmental impact. In this work, several types of irrigation scheduled
programmes (according to different irrigation sectors) that minimise the number of photovoltaic solar panels
to be installed are studied; moreover, the effects of the variable costs linked to energy (energy and emissions
costs) are presented. Finally, the effect of incorporating batteries for storing energy to protect the system against
emergencies, such as unfavourable weather, is proposed. The irrigation hours available to satisfywater demands
are limited by sunlight; they are also limited by the condition that the irrigation schedule type has to be rigid
(predetermined rotation) and that the pressure at any node has to be above minimumpressure required by standards.
A real case study is performed, and the results obtained demonstrate that there is no universal solution;
this is because the portfolio of alternatives is based on investments for purchasing equipment at present and
also on future energy savings (revenues). Apart from these two values, there is an economic value (equivalent
discontinuous discount rate), which also influences the final results.This work was supported by the research project “GESAEN” through the 2016 call of the Vicerrectorado de Investigación, Desarrollo e Innovación de la Universidad de Alicante GRE-16-08.Pardo Picazo, MA.; Manzano Juarez, J.; Valdes-Abellan, J.; Cobacho Jordán, R. (2019). Standalone direct pumping photovoltaic system or energy storage in batteries for supplying irrigation networks. Cost analysis. The Science of The Total Environment. 673:821-830. https://doi.org/10.1016/j.scitotenv.2019.04.050S82183067
Drone-based imaging to assess the microbial water quality in an irrigation pond: A pilot study
Microbial water quality datasets are essential in irrigated agricultural practices to detect and inform measures to prevent the contamination of produce. Escherichia coli (E. coli) concentrations are commonly used to evaluate microbial water quality. Remote sensing imagery has been successfully used to retrieve several water quality parameters that can be determinants of E. coli habitats in waterbodies. This pilot study was conducted to test the possibility of using imagery from a small unmanned aerial vehicle (sUAV or drone) to improve the estimation of microbial water quality in small irrigation ponds. In situ measurements of pH, turbidity, specific conductance, and concentrations of dissolved oxygen, chlorophyll-a, phycocyanin, and fluorescent dissolved organic matter were taken at depths of 0–15 cm in 23 locations across a pond in Central Maryland, USA. The pond surface was concurrently imaged using a drone with three modified GoPro cameras, and a multispectral MicaSense RedEdge camera with five spectral bands. The GoPro imagery was decomposed into red, blue, and green components. Mean digital numbers for 1-m radius areas in the images were combined with the water quality data to provide input for a regression tree-based analysis. The accuracy of the regression-tree data description with “only imagery” inputs was the same or better than that of trees constructed with “only water-quality parameters” as inputs. From multiple cross-validation runs with “only imagery” inputs for the regression trees, the average (±SD) determination coefficient and root-mean-squared error of the decimal logarithm of E. coli concentrations were 0.793 ± 0.035 and 0.131 ± 0.011, respectively. The results of this study demonstrate the opportunities for using sUAV imagery for obtaining a more accurate delineation of the spatial variation of E. coli concentrations in irrigation ponds
Stakeholders’ Perspective on Groundwater Management in Four Water-Stressed Mediterranean Areas: Priorities and Challenges
Recent studies highlight the fragility of the Mediterranean basin against climate stresses and the difficulties of managing the sustainable development of groundwater resources. In this work, the main issues related to groundwater management have been identified from the stake-holder’s perspective in the following four representative water-stressed Mediterranean areas: the coastal aquifer of Comacchio (Italy), the Alto Guadalentín aquifer (Spain), the alluvial aquifer of the Gediz River basin (Turkey), and the Azraq aquifer (Azraq Wetland Reserve, Jordan). This has been achieved by designing a methodology to involve and engage a representative set of stakeholders, including a questionnaire to learn their point of view concerning the current management of aquifer systems and their experience with the already available tools for groundwater resource manage-ment, such as monitoring networks and numerical models. The outcome of the survey has allowed us to identify both particular and common challenges among the four study sites and among the various groups of stakeholders. This information provides valuable insights to improve the transfer of scientific knowledge from the research centers to the authorities managing the groundwater resources and it will help to plan more effective research activities on aquifer management. The proposed methodology could be applied in other aquifers facing similar problems
Elective Cancer Surgery in COVID-19-Free Surgical Pathways During the SARS-CoV-2 Pandemic: An International, Multicenter, Comparative Cohort Study.
