Proposal for a single-molecule field-effect transistor for phonons

We propose a practical realization of a field-effect transistor for phonons. Our device is based on a single ionic polymeric molecule and it gives modulations as large as -25% in the thermal conductance for feasible temperatures and electric field magnitudes. Such effect can be achieved by reversibly switching the acoustic torsion mode into an optical mode through the coupling of an applied electric field to the dipole moments of the monomers. This device can pave the way to the future development of phononics at the nanoscale or molecular scale

Síntese, caracterização e processamento por prensagem uniaxial a frio de ânodo NiO/ReYSZ utilizado em células combustíveis de óxido sólido

Há crescente interesse científico no desenvolvimento de novos materiais e novas tecnologias de fabricação de células a combustível. O objetivo deste trabalho é estudar e aplicar a metodologia de prensagem uniaxial a frio para deposição do ânodo nas células a combustível de óxido sólido. Zircônia dopada com 11% mol de óxido de ítrio obtido por óxidos mistos de terras raras, foi utilizado como material para o eletrólito e suporte do ânodo. Foram construídas células simétricas (ânodo/eletrólito/ânodo) variando a massa do suporte de ânodo para estudar o comportamento elétrico. Os componentes das amostras foram compactados juntos, seguido de sinterização. O material catalítico, óxido de níquel, foi depositado nas superfícies das amostras numa proporção de 1mmg para cada superfície. As amostras foram caracterizadas por difração de raios-x revelando presença da YSZ-11 e do óxido de níquel nas superfícies das amostras, por microscopia eletrônica de varredura comprovando a uniformidade da distribuição do óxido de níquel e por espectroscopia de impedância, sendo a menor resistência associada às amostras com menor quantidade em massa de suporte de ânodo.There is growing scientific interest in the development of new materials and new fuel cell manufacturing technologies. The objective of this work is to study and apply the cold uniaxial pressing methodology for anode deposition in solid oxide fuel cells. Zirconia doped with 11 mol% of yttrium oxide obtained by mixed rare earth oxides, was used as material for the electrolyte and anode support. Symmetric cells (anode/electrolyte/anode) were constructed by varying the mass of the anode support to study the electrical behavior. The components of the samples were compacted together, followed by sintering. The catalytic material, nickel oxide, was deposited on the surfaces of the samples at a ratio of 1mmg to each surface. The samples were characterized by X-ray diffraction revealing the presence of YSZ-11 and nickel oxide on the surfaces of the samples, by scanning electron microscopy proving the uniformity of the nickel oxide distribution and by impedance spectroscopy, with the lowest resistance associated to the samples with lower anode support mass

Carros de emergência: disponibilidade dos itens essenciais em um hospital de urgência norteriograndense

It is a descriptive, exploratory and quantitative study that evaluates, by the standards of the Brazilian Society of Cardiology (SBC), the availability of the items of the Level I Emergency Cars (EC) of the largest emergency hospital in Rio Grande do Norte. Data were collected during the month of November 2010, the sample consists of 12 EC. All EC analyzed showed gaps in availability of essential items, being the greatest deficiencies related to materials intended for vascular access, circulation control and drugs aimed at treating the causes of cardiac arrest. It was felt institution, as well as a protocol, difficult routine check of the EC, the nurse assigned task.Se trata de una investigación descriptiva, exploratoria y cuantitativa con el objetivo de evaluar, bajo los patrones de la Sociedad Brasileña de Cardiología (SBC), la disponibilidad de los artículos de nivel I de los Carros de Emergencia (CE) del mayor hospital de urgencia de Rio Grande do Norte. Los datos fueron colectados durante el mes de noviembre de 2010, estando compuesta la muestra por 12 CE. Todos los CE analizados presentaron fallos en la disponibilidad de artículos esenciales, estando las mayores deficiencias relacionadas con los materiales destinados al acceso vascular, control circulatorio y medicamentos dirigidos al tratamiento de las causas de PCR. Se percibe que la falta de recursos humanos y materiales en la institución, así como de un protocolo, dificulta la rutina de comprobación del CE, tarea atribuída al enfermero.Trata-se de uma pesquisa descritiva, exploratória e quantitativa com o objetivo de avaliar, sob os padrões da Sociedade Brasileira de Cardiologia (SBC), a disponibilidade dos itens de nível I dos Carros de Emergência (CE) do maior hospital de urgência do Rio Grande do Norte. Os dados foram coletados durante o mês de novembro de 2010, sendo a amostra composta por 12 CE. Todos os CE analisados apresentaram falhas na disponibilidade de itens essenciais, estando as maiores deficiências relacionadas aos materiais destinados ao acesso vascular, controle circulatório e medicamentos voltados ao tratamento das causas de PCR. Percebeu-se que a falta de recursos humanos e materiais na instituição, bem como de um protocolo, dificulta a rotina de checagem do CE, tarefa atribuída ao enfermeiro

