HUBUNGAN ANTARA POLA ASUH DENGAN STATUS GIZI PADA ANAK USIA 24-59 BULAN DI KECAMATAN TOULUAAN KABUPATEN MINAHASA TENGGARA

Status gizi masyarakat termasuk balita ditentukan oleh asupan gizi yang baik. Kebutuhan tubuh akan makanan dan pengaruh interaksi dari penyakit. Ketidaseimbangan asupan gizi bisa mengakibatkan gizi kurang maupun gizi lebih. Ada faktor utama penyebab kekurangan gizi yaitu kemiskinan. Konsumsi makanan yang beragam, bergizi dan seimbang dan aman dapat memenuhi kecukupan gizi anak untuk pertumbuhan dan perkembangannya. Tujuan penelitian ini yaitu untuk mengetahui apakah terdapat hubungan antara pola asuh dengan status gizi pada anak usia 24-59 bulan di Kecamatan Touluaan Kabupaten Minahasa Tenggara. Desain penelitian yang digunakan yaitu observasional analitik dengan rancangan penelitian cross sectional. Populasi dalam penelitian ini adalah anak usia 24-59 bulan Kecamatan Touluaan dengan jumlah 100 balita yang memenuhi kriteria inklusi dan eksklusi. Sampel penelitian ini diambil secara purposive sampling. Berdasarkan uji statistik Fisher’s Exact Test diperoleh hasil bahwa tidak terdapat hubungan antara praktik merawat dengan status gizi berdasarkan indeks BB/U, dengan nilai p= 1,000, TB/U dengan nilai p=1,000 dan BB/TB dengan nilai p=1,000. Tidak terdapat hubungan antara praktik pemberian makan dengan status gizi berdasarkan indeks BB/U dengan nilai p= 1,000 dan BB/TB dengan nilai p= 0,140. Terdapat hubungan antara praktik pemberian makan anak dengan status gizi berdasarkan indeks TB/U dengan nilai p= 0,045. Terdapat hubungan antara pola asuh dalam hal ini praktik pemberian makan anak dengan status gizi (TB/U) pada anak usia 24-59 bulan di Kecamatan Touluaan Kabupaten Minahasa Tenggara.Kata Kunci: Pola Asuh, Status GiziABSTRACTThe community nutritional status include the toddler determined of a good nutrition. The body debriefing and the influence of disease interactions. Disproportion of nutritional can be intaken malnutrition and over nutrition. The main factor causing malnutrition is poverty. The balanced of Diverse nutritious and good consumption can meet children's nutritional adequacy for growth evolution. The purpose of this study is to determine whether there is a relationship between parenting with nutritional status in children aged 24-59 months in Touluaan District, Southeast of Minahasa. The research design used was analytic observational with cross sectional research design. The population in this study were children aged 24-59 months in Touluaan Subdistrict with a total of 100 toddlers who met the inclusion and exclusion criteria. The research sample was taken by purposive sampling. Based on the “Fisher's Exact test” statistical results obtained that there was no relationship between the practice of caring for nutritional status based on BB / U index, with a value of p = 1,000, TB / U with a value of p = 1,000 and BB / TB with a value of p = 1,000 . There was no correlation between feeding practices and nutritional status based on BB / U index with p = 1,000 and BB / TB values with p = 0.140. There is a relationship between the practice of feeding children with nutritional status based on TB / U index with a value of p = 0.045. There is some relationship amongst parenting, in this case the practice of feeding children with nutritional status of children (TB / U) in Touluaan District, Southeast of Minahasa.Keywords: breastfeeding patients, nutritional statu

Data acquisition software for the CMS strip tracker

The CMS silicon strip tracker, providing a sensitive area of approximately 200 m2 and comprising 10 million readout channels, has recently been completed at the tracker integration facility at CERN. The strip tracker community is currently working to develop and integrate the online and offline software frameworks, known as XDAQ and CMSSW respectively, for the purposes of data acquisition and detector commissioning and monitoring. Recent developments have seen the integration of many new services and tools within the online data acquisition system, such as event building, online distributed analysis, an online monitoring framework, and data storage management. We review the various software components that comprise the strip tracker data acquisition system, the software architectures used for stand-alone and global data-taking modes. Our experiences in commissioning and operating one of the largest ever silicon micro-strip tracking systems are also reviewed

A study of charge collection processes on polycrystalline diamond detectors

Abstract We performed a study of charge collection distance (CCD) on medium to high-quality prototypes of diamond sensors prepared by Chemical Vapor Deposition (CVD). We studied the Charge Collection Efficiency in these materials supposing that it is limited by the presence of a recombination level and a distribution of trap levels centered at 1.7 eV from the band-edge. We also supposed that the exposition to ionizing radiation can make the trap levels ineffective (pumping effect). We have shown that these assumptions are valid by correlating the CCD to the pumping efficiency. Moreover, we have shown that the pumping efficiency is bias-dependent. We have explained our experimental results assuming that trapped carriers generate an electric field inside the diamond bulk