PURPOSE: As cancer surgery restarts after the first COVID-19 wave, health care providers urgently require data to determine where elective surgery is best performed. This study aimed to determine whether COVID-19-free surgical pathways were associated with lower postoperative pulmonary complication rates compared with hospitals with no defined pathway. PATIENTS AND METHODS: This international, multicenter cohort study included patients who underwent elective surgery for 10 solid cancer types without preoperative suspicion of SARS-CoV-2. Participating hospitals included patients from local emergence of SARS-CoV-2 until April 19, 2020. At the time of surgery, hospitals were defined as having a COVID-19-free surgical pathway (complete segregation of the operating theater, critical care, and inpatient ward areas) or no defined pathway (incomplete or no segregation, areas shared with patients with COVID-19). The primary outcome was 30-day postoperative pulmonary complications (pneumonia, acute respiratory distress syndrome, unexpected ventilation). RESULTS: Of 9,171 patients from 447 hospitals in 55 countries, 2,481 were operated on in COVID-19-free surgical pathways. Patients who underwent surgery within COVID-19-free surgical pathways were younger with fewer comorbidities than those in hospitals with no defined pathway but with similar proportions of major surgery. After adjustment, pulmonary complication rates were lower with COVID-19-free surgical pathways (2.2% v 4.9%; adjusted odds ratio [aOR], 0.62; 95% CI, 0.44 to 0.86). This was consistent in sensitivity analyses for low-risk patients (American Society of Anesthesiologists grade 1/2), propensity score-matched models, and patients with negative SARS-CoV-2 preoperative tests. The postoperative SARS-CoV-2 infection rate was also lower in COVID-19-free surgical pathways (2.1% v 3.6%; aOR, 0.53; 95% CI, 0.36 to 0.76). CONCLUSION: Within available resources, dedicated COVID-19-free surgical pathways should be established to provide safe elective cancer surgery during current and before future SARS-CoV-2 outbreaks
Elective cancer surgery in COVID-19-free surgical pathways during the SARS-CoV-2 pandemic: An international, multicenter, comparative cohort study
PURPOSE As cancer surgery restarts after the first COVID-19 wave, health care providers urgently require data to determine where elective surgery is best performed. This study aimed to determine whether COVID-19–free surgical pathways were associated with lower postoperative pulmonary complication rates compared with hospitals with no defined pathway. PATIENTS AND METHODS This international, multicenter cohort study included patients who underwent elective surgery for 10 solid cancer types without preoperative suspicion of SARS-CoV-2. Participating hospitals included patients from local emergence of SARS-CoV-2 until April 19, 2020. At the time of surgery, hospitals were defined as having a COVID-19–free surgical pathway (complete segregation of the operating theater, critical care, and inpatient ward areas) or no defined pathway (incomplete or no segregation, areas shared with patients with COVID-19). The primary outcome was 30-day postoperative pulmonary complications (pneumonia, acute respiratory distress syndrome, unexpected ventilation). RESULTS Of 9,171 patients from 447 hospitals in 55 countries, 2,481 were operated on in COVID-19–free surgical pathways. Patients who underwent surgery within COVID-19–free surgical pathways were younger with fewer comorbidities than those in hospitals with no defined pathway but with similar proportions of major surgery. After adjustment, pulmonary complication rates were lower with COVID-19–free surgical pathways (2.2% v 4.9%; adjusted odds ratio [aOR], 0.62; 95% CI, 0.44 to 0.86). This was consistent in sensitivity analyses for low-risk patients (American Society of Anesthesiologists grade 1/2), propensity score–matched models, and patients with negative SARS-CoV-2 preoperative tests. The postoperative SARS-CoV-2 infection rate was also lower in COVID-19–free surgical pathways (2.1% v 3.6%; aOR, 0.53; 95% CI, 0.36 to 0.76). CONCLUSION Within available resources, dedicated COVID-19–free surgical pathways should be established to provide safe elective cancer surgery during current and before future SARS-CoV-2 outbreaks
Monitoring of emerging contaminants (pharmaceuticals, Personal Care Products, surfactants and heavy metals) in a quaternary detritic aquifer
International audienceThe presence of 209 emerging compounds, surfactants, priority substances according to the 2008/105/EC Directive, 10 heavy metals and microbiological organisms in blended water and aquifer samples was investigated in a quaternary aquifer. The effects of these compounds over the environment are not clear in many cases, but many of them have been classified as endocrine disruptor compounds, EDC. Their presence in the media is controlled in one hand by their transformation and/or removal rates and, on the other hand, by their continuous release into the media, due to the broad use of these in many human activities (pharmaceuticals, personal care products, pesticides, heavy metals, LAS and others). The attention of this work focusses on the presence and fate of these substances in the vadose zone and the aquifer. The aquifer catchment (81km2) located in SE Spain presents a high natural salinity (with EC values of 7,500 S cm-1, and high concentrations of chloride, sulphate and sodium), making it unsuitable to be used as drinking water or irrigation. Two sampling campaigns (February and June 2011) in wells and springs have been carried out top characterize physic-chemical, microbiological and emerging contaminants presence in the aquifer. A total of 209 emerging pollutants grouped into the following classes were analysed: 125 pharmaceutical compounds (Phs), 20 polyaromatic hydrocarbons (PAHs) and Dioxins, 46 pesticides, 3 volatile priority pollutants as well as the most commonly used anionic surfactants were identified for further analysis. Heavy metals included: Cu, Cd, Pb, Hg, Ni, Zn, Sn, Pt, Pd and Tl. Results showed that 39 out of all compounds were detected: 11 pharmaceuticals, 9 PAHs, 19 pesticides, 4 surfactants and 4 heavy metals. Two of the compounds, endosulfan- and Ni, were detected in concentrations above the allowed regulation. Although results are limited to 2 sampling campaigns, it is important to note that surfactants (LAS), pesticides PAHs and Dioxins were detected in most of the water samples, this indicates the presence of wastewater effluents of urban origin and agricultural impacts. The ubiquitous presence of LAS is related to the low-sorption capacity and its wide variety of applications, ranging from cleaning products to pesticide formulation (among others)