Reef fish and benthic assemblages of the Trindade and Martin Vaz Island group, southwestern Atlantic

O conjunto insular de Trindade e Martin Vaz (CITMV) está localizado a aproximadamente 1.120 km da costa brasileira. Apesar de sua importância, salientada pela presença de diversas espécies endêmicas de peixes, não existem informações detalhadas sobre as assembléias de peixes e bentos do CITMV. É apresentada aqui a primeira caracterização quantitativa das assembléias de peixes e bentos do CITMV em um gradiente de profundidade entre 5 e 45 m. Informações qualitativas adicionais sobre assembléias recifais entre 45 e 100 m foram obtidas utilizando-se técnicas avançadas de mergulho (TRIMIX) e um veículo de operação remota (VOR). Assim como outras ilhas oceânicas brasileiras, a CITMV possui assembléias depauperadas de peixes e bentos, possivelmente devido ao seu isolamento e pequeno tamanho em comparação ao continente. A profundidade foi o fator que mais afetou a estrutura das assembléias de peixes, com a densidade da maioria das espécies declinando com o aumento da profundidade. Os recifes profundos (>; 45 m) foram caracterizados pela presença de bancos extensivos de rodolitos e recifes rochosos esparsamente cobertos por algas coralináceas incrustantes, corais negros (Cirripathes sp.) e alguns corais massivos e em de forma de placa. Peixes parcialmente ou obrigatoriamente planctívoros (e.g. Cephalopholis furcifer and Clepticus brasiliensis) também dominaram em recifes profundos. Características similares foram registradas para recifes mesofóticos ao longo do Atlântico Ocidental. Evidências de sobrepesca (obtidas aqui e em outros estudos recentes), a presença de quatro espécies de peixes endêmicas e com distribuição restrita, e o aumento no número de espécies novas ainda não descritas, indicam que a adoção de medidas de conservação baseadas no princípio da precaução é urgentemente necessária para garantir a manutenção dos ecossistemas frágeis e únicos do CITMV.The Trindade and Martin Vaz island group (TMVIG) is located at about 1,120 km off the Brazilian coast. Despite its importance, highlighted by the presence of several endemic fish species, the TMVIG lacks detailed information on the structure of fish and benthic assemblages. Presented here is the first quantitative assessment of reef fish and benthic assemblages of the TMVIG in a depth gradient ranging from 5 to 45 m. Additional qualitative information on reef assemblages between 45 and 100 m was obtained using advanced gas diving techniques (TRIMIX) and a remotely operated vehicle (ROV). Similarly to other Brazilian oceanic islands, the TMVIG possesses depauperated fish and benthic assemblages, possibly due to its isolation and small size in comparison to the mainland. Depth was the most important factor affecting the structure of fish assemblages, with the density of most fish species declining with depth. Deep reefs (>; 45 m) were characterized by the presence of extensive rhodolith beds and rocky reefs sparsely covered with crustose coralline algae, black coral (Cirripathes sp.) and a few massive or plate-like reef corals. Part-time or obligatory planktivorous fishes (e.g. Cephalopholis furcifer and Clepticus brasiliensis) also dominated deep reefs. Similar characteristics were recorded in mesophotic reef ecosystems across the Western Atlantic. Evidence of overfishing (obtained here and in other recent studies), the presence of four endemic and restricted range fish species, as well as the increase in number of new (and still undescribed) endemic taxa, indicates that the adoption of precautionary conservation measures are urgently needed in order to maintain the fragile and unique ecosystems of the TMVIG

Assessment of the risk of burnout and its associated factors in healthcare professionals during the COVID-19 pandemic: A prospective cohort study

IntroductionThe COVID-19 pandemic resulted in tremendous physical and psychological pressure on healthcare professionals, especially on those working in intensive care units (ICUs) and Emergency Departments (EDs). The present study intended to characterize the profile of these professionals which is associated with burnout and determine the potential predictors of such condition.MethodsA Prospective cohort study was carried out in a tertiary hospital between March 2020 and March 2021, in Salvador, Brazil. A standardized and validated version of the Oldenburg Burnout inventory (OLBI) was applied to assess risk of burnout together with data forms designed to collect information on sociodemographic characteristics and religious beliefs. ICU and ED healthcare professionals were evaluated during off-hours at two distinct periods of the COVID-19 pandemic, in 2020 and in 2021. Differences in the results obtained from each study participant between the timepoints were compared. A binary logistic regression analysis was performed to identify the predictors of burnout development independent of other confounding factors.ResultsSeventy-seven healthcare professionals with a median age of 33 (interquartile range [IQR]: 31–37.5) years and predominantly female (72.7%; n = 56) were enrolled. There were 62 professionals at risk of developing burnout through the OLBI. Those had a median age of 33 (IQR: 31–37) and female predominance (71%, n = 44). Disengagement and burnout were the only features which frequencies significantly changed over time, with increasing detection at the latest timepoint. Alcohol consumption was found to be an important risk factor for burnout development [adjusted odds ratio (aOR): 10.8 (95% CI: 1.8–64.2)]. Importantly, working in the ICU [aOR: 0.04 (95%CI: 0.01–0.32)] and the habit of praying daily [aOR: 0.07 (95%CI: 0.01–0.41)] were characteristics linked to reduced odds of burnout.DiscussionDisengagement substantially increased during the COVID-19 pandemic in healthcare professionals. Alcohol consumption favors the onset of burnout whereas habit of praying daily and working in the ICU are protective against such outcome. Institutional policies aimed at minimizing etilism may positively impact mental health of these professionals

