Data presentation techniques for rotating machinery malfunction diagnosis

Baseline steady state data is excellent for documentation of vibration signals at normal operating conditions. Assuming that a set of initial data was acquired with the machinery in a good state of repair, any future changes or deterioration in mechanical condition can be easily compared to the baseline information. Often this type of comparison will yield sufficient information for evaluation of the problem. However, many malfunctions require the analysis of transient data in order to identify the malfunction. Steady-state data formats consist of: Time Base Waveform, Orbit, Spectrum. Transient data formats consist of: Polar, Bode, Cascade. Our objective is to demonstrate the use of the above formats to diagnose a machine malfunction. A turbine-driven compressor train is chosen as an example. The machine train outline drawing is shown

Analysis of the (μ/μI,λ)(\mu/\mu_I,\lambda)-CSA-ES with Repair by Projection Applied to a Conically Constrained Problem

Theoretical analyses of evolution strategies are indispensable for gaining a deep understanding of their inner workings. For constrained problems, rather simple problems are of interest in the current research. This work presents a theoretical analysis of a multi-recombinative evolution strategy with cumulative step size adaptation applied to a conically constrained linear optimization problem. The state of the strategy is modeled by random variables and a stochastic iterative mapping is introduced. For the analytical treatment, fluctuations are neglected and the mean value iterative system is considered. Non-linear difference equations are derived based on one-generation progress rates. Based on that, expressions for the steady state of the mean value iterative system are derived. By comparison with real algorithm runs, it is shown that for the considered assumptions, the theoretical derivations are able to predict the dynamics and the steady state values of the real runs.Comment: This is a PREPRINT of an article that has been accepted for publication in the journal MIT Press Evolutionary Computation (ECJ). 25 pages + supplementary material. The work was supported by the Austrian Science Fund FWF under grant P29651-N3

The solubility of rhenium in silicate melts: Implications for the geochemical properties of rhenium at high temperatures

The solubility of rhenium (Re) in a haplobasaltic melt (anorthite-diopside eutectic composition) has been experimentally determined using the mechanically assisted equilibration technique at 1400°C as a function of oxygen fugacity (10−12 < fO2 ≤ 10−7 bar), imposed by CO-CO2 gas mixtures. Samples were analysed by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). This is a true microanalytical technique, which allows small-scale sample heterogeneity to be detected, while providing a limit of detection of 2 ppb Re. Time-resolved LA-ICP-MS spectra revealed the presence of suboptically sized micronuggets of Re in all samples, which, because they are present at the 0.5 to 10 ppm level, dominate the true solubilities of Re (<1 ppm at the conditions of the experiment) in bulk analyses of the samples. Nevertheless, the micronuggets could be filtered out from the time-resolved spectra to reveal accurate values of the true Re solubility. A number of time series of samples were taken at constant fO2 to demonstrate that the solubilities converge to a constant value. In addition, solubilities were measured after increasing and decreasing the imposed fO2. The results show that Re dissolves in the silicate melt as ReO2 (Re4+) and ReO3 (Re6+) species, with the latter predominating at typical terrestrial upper-mantle oxygen fugacities. The total solubility of Re is described by the following expression (fO2 in bars): [Re/ppb] = 9.7(±1.9) × 109 (fO2) + 4.2 (±0.3) × 1014 (fO2)1.5Assuming an activity coefficient for Re in Fe-rich metal of 1, this gives a value of DRemet/sil of 5 × 1010 at log fO2 = IW-2, appropriate for metal-silicate partitioning in an homogenously accreting Earth. Thus, Re is indeed very highly siderophile, and the mantle’s abundance cannot be explained by homogenous accretion

The solubility and oxidation state of nickel in silicate melt at low oxygen fugacities: Results using a mechanically assisted equilibration technique

