LAMPF 805-MHz accelerator structure tuning and its relation to fabrication and installation

In the course of construction of the 805-MHz linac, it was necessary to set 10,000 resonant cavities to precise frequencies and to check, and in some cases, to adjust the field distribution along the beam axis of the 104 rf tanks composing the linac. Since this was the first proton linac of the side-coupled type ever built, it was necessary to develop new techniques and instrumentation for structure tuning. An outline of the fabrication and installation process is given, showing how the tuning operations were interwoven with the fabrication steps and indicating the relation of tuning to other installation and check-out activities. The steps of the tuning procedure are then examined in detail. Tools for tuning by dinging, nose-stretching, and septum bending are described. Techniques for frequency measurements and for beadpull measurements of field distribution are discussed. The section on field distribution measurement includes results of research on measurement procedure and theory and observations confirming the low-power stability of field distributions for a three-year period. Selected results from the theory of chains of coupled resonators are given. Coupled resonator model parameters and various measured parameters for the 805-MHz linac are tabulated

A Measurement of the Branching Fraction for the Inclusive B --> X(s) gamma Decays with the Belle Detector

We have measured the branching fraction of the inclusive radiative B meson decay B --> X(s) gamma to be Br(B->X(s)gamma)=(3.36 +/- 0.53(stat) +/- 0.42(sys) +0.50-0.54(th)) x 10^{-4}. The result is based on a sample of 6.07 x 10^6 BBbar events collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric e^+e^- storage ring.Comment: 14 pages, 6 Postsript figures, uses elsart.cl

Determination of |Vcb| using the semileptonic decay \bar{B}^0 --> D^{*+}e^-\bar{\nu}

We present a measurement of the Cabibbo-Kobayashi-Maskawa (CKM) matrix element |Vcb| using a 10.2 fb^{-1} data sample recorded at the \Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric e^+e^- storage ring. By extrapolating the differential decay width of the \bar{B}^0 --> D^{*+}e^-\bar{\nu} decay to the kinematic limit at which the D^{*+} is at rest with respect to the \bar{B}^0, we extract the product of |Vcb| with the normalization of the decay form factor F(1), |Vcb |F(1)= (3.54+/-0.19+/-0.18)x10^{-2}, where the first error is statistical and the second is systematic. A value of |Vcb| = (3.88+/-0.21+/-0.20+/-0.19)x10^{-2} is obtained using a theoretical calculation of F(1), where the third error is due to the theoretical uncertainty in the value of F(1). The branching fraction B(\bar{B}^0 --> D^{*+}e^-\bar{\nu}) is measured to be (4.59+/-0.23+/-0.40)x10^{-2}.Comment: 20 pages, 6 figures, elsart.cls, submitted to PL

Atmospheric effects on extensive air showers observed with the Surface Detector of the Pierre Auger Observatory

Atmospheric parameters, such as pressure (P), temperature (T) and density, affect the development of extensive air showers initiated by energetic cosmic rays. We have studied the impact of atmospheric variations on extensive air showers by means of the surface detector of the Pierre Auger Observatory. The rate of events shows a ~10% seasonal modulation and ~2% diurnal one. We find that the observed behaviour is explained by a model including the effects associated with the variations of pressure and density. The former affects the longitudinal development of air showers while the latter influences the Moliere radius and hence the lateral distribution of the shower particles. The model is validated with full simulations of extensive air showers using atmospheric profiles measured at the site of the Pierre Auger Observatory.Comment: 24 pages, 9 figures, accepted for publication in Astroparticle Physic

Update on the correlation of the highest energy cosmic rays with nearby extragalactic matter