Effect of microwave sintering on microstructure and mechanical properties in Y-TZP materials used for dental applications

The aim of this work is to study the application of microwave sintering to consolidate yttria-stabilized zirconia polycrystalline (Y-TZP) ceramics commonly applied in dentistry, so as to obtain highly dense materials and fine microstructure with shorter sintering cycles. Three Y-TZP materials are considered: two commercially available for dental applications and one laboratory studied powder. Microwave sintering was carried out at 1200 and 1300 degrees C for 10 min and conventional sintering at 1300 and 1400 degrees C for 2 h. Relative density, Vickers hardness and fracture toughness values for sintered samples were determined. Microwave sintering results, generally, in improved mechanical properties of the materials in terms of hardness and fracture toughness compared to conventional sintering and, in some cases, at lower sintering temperatures. A finer grain microstructure (final grain size < 250 min) was obtained with microwave sintering for both commercial materials. Fracture toughness values differ significantly between sintering techniques and chosen parameters. These results suggest that microwave heating can be employed to sinter Y-TZP commercial ceramics for dental applications obtaining improving the mechanical properties of the materials with a very important time and energy consumption reduction. Crown Copyright (C) 2015 Published by Elsevier Ltd and Techna Group S.r.l. All rights reserved.The authors would like to thank the financial support received from Universidad Politecnica de Valencia under Project 5P20120677 and Ministerio de Economia y Competitividad (MINECO) and co-funded by ERDF (European Regional Development Funds) through the Project (IEC2012-37532-C02-01). A. Borrell acknowledges the Spanish Ministry of Science and Innovation for her Juan de la Cierva Contract (JCI-2011-10498) and the Generalitat Valenciana for the financial support under Project GV/2014/009. A. Presenda acknowledges the Generalitat Valenciana for his Santiago Grisolia program scholarship (GRISOLLV2013/035). The authors would also like to acknowledge Prof. Dr. M. F. Sold from the Faculty of Medicine and Odontology at the Universidad de Valencia for supplying the commercial materials.Presenda, Á.; Salvador Moya, MD.; Penaranda-Foix, FL.; Moreno, R.; Borrell Tomás, MA. (2015). Effect of microwave sintering on microstructure and mechanical properties in Y-TZP materials used for dental applications. Ceramics International. 41(5, Part B):7125-7132. https://doi.org/10.1016/j.ceramint.2015.02.025S71257132415, Part