The solubility of Ni in a silicate melt has been measured using a new, mechanically assisted equilibration technique over a wide range of controlled ƒO2 values. The melt composition corresponds to the 1 atm eutectic in the system CaAl2Si2O8-CaMgSi2O6 + 10 wt% CaO. The experiments were performed at 1300°C and over an ƒO2 range of 10−8.5 to 10−13.75, and over a temperature range of 1270 to 1390°C at a constant gas mixing ratio ( ). The experiment consists of a sample of melt contained within a crucible of Ni metal and held in a 1 atm gas mixing furnace. A Ni spindle is entered into the sample from above and continuously rotated at a constant angular velocity using a viscometer head. The stirring of the sample serves to accelerate the approach to equilibrium between the liquid sample and the metal crucible (and spindle). This arrangement allows relatively rapid equilibration of Ni content following changes to higher or lower ƒO2 values. Samples of the melt may be taken at any time for analysis and thus the equilibrium solubility of Ni in the silicate melt may be determined from unambiguous experimental reversals. The Ni contents of samples, analysed both by INAA and by ICP-AES, range from 25 to 5300 ppm. The data presented in this paper indicate that the oxidation state of Ni in the investigated melt is Ni2+ over the entire range of ƒO2 investigated. This conclusion contrasts with recent reports in the literature of an inflection in the ƒO2 dependence of Ni solubility, which has been interpreted as solution of neutral Ni at low ƒO2 (Morse et al., 1991; Colson, 1992; Ehlers et al., 1992). We also present data for the temperature dependence of Ni solubility in the investigated melt. The solubility decreases with increasing temperature at constant ƒO2. The present results are in good agreement with the metal-loop-equilibration experiments reported by Holzheid et al. (1994)

Combined Diagnostic Modalities Improve Detection of Detrusor External Sphincter Dyssynergia

Introduction. The diagnosis of detrusor-external sphincter dyssynergia (DESD) is a clinically relevant finding during urodynamic testing. However, there is no consensus regarding diagnostic specifics of electromyography (EMG) or voiding cystourethrography (VCUG). We evaluated the concordance of the two modalities most commonly used in clinical practice for the diagnosis of DESD. Methods. Patients were prospectively evaluated by a single urodynamicist at an academic center and retrospectively re-evaluated by an independent urodynamicist for agreement. DESD was determined by increased patch EMG activity or a dilated bladder neck/proximal urethra on VCUG during detrusor contraction. Minimal acceptable criterion for agreement was set at 70%. Results. Forty-six patients were diagnosed with DESD with both modalities available. Of these 46 patients, 25 were diagnosed by both tests, 11 by VCUG alone and 10 by patch EMG alone. Binomial testing demonstrated the proportion of agreement was 54% (95% CI 39% to 68%). Conclusion. We found significant disagreement between the two modalities, similar to previously reported findings using needle EMG, and we expand the applicability of our data to the majority of clinicians who use patch EMG electrodes. This further supports the idea that the combined use of EMG and VCUG for diagnosis can identify more cases of DESD than either modality alone

Dihedral-Angle-Controlled Crossover from Static Hole Delocalization to Dynamic Hopping in Biaryl Cation Radicals

In cases of coherent charge-transfer mechanism in biaryl compounds the rates follow a squared cosine trend with varying dihedral angle. Herein we demonstrate using a series of biaryl cation radicals with varying dihedral angles that the hole stabilization shows two different regimes where the mechanism of the hole stabilization switches over from (static) delocalization over both aryl rings to (dynamic) hopping. The experimental data and DFT calculations of biaryls with different dihedral angles unequivocally support that a crossover from delocalization to hopping occurs at a unique dihedral angle where the electronic coupling (Hab) is one half of reorganization (λ), that is, Hab=λ/2. The implication of this finding in non-coherent charge-transfer rates is being investigated

« Splendeurs et misères » de la provocation : une esthétique de la limite respectée ?