Monitoring the CMS strip tracker readout system

The CMS Silicon Strip Tracker at the LHC comprises a sensitive area of approximately 200 m2 and 10 million readout channels. Its data acquisition system is based around a custom analogue front-end chip. Both the control and the readout of the front-end electronics are performed by off-detector VME boards in the counting room, which digitise the raw event data and perform zero-suppression and formatting. The data acquisition system uses the CMS online software framework to configure, control and monitor the hardware components and steer the data acquisition. The first data analysis is performed online within the official CMS reconstruction framework, which provides many services, such as distributed analysis, access to geometry and conditions data, and a Data Quality Monitoring tool based on the online physics reconstruction. The data acquisition monitoring of the Strip Tracker uses both the data acquisition and the reconstruction software frameworks in order to provide real-time feedback to shifters on the operational state of the detector, archiving for later analysis and possibly trigger automatic recovery actions in case of errors. Here we review the proposed architecture of the monitoring system and we describe its software components, which are already in place, the various monitoring streams available, and our experiences of operating and monitoring a large-scale system

Karakterisasi Mekanik Biokomposit Klobot Jagung sebagai Bahan Dasar Plastik Biodegradable

The corn production in Indonesia, based on the data from Badan Pusat Statistik in 2012, amounted to 19.73 million tons, the cornhusk from the corn crop is about 38.38%. The utilization of cornhusk itself has not been maximized yet, so the research to maximize the utilization of cornhusk is required. The research has been made biocomposites cornhusk and Linear Low Density Polyethylene (LLDPE) with hot press method. Biocomposites made with the variation of cornhusk:LLDPE are 30:70, 40:60, 50:50, 60:40, 70:30, and it is characterized of the mechanical characteristics (tensile and tear) with Universal Testing Machine (UTM), biodegradation in a qualitative manner. Mechanical analysis showed the mechanical characteristics decrease with the addition of cornhusk concentration on biocomposites, and concentration 30:70 has the highest mechanical characteristics with tensile strength 24.77 MPa, elongation 19.10% and tear strength 53.94 N/mm. The result is contrast with the biodegradable analysis in which the bigger concentration cornhusk then the level of biodegradability is higher

Design, fabrication and characterization of the first AC-coupled silicon microstrip sensors in India

This paper reports the design, fabrication and characterization of single-sided silicon microstrip sensors with integrated biasing resistors and coupling capacitors, produced for the first time in India. We have first developed a prototype sensor on a four-inch wafer. After finding suitable test procedures for characterizing these AC coupled sensors, we have fine-tuned various process parameters in order to produce sensors with the desired specifications.Comment: 10 pages, 11 figures, 1 table, to appear in JINS

KARAKTERISTIK EDIBLE FILM DARI EKSTRAK KACANG KEDELAI DENGAN PENAMBAHAN TEPUNG TAPIOKA DAN GLISEROL SEBAGAI BAHAN PENGEMAS MAKANAN

ne way to solve the environment issue in the usage of nonbiodegradable plastic is by using biodegradable packaging. Edible film is a thin layer which is overlay the food. In this research, edible film made from mixture of soybean extract with starch and glycerol. The process of making edible films is began with producing soybean protein extract producing soy milk. Soy milk added by tapioca flour and glyserol variations : 2; 4; 6; 8 and 10 (ml/100 ml soy milk). Then, the mixture stirred by using magnetic stirer, formed and dried in the oven at the temperature of 40 °C ± 2 days. After that, the characteristics test of edible film done by checking the thickness, the tensile strength and elongation at break. The results of research shows that the addition of glycerol influence the edible film’s thickness, tensile strength and elongation at break. The thickness obtained from the increasing of the addition glycerol. They are 0,208 mm; 0,228 mm; 0,248 mm; 0,274 mm and 0,294 mm. The tensile strength will decrease if the thickness of the edible film increase. They are 0,105 MPa; 0,134 MPa; 0,088 MPa; 0,072 MPa and 0,048 MPa. The elongation at break which is obtained will increase by increasing of edible film’s thickness. They are 1,839%; 3,270%; 3,842%; 5,779%, and 6,158%. The characteristic’s test shows that the best thickness of edible film is 0,228 mm

Precise measurement of the W-boson mass with the CDF II detector

We have measured the W-boson mass MW using data corresponding to 2.2/fb of integrated luminosity collected in proton-antiproton collisions at 1.96 TeV with the CDF II detector at the Fermilab Tevatron collider. Samples consisting of 470126 W->enu candidates and 624708 W->munu candidates yield the measurement MW = 80387 +- 12 (stat) +- 15 (syst) = 80387 +- 19 MeV. This is the most precise measurement of the W-boson mass to date and significantly exceeds the precision of all previous measurements combined

Search for the standard model Higgs boson in the H to ZZ to 2l 2nu channel in pp collisions at sqrt(s) = 7 TeV

A search for the standard model Higgs boson in the H to ZZ to 2l 2nu decay channel, where l = e or mu, in pp collisions at a center-of-mass energy of 7 TeV is presented. The data were collected at the LHC, with the CMS detector, and correspond to an integrated luminosity of 4.6 inverse femtobarns. No significant excess is observed above the background expectation, and upper limits are set on the Higgs boson production cross section. The presence of the standard model Higgs boson with a mass in the 270-440 GeV range is excluded at 95% confidence level.Comment: Submitted to JHE