Risco de câncer de pulmão, laringe e esôfago atribuível ao fumo

OBJECTIVE:Lung, laryngeal and esophageal cancers have smoking as one of their main risk factors. The objective of this study was to evaluate the population attributed risk (PAR) of smoking for these forms of cancer. METHODS: The study was based in three case-control studies conducted in medium size cities in Brazil. Incident cases of lung cancer, laryngeal cancer and esophageal cancer seen at a hospital setting and diagnosed through biopsy were analyzed; controls were hospitalized patients with another diagnoses. Smoking was the exposure factor measured at three levels: non-smokers, former smokers and smokers, which were defined using a questionnaire applied by trained interviewers. For effect measure, odds ratio was used and the populational attributed risk for smoking was then calculated for a 95% CI. RESULTS: A total of 122 lung cancer cases and 244 controls, 50 cases of laryngeal cancer and 48 cases of esophageal cancer, and 96 controls for both of them were studied. The prevalence of smoking exposure was 34%, which is the overall prevalence of smoking in this city's adult population. Odds ratios (OR) for the PAR analysis were the adjusted OR for confounding variables from each study. Lung cancer PAR was 63% (95% IC, 0.58-0.68) for former smokers and 71% (95%IC, 0.65-0.77) for smokers. Larynx cancer PAR was 74% (95% IC, 0.70-0.78) and 86% (95%IC, 0.81-0.85) for former smokers and smokers, respectively. Esophageal cancer PAR was 54% (95%IC, 0.46-0.62) for smokers. CONCLUSION: Smoking is an avoidable risk factor and smoking cessation could be responsible for significant reductions in the incidence of these three forms of cancer.OBJETIVO: Os tipos de câncer de pulmão, laringe e esôfago têm como um de seus principais fatores de risco o fumo. O objetivo do estudo foi avaliar o risco populacional atribuível ao fumo nesses tipos de câncer. MÉTODOS: A pesquisa baseou-se em três estudos de caso-controle em cidade de médio porte do Brasil. Analisaram-se casos incidentes hospitalares de câncer de pulmão, de laringe e de esôfago diagnosticados por biópsias; os controles foram pacientes hospitalizados por outros motivos, sem ser câncer ou doenças altamente relacionadas ao fumo. O fator de exposição foi o tabagismo medido em três níveis: não-fumantes, ex-fumantes e fumantes atuais, definidos por meio de questionários aplicados por entrevistadores treinados. Para a medida de efeito, foi utilizado o odds ratio obtendo-se, dessa forma, o "risco populacional atribuível" ao fumo com IC de 95%. RESULTADOS: Foram estudados 122 casos e 244 controles de câncer de pulmão, 50 casos de câncer de laringe e 48 casos de câncer de esôfago, com um grupo de 96 controles comum a ambos. A prevalência da exposição ao fumo utilizada para a análise foi de 34%, que corresponde à prevalência de fumo na população adulta da cidade. Os odds ratios para o cálculo do risco populacional atribuível foram obtidos por análises ajustadas para os fatores de confusão de cada um dos estudos. Para ex-fumantes com câncer de pulmão, o risco populacional atribuível foi de 63% (IC95%, 0,58-0,68) e, para fumantes, de 71% (IC95%, 0,65-0,77). Para câncer de laringe, o RPA foi de 74% (IC95%, 0,70-0,78) para ex-fumantes e de 86% (IC95%, 0,81-0,85) para fumantes. O câncer de esôfago mostrou um risco de 54% (IC95%, 0,46-0,62) para fumantes. CONCLUSÃO: Conclui-se que o fumo é um importante fator de risco e que a cessação do mesmo contribuiria para reduções significativas na incidência de câncer nesses três sítios

Observation of the Baryonic Flavor-Changing Neutral Current Decay Lambda_b -> Lambda mu+ mu-

We report the first observation of the baryonic flavor-changing neutral current decay Lambda_b -> Lambda mu+ mu- with 24 signal events and a statistical significance of 5.8 Gaussian standard deviations. This measurement uses ppbar collisions data sample corresponding to 6.8fb-1 at sqrt{s}=1.96TeV collected by the CDF II detector at the Tevatron collider. The total and differential branching ratios for Lambda_b -> Lambda mu+ mu- are measured. We find B(Lambda_b -> Lambda mu+ mu-) = [1.73+-0.42(stat)+-0.55(syst)] x 10^{-6}. We also report the first measurement of the differential branching ratio of B_s -> phi mu+ mu- using 49 signal events. In addition, we report branching ratios for B+ -> K+ mu+ mu-, B0 -> K0 mu+ mu-, and B -> K*(892) mu+ mu- decays.Comment: 8 pages, 2 figures, 4 tables. Submitted to Phys. Rev. Let

The Brazilian Developments on the Regional Atmospheric Modeling System (BRAMS 5.2): An Integrated Environmental Model Tuned for Tropical Areas

We present a new version of the Brazilian developments on the Regional Atmospheric Modeling System where different previous versions for weather, chemistry and carbon cycle were unified in a single integrated software system. The new version also has a new set of state-of-the-art physical parameterizations and greater computational parallel and memory usage efficiency. Together with the description of the main features are examples of the quality of the transport scheme for scalars, radiative fluxes on surface and model simulation of rainfall systems over South America in different spatial resolutions using a scale-aware convective parameterization. Besides, the simulation of the diurnal cycle of the convection and carbon dioxide concentration over the Amazon Basin, as well as carbon dioxide fluxes from biogenic processes over a large portion of South America are shown. Atmospheric chemistry examples present model performance in simulating near-surface carbon monoxide and ozone in Amazon Basin and Rio de Janeiro megacity. For tracer transport and dispersion, it is demonstrated the model capabilities to simulate the volcanic ash 3-d redistribution associated with the eruption of a Chilean volcano. Then, the gain of computational efficiency is described with some details. BRAMS has been applied for research and operational forecasting mainly in South America. Model results from the operational weather forecast of BRAMS on 5 km grid spacing in the Center for Weather Forecasting and Climate Studies, INPE/Brazil, since 2013 are used to quantify the model skill of near surface variables and rainfall. The scores show the reliability of BRAMS for the tropical and subtropical areas of South America. Requirements for keeping this modeling system competitive regarding on its functionalities and skills are discussed. At last, we highlight the relevant contribution of this work on the building up of a South American community of model developers