Cet article s’attachera à analyser les différences entre la provocation et la subversion. Si ces deux termes sont souvent utilisés comme des synonymes, ils incarnent en réalité « deux mondes de valeur » (Heinich, 2004, 166). Alors que le préfixe sub révèle une action qui avance masquée, pro indique une volonté d’exhibitionnisme et une dynamique de la surenchère. Ainsi, la subversion n’est pas nécessairement provocante et la provocation pas nécessairement subversive. Nous observerons ces deux logiques à travers l’étude d’artistes contemporaines : Cindy Sherman et Wangechi Mutu. Les photographies de Cindy Sherman empruntent la stratégie du marketing, créent un choc visuel qui s’évanouit très rapidement. La provocation se renverse alors en nouvelle norme. Les collages de Wangechi Mutu comportent à l’inverse différentes de strates de signification qui interpellent, troublent, rendent le regard actif et créateur. N’y aurait-il pas une érotique subversive de la provocation qui mettrait à mal nos habitudes de pensée et de regard sans jamais violer l’ultime limite ?This article is going to analyze the differences between provocation and subversion. If these two words are often used as synonyms, they describe in reality “two worlds of value”. Whereas the prefix “sub” reveals an action that moves forward under concealment, “pro” indicates a wish for exhibitionism and a dynamics of overstatement. Therefore, subversion is not necessarily provocative and provocation not necessarily subversive. We will examine these two logics through the study of contemporary artists: Cindy Sherman and Wangechi Mutu. Cindy Sherman’s photographs adopt the strategy of marketing, creating a visual shock that quickly fades, while Wangechi Mutu’s collages suggest different levels of meaning to that question, disturb, make the gaze active and creative. Isn’t there a subversive eroticism of provocation that would change our ways of thinking without ever violating the ultimate limit

Preliminary examination of the Yamato-86032 lunar meteorite: II. Major and trace element chemistry

The chemical composition of the new lunar meteorite Yamato-86032 has been studied by several laboratories in a consortium study. A preliminary report on the first analytical results from seven laboratories is given in this paper. The meteorite, which is the largest lunar meteorite recovered so far, is more heavily shocked than the other five lunar meteorites, which makes it difficult to classify the rock exactly. Although it may be classified as an anorthositic breccia the trace element composition of Y-86032 is somewhat different from the composition of the other known lunar meteorites. The major element chemistry of Y-86032 is similar to the other lunar meteorites, except for the iron content, which is lower by a factor of about 1. 4. Since the magnesium abundance is nearly identical there is a disparity in the mg ratio. The REE abundances in Y-86032 are very low and comparable to Y-82192/3. There is no evidence of any KREEP component. The abundances of several lithophile and incompatible elements are lower in Y-86032 than in the other lunar meteorites. The siderophile element contents are low and vary between individual chips. Sc, Cr, Mn, and Co have significantly lower abundances than in Y-82192/3. The chemical investigations demonstrate that Y-86032 is a new and important sample from the lunar highlands

Model-independent extraction of ∣Vtq∣|V_{tq}| matrix elements from top-quark measurements at hadron colliders

Current methods to extract the quark-mixing matrix element $|V_{tb}|$ from single-top production measurements assume that $|V_{tb}|\gg |V_{td}|, |V_{ts}|$: top quarks decay into $b$ quarks with 100% branching fraction, s-channel single-top production is always accompanied by a $b$ quark and initial-state contributions from $d$ and $s$ quarks in the $t$-channel production of single top quarks are neglected. Triggered by a recent measurement of the ratio $R=\frac{|V_{tb}|^{2}}{|V_{td}|^{2}+|V_{ts}|^{2}+|V_{tb}|^{2}}=0.90 \pm 0.04$ performed by the D0 collaboration, we consider a $|V_{tb}|$ extraction method that takes into account non zero d- and s-quark contributions both in production and decay. We propose a strategy that allows to extract consistently and in a model-independent way the quark mixing matrix elements $|V_{td}|$, $|V_{ts}|$, and $|V_{tb}|$ from the measurement of $R$ and from single-top measured event yields. As an illustration, we apply our method to the Tevatron data using a CDF analysis of the measured single-top event yield with two jets in the final state one of which is identified as a $b$-quark jet. We constrain the $|V_{tq}|$ matrix elements within a four-generation scenario by combining the results with those obtained from direct measurements in flavor physics and determine the preferred range for the top-quark decay width within different scenarios.Comment: 36 pages, 17 figure