Data collected by the Pierre Auger Observatory through 31 August 2007 showed evidence for anisotropy in the arrival directions of cosmic rays above the Greisen-Zatsepin-Kuz'min energy threshold, \nobreak{$6\times 10^{19}$eV}. The anisotropy was measured by the fraction of arrival directions that are less than $3.1^\circ$ from the position of an active galactic nucleus within 75 Mpc (using the V\'eron-Cetty and V\'eron $12^{\rm th}$ catalog). An updated measurement of this fraction is reported here using the arrival directions of cosmic rays recorded above the same energy threshold through 31 December 2009. The number of arrival directions has increased from 27 to 69, allowing a more precise measurement. The correlating fraction is $(38^{+7}_{-6})$, compared with $21$ expected for isotropic cosmic rays. This is down from the early estimate of $(69^{+11}_{-13})$. The enlarged set of arrival directions is examined also in relation to other populations of nearby extragalactic objects: galaxies in the 2 Microns All Sky Survey and active galactic nuclei detected in hard X-rays by the Swift Burst Alert Telescope. A celestial region around the position of the radiogalaxy Cen A has the largest excess of arrival directions relative to isotropic expectations. The 2-point autocorrelation function is shown for the enlarged set of arrival directions and compared to the isotropic expectation.Comment: Accepted for publication in Astroparticle Physics on 31 August 201

Measurement of the inclusive semileptonic branching fraction of B mesons and |Vcb|

We present a measurement of the electron spectrum from inclusive semileptonic {\it B} decay, using 5.1 fb$^{-1}$ of $\Upsilon(4S)$ data collected with the Belle detector. A high-momentum lepton tag was used to separate the semileptonic {\it B} decay electrons from secondary decay electrons. We obtained the branching fraction, ${\cal B}(B\to X e^+ \nu) = (10.90 \pm 0.12 \pm 0.49)$, with minimal model dependence. From this measurement, we derive a value for the Cabibbo-Kobayashi-Maskawa matrix element $|V_{cb}| = 0.0408 \pm 0.0010 {\rm (exp)} \pm 0.0025{\rm (th)}$.Comment: 16 pages, 3 figures, 3 table

The Fluorescence Detector of the Pierre Auger Observatory

The Pierre Auger Observatory is a hybrid detector for ultra-high energy cosmic rays. It combines a surface array to measure secondary particles at ground level together with a fluorescence detector to measure the development of air showers in the atmosphere above the array. The fluorescence detector comprises 24 large telescopes specialized for measuring the nitrogen fluorescence caused by charged particles of cosmic ray air showers. In this paper we describe the components of the fluorescence detector including its optical system, the design of the camera, the electronics, and the systems for relative and absolute calibration. We also discuss the operation and the monitoring of the detector. Finally, we evaluate the detector performance and precision of shower reconstructions.Comment: 53 pages. Submitted to Nuclear Instruments and Methods in Physics Research Section

Search for First Harmonic Modulation in the Right Ascension Distribution of Cosmic Rays Detected at the Pierre Auger Observatory

We present the results of searches for dipolar-type anisotropies in different energy ranges above $2.5\times 10^{17}$ eV with the surface detector array of the Pierre Auger Observatory, reporting on both the phase and the amplitude measurements of the first harmonic modulation in the right-ascension distribution. Upper limits on the amplitudes are obtained, which provide the most stringent bounds at present, being below 2% at 99% $C.L.$ for EeV energies. We also compare our results to those of previous experiments as well as with some theoretical expectations.Comment: 28 pages, 11 figure

Techniques for measuring aerosol attenuation using the Central Laser Facility at the Pierre Auger Observatory

The Pierre Auger Observatory in Malargüe, Argentina, is designed to study the properties of ultra-high energy cosmic rays with energies above 10(18) eV. It is a hybrid facility that employs a Fluorescence Detector to perform nearly calorimetric measurements of Extensive Air Shower energies. To obtain reliable calorimetric information from the FD, the atmospheric conditions at the observatory need to be continuously monitored during data acquisition. In particular, light attenuation due to aerosols is an important atmospheric correction. The aerosol concentration is highly variable, so that the aerosol attenuation needs to be evaluated hourly. We use light from the Central Laser Facility, located near the center of the observatory site, having an optical signature comparable to that of the highest energy showers detected by the FD. This paper presents two procedures developed to retrieve the aerosol attenuation of fluorescence light from CLF laser shots. Cross checks between the two methods demonstrate that results from both analyses are compatible, and that the uncertainties are well understood. The measurements of the aerosol attenuation provided by the two procedures are currently used at the Pierre Auger Observatory to reconstruct air shower data