Vadose-zone monitoring strategy to evaluate desalted groundwater effects on hydraulic properties
International audienceDesalinated brackish groundwater is becoming a new source of water supply to comply with growing water demands, especially in (semi) arid countries. Irrigation with desalinated or a blend of desalinated and ground/surface water, presents associated impacts on plants, soil and aquifer media. Mixed waters with different salinities can lead to the formation of unexpected chemical precipitates. The use of desalted groundwater for irrigation counts with potential drawbacks, among them: changes of hydraulic properties of soil-aquifer systems (e.g. hydraulic conductivity, porosity) as a consequence of mineral precipitation; root growth blockage and plant uptake of pollutants; as well as leaching of contaminants to groundwater. An experimental plot located at SE Spain, covered by grass and irrigated by sprinklers with a blend of desalted and groundwater from a brackish aquifer, has been monitored in order to characterize at field scale the possible impacts on soil hydraulic properties. The monitoring strategy to control water and heat flux includes traditional and more updated devices. The field instrumentation, vertically installed from the ground surface and spatially distributed, consisted of: ten tensiometers (Soilmoisture Equipment Corp, Goleta, CA, USA) at different depths (two per depth); and, two access tubes (fiber glass, 44mm diameter 2m length) for soil moisture measurements from TRIME-FM TDR probe (Imko GmbH, Ettlingen, Germany). Automatic logging is carried out from a trench located in the border of the experimental plot and it takes in: a set of five 5TE devices (Decagon Devices Inc, Pullman, WA, USA) vertically installed, which measure volumetric water content, electric conductivity and temperature; and additionally, a suction sensor at 0.6m depth. Finally, a periodic sampling of undisturbed soil cores (2m length) takes place for the purpose of imaging porosity changes from environmental scanning electron microscope (ESEM). First results about water and heat flux, as well as changes in the soil hydraulic properties, are presented in the current work
Environmental Scanning Electron Microscopy Application for Brackish Water Irrigation Impact on Soil
We investigated soil response to irrigation with slightly brackish water (1200 mg L total dissolved solids on average) in a semiarid environment at the microscopic scale using environmental scanning electron microscopy (ESEM) applied in static and dynamic modes, which allowed comparison between nonirrigated and 3-yr-irrigated soil samples to determine the impact of applied brackish water. Results indicate that (i) there was a change in soil hydrophilic behavior by the continuous accumulation of water-borne salt in the soil matrix, (ii) compared with nonirrigated samples, the wetting process occurred more gradually for the 3-yr-irrigated sample, (iii) the wetting process started at a lower vapor pressure for the 3-yr-irrigated sample, (iv) water vapor pressure in the chamber at full saturation was lower for the 3-yr-irrigated sample, and (v) the presence of heavy metals in the soil was more frequent in irrigated samples. Our results show that ESEM is a useful technique to determine the impacts on soil of irrigation with slightly brackish water
ValInSAR: A Systematic Approach for the Validation of Differential SAR Interferometry in Land Subsidence Areas
Land subsidence is a natural or anthropogenic process triggering the settlement of the Earth's surface. When this phenomenon is induced by groundwater withdrawal, compaction of unconsolidated sediments causes land displacement. Differential interferometric synthetic aperture radar (DInSAR) is widely used nowadays to monitor subsidence over extensive areas. However, validation of DInSAR measurements with in-situ techniques is lacking in many case studies, reducing the reliability of further analyses. The aim of this article is to propose a systematic methodology to validate DInSAR measurements with in-situ techniques to obtain reliable subsidence measurements. The article provides a literature review of the most common approaches to validate DInSAR measurements and a description of the proposed systematic methodology, which is supported by a MATLAB open-source code. The methodology allows the analysis of both DInSAR-based velocity and displacement time series. We propose a set of statistics to assess the accuracy of the DInSAR estimates. For this purpose, RMSE parameters have been normalized with the range and the average of the in-situ deformation values. Moreover, combining these normalized parameters with the Pearson correlation coefficient (R2), a classification scheme is recommended for accepting/rejecting the DInSAR data for further analyses. This methodology has been applied in three study areas characterized by very well-documented subsidence processes: The Alto Guadalentín Valley and Murcia City in Spain, and San Luis Potosí in Mexico